B-Series Guru's

[jdm_91crx]

Under the passenger dash, take the panel in the corner off and you'll see the ECU an blue connector hanging above.

Next, jump the blue connector with a wire (insert both ends of wire into the blue connector) , Don't worry, your car will not explode...


Next, insert your keys to ignition and turn it to see the what code you have. Use the check engine light to indicate what code. For ex:


If you still have trouble figuring this out, go to this link: http://www.honda-tech.com/zerothread?id=978933

Codes are also on the link above, hope this helps bro....

[1flysi]

You could also go to advance auto or auto zone and they will check it for free.

[speedminded]

Under the passenger dash, take the panel in the corner off and you'll see the ECU an blue connector hanging above.

Next, jump the blue connector with a wire (insert both ends of wire into the blue connector) , Don't worry, your car will not explode...


Next, insert your keys to ignition and turn it to see the what code you have. Use the check engine light to indicate what code. For ex:


If you still have trouble figuring this out, go to this link: http://www.honda-tech.com/zerothread?id=978933

Codes are also on the link above, hope this helps bro....

or just go to autozone and have it run fo freee and don't need to spend the time countin blinks But i do that way myself too