Page 3 of 3 FirstFirst 123
Results 81 to 114 of 114

Thread: Mustang Roll Call

  1. #81
    Senior Member onebadgt's Avatar
    Join Date
    Apr 2007
    Age
    39
    Posts
    1,870
    Rep Power
    20

    Default

    Quote Originally Posted by OTG Signs
    Neither are too much gear for the street, even with 460rwhp like my Bullitt had.
    excuse me there to much for me. with 4.30 your in 5th hear by 50 and cruise at 70 at lie 3500rpms.

    and if you have much over 450whp you will hafta shift into 5th at the 1/4 track which blows!


    2006 mustang gt
    gears
    bolt-ons

  2. #82
    Senior Member ueyedgr8tness's Avatar
    Join Date
    Jul 2006
    Location
    buford ga
    Age
    39
    Posts
    4,685
    Rep Power
    29

    Default

    Quote Originally Posted by onebadgt
    excuse me there to much for me. with 4.30 your in 5th hear by 50 and cruise at 70 at lie 3500rpms.

    and if you have much over 450whp you will hafta shift into 5th at the 1/4 track which blows!

    and here is a car at the track when it hits 5th

    ----------
    -
    -
    -
    -
    -
    -
    I check sluts off my list like a maintnence man
    I drive a low is3 just so it gives me a reason to drive super slow on these rough ga roads.

  3. #83
    LCpl; USMC EvasiveEF9's Avatar
    Join Date
    May 2005
    Location
    San Diego, CA
    Age
    39
    Posts
    8,798
    Rep Power
    30

    Default

    Quote Originally Posted by OTG Signs
    IIRC, 3:31.
    Uh...just happened to be under the tail end of my car.

    The pumpkin has a decal that says "3.55" and then some other crap. Is it factory or aftermarket has 3.55...?
    JDMadness ==> EvasiveEF9

  4. #84
    sukanigadikosum DieselNuts's Avatar
    Join Date
    May 2005
    Location
    niggaville USA;via, Atlanta, Georgia
    Posts
    7,907
    Rep Power
    32

    Default

    Mine has factory 3.55s, but its an 04

  5. #85
    LCpl; USMC EvasiveEF9's Avatar
    Join Date
    May 2005
    Location
    San Diego, CA
    Age
    39
    Posts
    8,798
    Rep Power
    30

    Default

    06 5spd GT 4.6L here...not trying to brag, just lettin' it be known what I've got...but so hopefully I can figure out what the hell I have, LoL.
    JDMadness ==> EvasiveEF9

  6. #86
    Senior Member onebadgt's Avatar
    Join Date
    Apr 2007
    Age
    39
    Posts
    1,870
    Rep Power
    20

    Default

    the only options in the 06 5 spd are 3.55 so that is what you have. in 07 you could get 3.55 or 3.31!


    2006 mustang gt
    gears
    bolt-ons

  7. #87
    LCpl; USMC EvasiveEF9's Avatar
    Join Date
    May 2005
    Location
    San Diego, CA
    Age
    39
    Posts
    8,798
    Rep Power
    30

    Default

    Quote Originally Posted by onebadgt
    the only options in the 06 5 spd are 3.55 so that is what you have. in 07 you could get 3.55 or 3.31!
    I wish I was getting better gas mileage with the 3.31, but...hell, I guess that's the price you pay for a quicker jump from the line...
    JDMadness ==> EvasiveEF9

  8. #88
    kodak disposable ftw Dwisforme05's Avatar
    Join Date
    Sep 2007
    Location
    Canada..like america but better
    Posts
    3,580
    Rep Power
    26

    Default

    i wish i had at least 3.55's 3.31s are LONG ASS GEARS.
    I CAN HAZ 8 CYLINDERS?

    Cameron Flaisch Photography
    Canon Shooter


  9. #89
    LCpl; USMC EvasiveEF9's Avatar
    Join Date
    May 2005
    Location
    San Diego, CA
    Age
    39
    Posts
    8,798
    Rep Power
    30

    Default

    Quote Originally Posted by Dwisforme05
    i wish i had at least 3.55's 3.31s are LONG ASS GEARS.
    They're cheap enough...

