iam running 20W50 synthetic oil in my 05 636, but motor runs a bit hotter now. about 10-15 degrees. whats the best oil to use?
iam running 20W50 synthetic oil in my 05 636, but motor runs a bit hotter now. about 10-15 degrees. whats the best oil to use?
Everything tastes better on a cracker.
-www.AtlantaStuntJunkies.com-
Full Synthetic AMS Oil IMO
Used in everything I own, lawn mowers, motorcycles, cars, everything that needs oil its what i use, and always have. Expensive, but you get what you pay for.
torcco 10w-40 put it in my buddies rc-51 and he was consistent 10 degree cooler
AMS all the way but I have friends that also like royal purple
everyone likes something different lol
way better things than yamalube.
Use royal purple, i used this after using ****ty yama lube. Shifts better revs faster, feels like a totally different bike.
Is there a website that doesn't have a password?Originally Posted by The BUCKY
The key is not to use something overly slick. Remember that the oil also lubricates your clutch pack. Too slick and you'll start slipping on the clutch too much and prematurely wear them out. If you use something way too thick it also tends to bog the motor down a little until the oil gets hot, the oil passages aren't like huge or anything so keep that in mind too.
Go with the weight the manufacturer recommends in a reputable brand and you'll be just fine.
Originally Posted by sleepys4
thats weird i have never had to use a password till now. wtf
probably lol, but i like it just fine..Originally Posted by The BUCKY
i'd run 10w40 also
(i use mobile 1 mx4t) but any full synthetic will do fine
no reason to run 20w in a 600 4cyl