civic help

[crf150]

whats required to swap a 94 civic from auto to manual. after buying a jdm gsr motor

[dumpdaccord]

tranny , linkage, clutch hard lines, clutch cylinders and resevoir, pedal assembly from manual civic 92-95.....i think thats it?

[Barefoot]

search


Auto to Manual Conversion

[Tree]

and i think the ecu... go to http://honda-tech.com and they will help you out. you never know they might hold your hand if you get lucky!!!

[jtaylor48]

The ECU is not completely different but it will require some wiring in order for it to work. Not too terribly hard though

[crf150]

few more things is the b16b easier b/c its a "civic" engine than say b18c. can it be done for like 4000 without the cost of the car. oh and the important thing will my a/c still work

[dumpdaccord]

few more things is the b16b easier b/c its a "civic" engine than say b18c. can it be done for like 4000 without the cost of the car. oh and the important thing will my a/c still work

for $4K you can buy a gsr swapped 5spd civic w/ bolton and probably any color you want....

[jtaylor48]

Why wouldn't your ac work? I don't think it really matters whether its a civic or integra motor. If you are doing a swap then get the ecu/wiring harness for the new motor and get it put into your car, and while everything is out put in the clutch master cylinder, hard lines if the transmission is pneumatic, the pedal assembly and the shift linkage. You'll have to cut the floor a little.