any b-series tranny swap tips?

[Mr. Clean]

thanks man... at least i got one reply if nothing else haha

[1flysi]

I normally remove all the wiring on the tranny, drain the tranny,pull the axles, remove the starter, remove all the tranny bolts, don't forget the one on the bottom rear going the oppisite way, then remove the passenger side and rear mount bolts. have a jack under the tranny while you are removing the motor mounts. Then lower the jack and it should slide off.

[slow_hatch]

Axle nuts are a b!tch, that is all

[speedminded]

Axle nuts are a b!tch, that is all

That's what i was gonna say

If they haven't been off in a while hope you have a breaker bar!