Quote Originally Posted by CD5accord
you need motor mounts for an 92-95 h22 prelude, you might be able to use you h23 engine harness and run vtec and oil pressure from motor to ecu. An obd1 distributor and a p13 ecu, u suggest u get a p72 or p28 so you can chip and tune. Use your tranny,flywheel, flywheels bolts and axles.
i agree with everything above and your also going to have to convert everything on the motor to OBD1 Distributor (already been said), and also intake manifold/manifold sensors. Your motor stock motor mounts should be fine except for the tranny mount... but if you use your stock tranny that should be fine as well