Results 1 to 23 of 23

Thread: Integra problems still NEED HELP BAD!

Hybrid View

  1. 06-30-2007, 10:57 AM #1
    SLow_POke
    SLow_POke is offline
    Senior Member SLow_POke's Avatar
    Join Date
    Jun 2006
    Location
    WEST_SIDE
    Age
    45
    Posts
    1,841
    Rep Power
    21

    Default

    OK brake it down.

    you cleaned youR IAC.

    you checked for vaccum leaks. ( the specialist SHOULD HAVE DONE THAT)

    you checked for brakes in the IAC wiring/specs( AGAIN THE SPECIALIST SHOULD HAVE CHECK THAT).

    you checked your TB and adjusting screw.

    i guess i really does'nt hurt to check you FITV.


    tkae it to VUONG's hes closest to you man .,

    BTW: NEVER GO THAT SPECIALIST EVER AGAIN
    Reply With Quote Reply With Quote
  2. 06-30-2007, 12:05 PM #2
    KREEP
    KREEP is offline
    polar bears toenails
    Join Date
    Jun 2007
    Location
    Kicking rocks
    Age
    45
    Posts
    4,663
    Rep Power
    26

    Default hmmm

    Where is the fast idle control valve on a 2000 acura integra?

    I looked under the tb and there was nothing. I mean I took the tb off and there was no ficv can someone show me a pic or point me in the right direction?
    Reply With Quote Reply With Quote
  3. 06-30-2007, 12:19 PM #3
    KREEP
    KREEP is offline
    polar bears toenails
    Join Date
    Jun 2007
    Location
    Kicking rocks
    Age
    45
    Posts
    4,663
    Rep Power
    26

    Default YEAH

    There is no bronze plate. But there is a thing with two screw looking things but there is no way to take off. ItS BUILT IN ALMOST.
    Reply With Quote Reply With Quote
  4. 06-30-2007, 04:28 PM #4
    KREEP
    KREEP is offline
    polar bears toenails
    Join Date
    Jun 2007
    Location
    Kicking rocks
    Age
    45
    Posts
    4,663
    Rep Power
    26

    Default Help

    HELP ME!!!!!!!!!!!! iM FUCKED
    Reply With Quote Reply With Quote
  5. 06-30-2007, 10:31 PM #5
    allmotoronly
    allmotoronly is offline
    Level IIIa? LOL. allmotoronly's Avatar
    Join Date
    Apr 2006
    Location
    Macon
    Posts
    3,186
    Rep Power
    24

    Default

    Quote Originally Posted by kreep
    There is no bronze plate. But there is a thing with two screw looking things but there is no way to take off. ItS BUILT IN ALMOST.
    well it was bronze once upon a time... its probably corroded. anyway it is round in the middle with two screws holding it on. It will come off. take the screws out and use a flat head to get under it and pry it off.
    Land Rover LR3 HSE
    Reply With Quote Reply With Quote
  6. 07-01-2007, 01:05 AM #6
    KREEP
    KREEP is offline
    polar bears toenails
    Join Date
    Jun 2007
    Location
    Kicking rocks
    Age
    45
    Posts
    4,663
    Rep Power
    26

    Default Im just damn confused

    Quote Originally Posted by allmotoronly
    well it was bronze once upon a time... its probably corroded. anyway it is round in the middle with two screws holding it on. It will come off. take the screws out and use a flat head to get under it and pry it off.
    Dude it's just not there. I took the throttle body off and looked at it for half an hour. There is something that resembles your bronze plate with 2 screws but this has 2 screws with no head. it's like they are rivits or how ever you spell that. There is nothing like you have described on my throttle body. I also went to the local auto zone and the tb gasket that is on my car matches that of a type-r gasket. I am wonderin if someone has upgraded my tb to a type-r tb???????? I asked for a gsr gasket and took it home and it wouldnt fit so I took my gasket up there and its the type-r tb gasket. Does any of this sound weird to you? Can any one show me the difference in the type-r Throttle body and the gsr??? Pics
    Reply With Quote Reply With Quote
« Friends SRT-4 need some help | Turbo S2K project inside (pics) »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!