I WANT 350 WHP

**vancem3m3** · 10-18-2007, 08:16 PM

I GOT EAGLE RODS AND A 50 TRIM TURBO BUT I DONT KNOW WANT PISTONS TO GET WILL STOCK PISTONS HOLD UP? ANYONE GOT WHAT I NEEED??

**ATK_Designs** · 10-18-2007, 08:27 PM

that's really helpful with the info provided. I assume you have an M3???

**Z33_kid** · 10-18-2007, 08:28 PM

i assume he has a gsr

**Revmaynard** · 10-18-2007, 08:30 PM

Yea, my huffy is holding on with stock pistons.

I figure you have a car you wanna boost?

**madking411** · 10-18-2007, 08:50 PM

'EAGLE RODS'....I thought he had an Eagle Talon when i first read that....guess not

**Thighs** · 10-18-2007, 08:52 PM

wtf is this guy talking about?
all i got out of his post is that he wants to boost his car...?

**Gutling** · 10-18-2007, 08:57 PM

Yea, I got what you need

**RX4BRDM** · 10-18-2007, 09:33 PM

Pistons should be fine, and usually are fine, its the connecting rods you need to worry about, although they may be strong enough aswell if they are forged.

**EmminoDaGreat** · 10-18-2007, 09:52 PM

you need to get aftermarket pistons, the b series ringlands will crack either before you make it or shortly after.

**Gutling** · 10-18-2007, 09:59 PM

whats in a gsr? i had a b16a boosted to ~300whp and it was completly factory, and held fine

**NAG2I** · 10-18-2007, 10:03 PM

if he has forged rods though hes gonna need pistons too

**Master Shake** · 10-18-2007, 10:15 PM

Originally Posted by Z33_kid

i assume he has a gsr

x2
i think the little tag under his username "boosted gsr" gives it away. reps

**scttydb411** · 10-19-2007, 12:41 AM

get forged pistons michael. the stock ones won't last at that goal.

**Z U L8R** · 10-19-2007, 07:34 PM

then get a 350 shot of nitrous OMIGAW DUH!

**EmminoDaGreat** · 10-19-2007, 10:02 PM

shut up foo. get that tranny in.

**Spektrewing386** · 10-19-2007, 11:18 PM

i hate when all people post is "i want my hatchback to have 230hp... what do i need?"

well duh its so obvious.

maybe this guy has a Mitsubishi Lancer EVO IX GSR?

hes probably too embarassed to post a 1 sentance question when it should have been at least 5 sentances and he didnt even tell us what engine it is for. he didnt even tell us what turbo it is or how many PSI hes going to run or any of the supporting equipment for it. IMHO this guy isnt even ready to even start thinking about turboing his car.

oh yeah:
CAPS LOCK IS GAY

**Thighs** · 10-20-2007, 12:13 AM

^^x2.

u got dem pics?

**Tenpsi** · 10-20-2007, 10:23 AM

if you do the pistons too you will be good for somewhere around 15psi. That should be close to your 350 hp goal.

**crashtke** · 10-20-2007, 01:45 PM

I would go forged...one bad tank of gas with stock pistons could fry em with a little detonation. My wrx has done decent with stock pistons (not forged) but for the engine I am building I am throwing in forged pistons as an added security measure.

**vancem3m3** · 10-20-2007, 03:47 PM

when the tag boosted gsr and you dont know that means then dont post this theads not for you.for those of you that do know thanks for your advice and in
site.and if you really just need a little more info. here it is...

99 acura integra GSR is the car
2000 b18b1 stock block rebuilt .20 over
GSR tranny
2001 itr fully built head all crower internals 1 mm over valves GSR cams.
full 3in. turbo back exaust
t3/t4 turbo .63-a/r .60-a/r and a half tail/greddy wastegate
i bought some rods and was looking for some pistons and some good insite..
for my 350whp goal...

**haynbtu** · 10-20-2007, 04:11 PM

Originally Posted by scttydb411

get forged pistons michael. the stock ones won't last at that goal.

yea i agree wit this person!

**gtikid** · 10-20-2007, 04:32 PM

Originally Posted by vancem3m3

when the tag boosted gsr and you dont know that means then dont post this theads not for you.for those of you that do know thanks for your advice and in
site.and if you really just need a little more info. here it is...

99 acura integra GSR is the car
2000 b18b1 stock block rebuilt .20 over
GSR tranny
2001 itr fully built head all crower internals 1 mm over valves GSR cams.
full 3in. turbo back exaust
t3/t4 turbo .63-a/r .60-a/r and a half tail/greddy wastegate
i bought some rods and was looking for some pistons and some good insite..
for my 350whp goal...

I agree

It's pretty obvious who knows what they're talkin about and who's on this site just for the porn...

**Tenpsi** · 10-21-2007, 10:14 AM

theres porn on this site??

**Gutling** · 10-21-2007, 10:17 AM

all these years i been waisting time reading about cars, when i could have seen boobies

**chituntang** · 10-23-2007, 04:31 AM

Sell everything, get a Supra, NSX, also a lot of choices out there. I know turbo tegs are fast, but get a better car if you wanted that much hp... (unless all you do is going straight)

Thread: I WANT 350 WHP

Thread Tools

Display

I WANT 350 WHP

350

Posting Permissions

About us

Announcement