Ok, here is the deal.
I have a hatch with a d16z6, was running great untill about a week ago.
Car starts up cold with no problems but after you drive it for a while and turn it off it refuses to start. It doesnt want to start because too much fuel is getting into the engine, as you turn the car over you can smell an overwhelming amount of gas. In order to start the car I have to get some one to clamp the fuel line while I turn the car over and once it starts and when it does a whole lot of black smokes pours from the tail pipe.
The only CEL I am getting is a "Water Temperture sensor" I changed the sensor but I am still getting the code.
Some of the things I have changed.
I got a new distributor, changed the fuel pressure regulator, changed the injectors, and changed the thermostat, and checked the spark plugs, and they are not foul they are almost new.
REPS to anyone who can help me figure this out.
thanks.
PS I do not know if this helps but car has no Cat, just a resonator bolted up to the headers and 2.5in piping all the way to the exhuast.