I have a 1st gen strat with the 2.5v6. Same exact motor minus the displacement. I hate the spark plug and wire changes. You have to remove the upper intake manifold just to get to the plugs. The back 2 bolts are an absolute bitch.
I have a 1st gen strat with the 2.5v6. Same exact motor minus the displacement. I hate the spark plug and wire changes. You have to remove the upper intake manifold just to get to the plugs. The back 2 bolts are an absolute bitch.
It took me & Nitro hours upon hours to change my plugs & wires. Those 2 back bolts were an absolute nightmare to reach, remove, and reinstall. The really messed up thing is, 2 weeks later my crank position sensor went out & the upper intake manifold had to be removed again
NOMAD is gay
A 14mm ratcheting wrench FTW. Or was it a 12mm? I forget. I have small hands so I can get into smaller spots with ease.Originally Posted by Nomad!
It took me & Nitro hours upon hours to change my plugs & wires. Those 2 back bolts were an absolute nightmare to reach, remove, and reinstall. The really messed up thing is, 2 weeks later my crank position sensor went out & the upper intake manifold had to be removed again
K series 626. That's right. It's got a K in it.
Posting Permissions
Reply With Quote
