Anyone? No google, or searches. I'm just curious as to what the population thinks.![]()
Anyone? No google, or searches. I'm just curious as to what the population thinks.![]()
engine runs on gas, motor is electric.
An engine is a motor, but not vice-versa.
engine is what is in a car, a motor is a name for anything (electric/gas/air) thats causes something to do whats its supposed too.
engines are in - car, mower, go cart, plane
motors are in - all the above, impact guns, remote control cars, ceiling fans, power garage doors
thats my input, sounds good to me
- 1993 Honda Civic VX
- 2008 Acura TL-S
Motors simply rotate.
Engines are pumps that have directional energy changed to rotaional by a crankshaft.
YEah What They said.....
Chris Weeks![]()
478-390-2855
no difference whatsoever, unless you want to argue strict and true definition. The fact is, the general populous uses the terms interchangeably, therefore nullifying the almighty Webster's definition of each. An engine, or a motor, can, and will continue to be the same thing.
Who knows?
well if you wanna get technical, to me a motor in general is something electrical, and an engine is something thats stuck in cars that eats gas all day LoL
sure all engines are motors, but not all motors are engines. either way everything is known as a motor, when you replace your engine i doubt anyone is calling it a engine swap (that often), all ive ever heard is motor swap.
- 1993 Honda Civic VX
- 2008 Acura TL-S
Originally Posted by hondabuilder
![]()
If you want to get nit picky, then IMO an engine is an air pump, a motor is electric.
All Engines are motors, not all motors are engines.
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
bingo!Originally Posted by DaRussian
exactly.Originally Posted by dorin48
you said it!Originally Posted by 1siccEJ2
I refuse to call an internal combustion engine a motor. The starter is a motor, the alternator can be a motor with modifications, but the engine is not a motor. It's an engine. Motors turn electrical energy into mechanical energy. Engines turn thermal energy into mechanical energy. Two completely different things.![]()
just to play devil's advocate here...
while i completely agree that you are exactly correct in definition, doesn't the general usage of a word normally dictate the definition?
Who knows?
engine power by fuels(coal, gas, propane, etc)
motor is electric
...and would you agree the improper usage of a word displays ignorance?Originally Posted by hondabuilder
![]()
Proper use of either word wouldn't make any sense today within this context, and thats the point. They are both Latin, and the meanings change with every dictionary you look at.
Not sure, but doesn't it change by region too? I imagine in other areas of the country they're all motors and engine is weird to them; ya know Coke/pop
Engine is not belt driven as a motor is driven by a tensioning rod spring.
Originally Posted by simontibbett
electric motor?
A linguist advocating the prescriptivist's theory of language would agree with you, as well as some dictionaries.Originally Posted by hondabuilder
Please tell me if you think my car looks good. But don't tell me if you think it's ugly - only on IA
I agree with this guy the mostOriginally Posted by Schugg
if so then why is an engine/tranny commonly referred to as a motorset?
More specifically i'd call my Longblock a motor, where the engine is the whole 9 yards, the longblock, manifolds, alternator, etc... Which is why when you go to the machine shop, they refer to everything as motors.
For example. Would you call a contraption which turns air pressure from an air compressor into mechanical motion through the use of a turbine an engine? I'd call it a motor. No electricity involved (except for maybe the spark in the compressor ENGINE lol, but thats irrelevant) There is a "motor" inside an air impact, a car, a turbine engine for a jet, a motor in a r/c car.
If motor always referred to an electric motor, then why would people specify when saying "Electric motor", wouldn't they just say motor?
This is true, even moreso they change from place to place as well. In Pakistan/India the word "motor" refers to an "automobile"...Originally Posted by skillzilla
Very interesting opinions, and some good points! Keep them coming!
i look at it this way, is logic (as the average person understands it) still logic if only one person believes it? same property. i could reverse the definitions completely and believe it, thefore, to me, the definitions are true and correct. therefore majority rules on the subject. man i love arguing bull**** like this, just because, in the end it's a moot point anyways.
Originally Posted by speedminded
Who knows?
I 100% agree with you on this. My auto mechanics teacher would refuse to answer anyone's question when they refered to the engine as a motor. He would usually reply, "what motor? the windshield wiper motor?" I thought it was pretty funny, but that brings me to my next point...Why is it called a MOTORcycle? I asked him and he didnt know. Honestly, I dont know if anyone does...Originally Posted by speedminded
Why do people call an Automatic Teller Machine an "ATM machine"?Originally Posted by RandomGuy
Try Google Images:
Motor
Engine
In the early years of automobiles in Europe they were called motorcars or motorcoach. You mentioned motorcycles but don't forget about motorboats too. So is it a boat engine or boat motor? They're internal combustion engines but most everyone refers to them as motorsOriginally Posted by DieselNuts
Plus you have "motorsports" and don't forget about track names...Atlanta Motor Speedway, Lowe's Motor Speedway, etc. But they're circle tracks so I write them off as ignorance![]()
lol, reps because of the last paragraphOriginally Posted by speedminded
![]()
"Motor" can be used as a verb to describe motion too, that's why the English language is the most difficult, there is nothing "cut and dry" about it. Where the hell does "cut-and-dried" come from? lolOriginally Posted by DieselNuts
lol, yeah, or tounge & groove?Originally Posted by speedminded
tongue and groove is from wood working...been around for a longgg time.Originally Posted by DieselNuts
I guess cut-and-dried is referring to the simplicity of a hair cut but ionno![]()
well, i knew that, but where the hell did they come up with it? I mean seriously, who would think "tounge" when working with wood?Originally Posted by speedminded
I always like a little tounge when my wood is being worked with!Originally Posted by DieselNuts
You got that right!Originally Posted by quickdodgeŽ
Cut and dried comes from the tobacco ind.... Tobacco is cut then dried. After that is is done. Hence cut and dried
Chris Weeks![]()
478-390-2855
Interesting. Repped.Originally Posted by MaconPerformance