You have to tap the oil feed hole in the head and plug it. Then you use the sandwich plate that comes with the kit and put it behind you oil filter. The new oil feed line hooks up to the sandwich plate and you run it to your head where you remove a plug. The dowel pins are also different sizes. It is easiest to use the golden eagle kit since it comes with everything including the tap,plug,dowel pins,sandwich plate,head gasket,oil line, and instructions. The cheapest place i found the kit was on Honda-tech for 200 shipped. You will also need different radiator hoses. It is also recommended to use arp head studs or at least ls or b20 head bolts since the vtec ones are shorter. All the ls head bolts are the same except for the two center ones which are longer, you need to replace them with shorter ones that match the rest.