Results 1 to 32 of 32

Thread: rx8 question

  1. #1
    Senior Member | IA Veteran boostedb16's Avatar
    Join Date
    Jul 2006
    Location
    paint booth
    Age
    50
    Posts
    7,172
    Rep Power
    33

    Default rx8 question

    my friend has a rx8 and if he dont use 93 octain gas and put octain booster on top of that his car will flood it's self out. why does it do that and what would anyone recommend.

  2. #2
    Senior Member | IA Veteran  OneSlow5pt0's Avatar
    Join Date
    Nov 2006
    Location
    Buslengths behind you
    Age
    36
    Posts
    13,406
    Rep Power
    35

    Default

    Rotarys flood,that what they do..when u crank the car it release gas,turn it off to quickly and it floods,then u have to blow it out,and probbly buy new set of $25 spark plugs..i belive thats what happens,my RX-7 flooded couple times..

    if im wrong someone correct me

  3. #3
    Senior Member | IA Veteran boostedb16's Avatar
    Join Date
    Jul 2006
    Location
    paint booth
    Age
    50
    Posts
    7,172
    Rep Power
    33

    Default

    ok but he can pull up to a red light and it will die and he has to wait forever to get it going again. so he will always have this problem or is there something he can do to fix it.

  4. #4
    Senior Member | IA Veteran  OneSlow5pt0's Avatar
    Join Date
    Nov 2006
    Location
    Buslengths behind you
    Age
    36
    Posts
    13,406
    Rep Power
    35

    Default

    Quote Originally Posted by boostedb16
    ok but he can pull up to a red light and it will die and he has to wait forever to get it going again. so he will always have this problem or is there something he can do to fix it.
    mine never did that,only time my car died like that was when i would stop with the A/C on,so i learn to live without A/C....also after i wuld flood it,it would run like shit for little while

  5. #5
    Senior Member | IA Veteran boostedb16's Avatar
    Join Date
    Jul 2006
    Location
    paint booth
    Age
    50
    Posts
    7,172
    Rep Power
    33

    Default

    yea his runs like shit for a few miles, it will puff a little black smoke a couple of times and then it will clear up. but it seems like when he puts octain booster in it, it dont do it.

  6. #6
    drives a beat up 626 blackshine007's Avatar
    Join Date
    Oct 2003
    Location
    On the overpass pissing on traffic
    Age
    44
    Posts
    2,961
    Rep Power
    26

    Default

    Has anyone done the reflash? And is this only happening on the '04 models? If you haven't had it reflashed, you need to do that. It sounds like it's staying stuck partially in open loop mode. Has any of ya'll had the MIL light come on for a P0420 or anything related to the catalyst effeciency?

    K series 626. That's right. It's got a K in it.

  7. #7
    Senior Member | IA Veteran  OneSlow5pt0's Avatar
    Join Date
    Nov 2006
    Location
    Buslengths behind you
    Age
    36
    Posts
    13,406
    Rep Power
    35

    Default

    does it call for 93?

    i ran 87 perfect with no problems with my 7

  8. #8
    drives a beat up 626 blackshine007's Avatar
    Join Date
    Oct 2003
    Location
    On the overpass pissing on traffic
    Age
    44
    Posts
    2,961
    Rep Power
    26

    Default

    Quote Originally Posted by HypnoToad
    does it call for 93?

    i ran 87 perfect with no problems with my 7
    They run only on 91 or better. High compression. IIRC, it's 11.5:1

    K series 626. That's right. It's got a K in it.

  9. #9
    Senior Member | IA Veteran  OneSlow5pt0's Avatar
    Join Date
    Nov 2006
    Location
    Buslengths behind you
    Age
    36
    Posts
    13,406
    Rep Power
    35

    Default

    Quote Originally Posted by blackshine007
    They run only on 91 or better. High compression. IIRC, it's 11.5:1
    all rotaries are High Compression

  10. #10
    Senior Member | IA Veteran boostedb16's Avatar
    Join Date
    Jul 2006
    Location
    paint booth
    Age
    50
    Posts
    7,172
    Rep Power
    33

    Default

    Quote Originally Posted by blackshine007
    Has anyone done the reflash? And is this only happening on the '04 models? If you haven't had it reflashed, you need to do that. It sounds like it's staying stuck partially in open loop mode. Has any of ya'll had the MIL light come on for a P0420 or anything related to the catalyst effeciency?
    where can he have it reflashed?

  11. #11
    drives a beat up 626 blackshine007's Avatar
    Join Date
    Oct 2003
    Location
    On the overpass pissing on traffic
    Age
    44
    Posts
    2,961
    Rep Power
    26

    Default

    Quote Originally Posted by boostedb16
    where can he have it reflashed?
    Unless you know anyone who has a reprogrammer, you'll have to go to the dealer

    K series 626. That's right. It's got a K in it.

