putting on exhaust

[integraguy06]

my exhaust finally came in today off of ebay, and the seller was speedneedz, just FYI dont buy anything from him, im missing a bolt and a screw and part of the muffler tip is bent.. and it was supposed to be never opened packaging and stuff... anyway my question is once i get this set straight anyone know a good cheap place i could put it on? preferably around marietta/kennesaw?

[integraguy06]

dont know if this is even in the right section but just wanted to ask

[Z0_o6]

if it's a bolt-on catback why not just DIY? 4-6 bolts, a few rubber hangers and a little time.

[integraguy06]

i just dont have a way of lifting it up high enough to do it

[speedminded]

i just dont have a way of lifting it up high enough to do it

sure you do! Go to a parking lot and put both right wheels on a curb. Still a little awkward snaking the exhaust out from above the suspension but it works. Ask me how i know haha

[integraguy06]

sure you do! Go to a parking lot and put both right wheels on a curb. Still a little awkward snaking the exhaust out from above the suspension but it works. Ask me how i know haha

haha id rather not pull it off the ghetto way... my friend has a lift but he wont be from from southern for about 2 weeks so im just trying to see what my options are

[yudalicious]

I did some searching, and I came up with this device called the jack that's supposed to lift your car up. I've also heard of this other device called the jack stand... not sure if they exist, could be mythical creations after all.

[integraguy06]

I did some searching, and I came up with this device called the jack that's supposed to lift your car up. I've also heard of this other device called the jack stand... not sure if they exist, could be mythical creations after all.

really? u know i had no idea ... i was looking for someone that had one that would have been nice enough to show a "new" person to the tuner world who doesnt own a jack yet...

[JDMirza]

Come to Curry Honda I'll do it for free. ::Shrugs.:: After 5 only.

[sidewaysS13]

Buy some ramps, it comes in handy. It'll take you about 30 mins to install it.

[tony]

I installed my exhaust this weekend and trust me.. if I can do it anyone can. Roll your sleeves up, and get a couple of beers.

[integraguy06]

Buy some ramps, it comes in handy. It'll take you about 30 mins to install it.

never thought about that, appreciate it man

[Ran]

I'm free this weekend and I'm outta beer. I can come to Kennesaw with a jack, some stands, and tools. You supply the beer and I'll put your exhaust on. lol

[dp32185]

if you really want it on...and noone around you is offering help, take a drive to athens. i'll help you out.

[Blitanicle99]

Gettin a little impatient eh? lol

[integraguy06]

I'm free this weekend and I'm outta beer. I can come to Kennesaw with a jack, some stands, and tools. You supply the beer and I'll put your exhaust on. lol

ya man illbe in east cobb for the next couple days, around marietta, but ya man where around do u live

[integraguy06]

Gettin a little impatient eh? lol

u know me travis, i wanna get it on ASAP, i hate looking at it sitting here and not being able to put it on

[Blitanicle99]

If you had tools I would say go borrow my ramps from my house.

[integraguy06]

If you had tools I would say go borrow my ramps from my house.

matt has the jack stands, and tools so that would be cool alright man

[GaGen2Teg]

ill do it for you

[Ran]

ya man illbe in east cobb for the next couple days, around marietta, but ya man where around do u live

I'm in Canton and Marietta is like a 15min drive. I responded to your PM. I'm free pretty much all weekend. Just give me a time and an address.

[integraguy06]

ya i got the PM, and thanks i appreciate it, ill let u know if we dont get it on today

[integraguy06]

so i finally got the exhaust on everyone, but with 1 little problem... one of the bolts on the cat broke when we were taking the nut off because is was too rusty and corroded... i have the extra bolts and nuts for it, but we couldnt get them off because they were too rusty... im thinking we can just cut them off and drill the hole where the rest of it is, anyone know of any other ideas or if this will even work? rep for help :-)

[itsnotarex]

Buy some ramps, it comes in handy. It'll take you about 30 mins to install it.

FTW. This gets my car high enough in the air. Put them under the back wheels, I'm guessing. That would give you enough room to work. They're generally a good investment overall as you can change your oil with them too. Good Luck!

[integraguy06]

FTW. This gets my car high enough in the air. Put them under the back wheels, I'm guessing. That would give you enough room to work. They're generally a good investment overall as you can change your oil with them too. Good Luck!

umm, i just posted saying i already got it on, but thanks... i was just wondering about the bolts on the cat, if there were any good ways of taking off a really fu*cking rusty bolt