PCV Valve question please look!

[speedminded]

The PCV is located on the Intake manifold, should be between 4 & 3 on the manifold (closer to the head). You'll see a hose running from the manifold to the back of the block. By changing the valve cover you're completing nothing.

lolol You do know what the PCV valve is right? Positive Crankcase Ventilation...crankcase being the keyword there

[Grimm Reeper]

lolol You do know what the PCV valve is right? Positive Crankcase Ventilation...crankcase being the keyword there

I'll keep myself humble by just saying read what I wrote, READ being the keyword in this sentence. He's looking for it on a LS, LS Intake Manifolds are somewhat similar to Si's, which I've built from scratch.



Ohhh and here's the thread that was opened before this one:
Whining Noise from B18B1

[speedminded]

I'll keep myself humble by just saying read what I wrote, READ being the keyword in this sentence. He's looking for it on a LS, LS Intake Manifolds are somewhat similar to Si's, which I've built from scratch.



Ohhh and here's the thread that was opened before this one:
Whining Noise from B18B1

So you're saying they don't have a PCV chamber and the hose goes from the block up to the intake manifold where a PCV valve is?

[Grimm Reeper]

So you're saying they don't have a PCV chamber and the hose goes from the block up to the intake manifold where a PCV valve is?

If you read carefully

You'll see a hose running from the manifold to the back of the block.

I mean that's what I said to break it down for the guy......... he has seemed to of found it..............and......ummmmmmmmmmmm...........w ell I gave a clear indication of where it........................could be..............



/end

you've built an SI from scratch?

dang, you must have some serious metal working skills

reps
-jonathan

Hellz Yea........

[ash7]

He's looking for it on a LS, LS Intake Manifolds are somewhat similar to Si's, which I've built from scratch.

you've built an SI from scratch?

dang, you must have some serious metal working skills

reps
-jonathan