    What gas mileage do you pull with 3.31? Assuming you've got a 4.8...
    JDMadness ==> EvasiveEF9

  10. #90
    kodak disposable ftw Dwisforme05's Avatar
    Join Date
    Sep 2007
    Location
    Canada..like america but better
    Posts
    3,580
    Rep Power
    26

    Default

    you mean a 4.6? i have a Boosted 4.0 v6. i get about 19-20 in the city, and 28 on the highway.
    I CAN HAZ 8 CYLINDERS?

    Cameron Flaisch Photography
    Canon Shooter


  11. #91
    LCpl; USMC EvasiveEF9's Avatar
    Join Date
    May 2005
    Location
    San Diego, CA
    Age
    39
    Posts
    8,798
    Rep Power
    30

    Default

    *shakes head*

    my bad. It's been a long day working on a sikorsky, LoL. Numbers like 110, 92, 3000, 1500, and 4,380 are swirling in my head...

    Not bad gas mileage...how does it do on a dyno? I bought a V8 to own a manly man's car, but the more I see of these V6's, the more I'm impressed.
    JDMadness ==> EvasiveEF9

  12. #92
    kodak disposable ftw Dwisforme05's Avatar
    Join Date
    Sep 2007
    Location
    Canada..like america but better
    Posts
    3,580
    Rep Power
    26

    Default

    im happy with my car, i always get the "oh why didnt you buy a v8" story but ****, i love the fact that i spent less on my car plus the mods then a gt would have cost me, and i make more power. right now its putting out about 300rwhp and 285 rwtq.
    I CAN HAZ 8 CYLINDERS?

    Cameron Flaisch Photography
    Canon Shooter


  13. #93
    Senior Member onebadgt's Avatar
    Join Date
    Apr 2007
    Age
    39
    Posts
    1,870
    Rep Power
    20

    Default

    Quote Originally Posted by Dwisforme05
    i wish i had at least 3.55's 3.31s are LONG ASS GEARS.
    i have some 3.55s in my garage if you want em lol!


    2006 mustang gt
    gears
    bolt-ons

  14. #94
    LCpl; USMC EvasiveEF9's Avatar
    Join Date
    May 2005
    Location
    San Diego, CA
    Age
    39
    Posts
    8,798
    Rep Power
    30

    Default

    Quote Originally Posted by Dwisforme05
    im happy with my car, i always get the "oh why didnt you buy a v8" story but ****, i love the fact that i spent less on my car plus the mods then a gt would have cost me, and i make more power. right now its putting out about 300rwhp and 285 rwtq.
    Damn, that's the way to roll. I HALFWAY regret not buying a V6, but I'm still in love with the sound of this motor...
    JDMadness ==> EvasiveEF9

  15. #95
    kodak disposable ftw Dwisforme05's Avatar
    Join Date
    Sep 2007
    Location
    Canada..like america but better
    Posts
    3,580
    Rep Power
    26

    Default

    oh there is no doubt that the 4.6 sounds better! i like my sleeper tho lol.
    I CAN HAZ 8 CYLINDERS?

    Cameron Flaisch Photography
    Canon Shooter


  16. #96
    kodak disposable ftw Dwisforme05's Avatar
    Join Date
    Sep 2007
    Location
    Canada..like america but better
    Posts
    3,580
    Rep Power
    26

    Default

    Quote Originally Posted by onebadgt
    i have some 3.55s in my garage if you want em lol!

    hahah will you throw in a 8.8 rear end?! lol
    I CAN HAZ 8 CYLINDERS?

    Cameron Flaisch Photography
    Canon Shooter


  17. #97
    Senior Member onebadgt's Avatar
    Join Date
    Apr 2007
    Age
    39
    Posts
    1,870
    Rep Power
    20

    Default

    o ya good point. duh!


    2006 mustang gt
    gears
    bolt-ons

  18. #98
    FNG
    Join Date
    Nov 2007
    Location
    Warner Robins
    Age
    41
    Posts
    18
    Rep Power
    0

    Default

    I guess I'll finally chime in on this thread.

