auto to manual conversion

[ulbsry02]

im going to do the conversion, but can anyone give me a list of the parts i will need? thanx in advance.
99-00 civic hatch

[GaGen2Teg]

what car would be nice to know

[ulbsry02]

sorry fixed

[GaGen2Teg]

http://www.honda-tech.com/zerothread?id=1337459&page=1

[.blank cd]

since your car is OBD2, you'll need a same-year computer from a 5spd car, transmission, starter from a 5 speed, transmission mount, shifter, and assuming its a hydraulic trans, you'll need a master cylinder, resivoir, slave, shifter assembly, linkage, all the hardware, a shift boot and a knob

[Got Milk?]

since your car is OBD2, you'll need a same-year computer from a 5spd car, transmission, starter from a 5 speed, transmission mount, shifter, and assuming its a hydraulic trans, you'll need a master cylinder, resivoir, slave, shifter assembly, linkage, all the hardware, a shift boot and a knob

god damn, might as well sell that car, and but u the same car with a manual tranny.

[.blank cd]

its not as bad as it looks. hard part is sourcing all the parts together. I have to do mine, all my stuff can be had for 500 bucks or so. but im waiting on the H to come around so i'll do it all at the same time. If you plan on swapping the motor to a B series, i would wait untill you did that and do it all at once. No point in buying 2 transmissions

[ulbsry02]

yeah i do plan on the B swap, thanks for all the info

[EmminoDaGreat]

if you need the swap done let me know.