First, I would like to say sorry to Phillip for taking so long on this swap. Second, I would like to let everyone know the whole story. The swap is a RSX K20 into a 02 Civic EX. This is also a AUTO to MANUAL conversion in a car that has a sensor to tell you if you shit stinks or not. The wiring is a little more complicated then a standard swap. As far as the car being here for 3 monthes that is true. However, the car came with a blown tranny. You took about 2 week before you decided to do the swap. This means I had to then find a complete front clip since I needed everything for the auto to manual. This took time. I found a K20 auto but you wanted a manual. I then found a K20 manual swap but no clutch pedal, master cylinder, subframe, etc. It took time to find a front clip with 7k miles for your budget. Once the front clip was here we have worked on it as much as we can. We got as far as we could with out the mounts here. Sorry, not many people stock mounts for a swap that has only been done a few times in the entire country. Yes, I have the axles now but it took a while to locate the proper ones (must use 02 SI because RSX is 5 lug). I could have gotten them at the dealership but I am trying to stay with in your budget. I am now trying to get all the wiring diagrams that we need to finish the wiring.

Again, sorry for taking so long but there is not a lot of info on this swap so it takes more research which take more time. You can go find instructions on how to put a b-series in an EG writen by a 5 year old that did it for show and tell. Also, ask the teal green one that you see on Barrett how long his swap took (the only other one in the state that we know of). I think we are beating their record.