so did you get everything straight. HEAVYTHROTTLE is where i got all my parts. They sell a S13 sr to S14 chassis heater hose kit. It is composed of 3 hoses and a coupler. there is a S shaped hose that goes from the connection right under the intake to the lower heater hose nipple, a U shaped hose that goes on the driver side of the motor. then you take the coupler and attach the remaining L shaped hose to the U hose and you just connect the L to the valve coming from the top heater hose nipple. I've had no problems so far. I also got the KA ac compressor on rather than the sr so there was no custom lines that I needed built. just a simple bracket setup i got from CodyAce @ freshalloy.