    '01 Mineral Grey Cobra
    Promotion T45
    Aluminum flywheel
    Centerforce Dual Friction Clutch
    UPR quadrant/firewall adjuster
    SRA with 4.30's
    JLT CAI
    FLowmasters

    All work done by previous owner, I've done nothing more then put gas/oil in it at this point. Once I get some other bills paid off then I'll start modding. That'll probably consist of forged rods/pistons and some sort of forced induction. I'm about half drunk right now so I'll post some pics later.
    WTB: B13 SE-R, PM me

  19. #99
    HEY EVERYBODY! Me86Rob's Avatar
    Join Date
    May 2008
    Location
    Stone Mountain
    Age
    36
    Posts
    5,965
    Rep Power
    31

    Default

    hm......1989 hatch. 2.3, T5, home made CAI. 35 mpg never looked so good!
    Attached Thumbnails Attached Thumbnails -l_101caf9ff286a26339eaed0f85ff7de3-jpg   -l_292af1edc03f3902092aae61e056bb22-jpg   -sally-jpg  

  20. #100

    Default

    1995 mustang gt with flowmaster 40s and gay 2.73 stock gears.

  21. #101
    VTECKLR amped4life33's Avatar
    Join Date
    Jan 2008
    Location
    Rome Ga
    Age
    36
    Posts
    404
    Rep Power
    18

    Default

    Well when i totaled my 350z i had a choice between a GT or a supercharged V6, and to be honest with you, the unmatched sound of a mustang GT is what made my decision for me...

    at any rate...

    2006 Mustang GT
    JLT Cold Air Intake
    BamaChips 91 octane tune
    Cervini's Pypes side exhaust kit

    Im workin on the full Eleanor kit but all I have so far is the exhaust, back bumper, side skirts and spoiler...hopefully ill get the hood and front bumper by christmas and the scoops and louvers just whenever i have a little spare cash...ive only had the car since..eh? Mayish? lol



    Last edited by amped4life33; 09-10-2008 at 02:07 PM.
    **Original photo by CF Photography**

  22. #102
    LCpl; USMC EvasiveEF9's Avatar
    Join Date
    May 2005
    Location
    San Diego, CA
    Age
    39
    Posts
    8,798
    Rep Power
    30

    Default

    Lookin' good...

    That's the reason I bought mine. That friggin' sound...
    JDMadness ==> EvasiveEF9

  23. #103
    kodak disposable ftw Dwisforme05's Avatar
    Join Date
    Sep 2007
    Location
    Canada..like america but better
    Posts
    3,580
    Rep Power
    26

    Default

    dont hate! lol. car looks good jordo.
    I CAN HAZ 8 CYLINDERS?

    Cameron Flaisch Photography
    Canon Shooter


  24. #104
    Bullitt #3590 nadaklu's Avatar
    Join Date
    Feb 2006
    Location
    Central GA
    Age
    37
    Posts
    27
    Rep Power
    0

    Default My 2001 Bullitt

    Was walking through a Toyota dealership and came acrossw hat I thought was a normal 2001 black GT when I realized upon closer inspecition it was a 2001 Bullitt which they only made about 1800 of in black. I didn't want to pass it up so two days later my RSX was gone and I bought this












  25. #105
    Public Enemy #1
    Join Date
    Jun 2005
    Location
    Kennesaw
    Posts
    11,300
    Rep Power
    37

    Default

    ^^^^^ gratz on the purchase! anything done to it yet!

  26. #106
    kodak disposable ftw Dwisforme05's Avatar
    Join Date
    Sep 2007
    Location
    Canada..like america but better
    Posts
    3,580
    Rep Power
    26

    Default

    i loooove the bullits. new and older models.
    I CAN HAZ 8 CYLINDERS?

