240sx clutch line question

[Killswitch Performance]

To bleed the system you either need two people or speed bleeders. You close the bleeder valve on the Slave, pump the clutch, then hold it down. Open the bleeder, then close. Pump the clutch. Repeat. Make sure you don't run out of brake fluid, or you'll be doing it again.

Tyler

[Benefit]

To bleed the system you either need two people or speed bleeders. You close the bleeder valve on the Slave, pump the clutch, then hold it down. Open the bleeder, then close. Pump the clutch. Repeat. Make sure you don't run out of brake fluid, or you'll be doing it again.

Tyler

yup

[chituntang]

To bleed the system you either need two people or speed bleeders. You close the bleeder valve on the Slave, pump the clutch, then hold it down. Open the bleeder, then close. Pump the clutch. Repeat. Make sure you don't run out of brake fluid, or you'll be doing it again.

Tyler

It is funny that you say brake fluid... J/K