    Cameron Flaisch Photography
    Canon Shooter


  27. #107
    VTECKLR amped4life33's Avatar
    Join Date
    Jan 2008
    Location
    Rome Ga
    Age
    36
    Posts
    404
    Rep Power
    18

    Default

    Quote Originally Posted by TransAxle
    ^^^^^ gratz on the purchase! anything done to it yet!
    The bullit has sort of a heritage...you dont wanna change it that much really..


    and thanks cam...i appreciate the pics..
    **Original photo by CF Photography**

  28. #108
    LCpl; USMC EvasiveEF9's Avatar
    Join Date
    May 2005
    Location
    San Diego, CA
    Age
    39
    Posts
    8,798
    Rep Power
    30

    Default

    GOOD FIND!

    Be sure to black-out your license plate in your pictures, though!
    JDMadness ==> EvasiveEF9

  29. #109
    VTECKLR amped4life33's Avatar
    Join Date
    Jan 2008
    Location
    Rome Ga
    Age
    36
    Posts
    404
    Rep Power
    18

    Default

    Quote Originally Posted by EvasiveEF9
    GOOD FIND!

    Be sure to black-out your license plate in your pictures, though!
    Why is that? It doesnt make you any safer...
    **Original photo by CF Photography**

  30. #110
    LCpl; USMC EvasiveEF9's Avatar
    Join Date
    May 2005
    Location
    San Diego, CA
    Age
    39
    Posts
    8,798
    Rep Power
    30

    Default

    How do you figure? I've heard stories of people getting in trouble for illegal activities due to license plates being pictured on the net. Or, people using license plates as an identity to look up the "home address" of a car and strip it. Seeing as we tend to post alot about our cars on the net, what's been done to them, and how much money is involved with them...I personally would prefer not to have the risk of someone tracking my license plates...

    Why do you think most other people do it? For example...the one in your sig...
    JDMadness ==> EvasiveEF9

  31. #111
    VTECKLR amped4life33's Avatar
    Join Date
    Jan 2008
    Location
    Rome Ga
    Age
    36
    Posts
    404
    Rep Power
    18

    Default

    well a buddy of mine made the sig for me..and i guess i see what your saying its just...like if i saw a car i liked on here...well chances are theres one in my town atleast similar to it...so...instead of going through all the trouble to look up the identity of that person i could just go get the one near me...i mean dont get me wrong i guess it makes it a little easier for someone to hunt you down and take your stuff but...a theif is a theif and if hes not stealin from you hes stealing from someone else...so..i dunno i guess its a little safer but not much...
    **Original photo by CF Photography**

  32. #112
    LCpl; USMC EvasiveEF9's Avatar
    Join Date
    May 2005
    Location
    San Diego, CA
    Age
    39
    Posts
    8,798
    Rep Power
    30

    Default

    Let's say you see a ford f150 online, and it's got a suede headliner, custom fiberglass/sued lined ipod mount and hookup leading to a 1200$ touchscreen/nav/dvd screen pushing out to a custom box with a 10" competition sub in it, two more tv screens in the headrests, and xbox360 under the seat, and a few other neat little gadgets inside...let alone the HID headlights, suspension work, wheels and tires on the truck, and you KNOW all of this to be on this particular truck two towns over...and you're risking yourself to break into and/or steal the truck altogether, are you going ot make it worth your time to find and pick up this truck, or settle for stealing one down the street that's bone stock? You can steal out the equipment and part it out, and never be traced. You can then choose to chop the truck, or ditch it, whatever, making all that money. Which one are you gonna choose?

    I say this example because that's EXACTLY what happened to my buddy's truck. He's still recovering the losses. The guy was never caught, and there are no leads on who did it.
    JDMadness ==> EvasiveEF9

  33. #113
    kodak disposable ftw Dwisforme05's Avatar
    Join Date
    Sep 2007
    Location
    Canada..like america but better
    Posts
    3,580
    Rep Power
    26

    Default

    ^^ true
    I CAN HAZ 8 CYLINDERS?

    Cameron Flaisch Photography
    Canon Shooter


  34. #114
    The One and Only Nemesis's Avatar
    Join Date
    Apr 2005
    Location
    Buckhead
    Age
    42
    Posts
    25,171
    Rep Power
    62

    Default

    That bullitt is clean. Congrats on the purchase

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!