  12. #12
    Rutspeed/b00b CreW BTLFED's Avatar
    Join Date
    Nov 2002
    Location
    Belview Insane Asylum
    Age
    48
    Posts
    30,776
    Rep Power
    61

    Default

    Quote Originally Posted by boostedb16
    my friend has a rx8 and if he dont use 93 octain gas and put octain booster on top of that his car will flood it's self out. why does it do that and what would anyone recommend.
    Tell your friend to buy a new car because he obviously doesn't know WTF is going on when it comes to cars.
    --RIP Leisa. Forever In Our Hearts--

    --Val for President 1979-2007--
    --RIP Val, You will be missed--

    Quote Originally Posted by HalfBaked
    Anytime I'm driving south of I-20 in the perimeter, I play spot the white driver.

    Generally I don't count past 10.

  13. #13
    Just another ricer
    Join Date
    Apr 2007
    Location
    Pennsyl-fuckin-tucky ya'll
    Age
    41
    Posts
    1,487
    Rep Power
    20

    Default

    Or take the god damn thing to a dealership and ahve them check it.
    90% of teens say "oh shit" before a wreck. The other 10% are from Pennsylvania, they say " hold my beer and watch this shit."
    EvasiveEF9: Just fill me in...if it's black, I'm all over it...

  14. #14
    Rutspeed/b00b CreW BTLFED's Avatar
    Join Date
    Nov 2002
    Location
    Belview Insane Asylum
    Age
    48
    Posts
    30,776
    Rep Power
    61

    Default

    Quote Originally Posted by blackshine007
    Has anyone done the reflash? And is this only happening on the '04 models? If you haven't had it reflashed, you need to do that. It sounds like it's staying stuck partially in open loop mode. Has any of ya'll had the MIL light come on for a P0420 or anything related to the catalyst effeciency?
    You are wrong, you have no clue what you are talking about, and that is from the 2 certified Mazda techs getting drunk with me right now. The internet is not the gospel.
    --RIP Leisa. Forever In Our Hearts--

    --Val for President 1979-2007--
    --RIP Val, You will be missed--

    Quote Originally Posted by HalfBaked
    Anytime I'm driving south of I-20 in the perimeter, I play spot the white driver.

    Generally I don't count past 10.

  15. #15
    drives a beat up 626 blackshine007's Avatar
    Join Date
    Oct 2003
    Location
    On the overpass pissing on traffic
    Age
    44
    Posts
    2,961
    Rep Power
    26

    Default

    Quote Originally Posted by BTLFED
    You are wrong, you have no clue what you are talking about, and that is from the 2 certified Mazda techs getting drunk with me right now. The internet is not the gospel.
    Ok then, I'm a former Mazda tech as well. But I was there when the first RX8's were coming to the dealer, and I was the one looking at them. So instead of rediculing me, let's come up with some solutions. Hell, why don't you sober up those Mazda techs and get some answers out of them.

    K series 626. That's right. It's got a K in it.

  16. #16
    Cruzan Boy Siverprobegt's Avatar
    Join Date
    Oct 2005
    Location
    ga/VI BREED
    Age
    48
    Posts
    663
    Rep Power
    21

    Default

    Quote Originally Posted by boostedb16
    my friend has a rx8 and if he dont use 93 octain gas and put octain booster on top of that his car will flood it's self out. why does it do that and what would anyone recommend.
    Take it back to the Mazda dealer!!!!!!

    92 mx3

  17. #17
    Senior Member | IA Veteran  OneSlow5pt0's Avatar
    Join Date
    Nov 2006
    Location
    Buslengths behind you
    Age
    36
    Posts
    13,406
    Rep Power
    35

    Default

    fuck that RX-8,ill get me RX-7,and run 87

  18. #18
    Senior Member | IA Veteran boostedb16's Avatar
    Join Date
    Jul 2006
    Location
    paint booth
    Age
    50
    Posts
    7,172
    Rep Power
    33

    Default

    Quote Originally Posted by BTLFED
    Tell your friend to buy a new car because he obviously doesn't know WTF is going on when it comes to cars.
    so you want him to buy a new car because he doesn't know wtf is going on when it come's to cars . but anyway he has taken it to the dealership and they dont know whats up. but i will tell him to take it and try to get it reflashed.

  19. #19
    Rutspeed/b00b CreW BTLFED's Avatar
    Join Date
    Nov 2002
    Location
    Belview Insane Asylum
    Age
    48
    Posts
    30,776
    Rep Power
    61

    Default

    Quote Originally Posted by boostedb16
    so you want him to buy a new car because he doesn't know wtf is going on when it come's to cars . but anyway he has taken it to the dealership and they dont know whats up. but i will tell him to take it and try to get it reflashed.
    FYI from one of the now sober Mazda Techs (you idiots)-The recall that is run on all of the RX8s includes an engine vacuum test, PCM reflash and/or TCM reflash if included, new leading plugs, test and replace the battery and starter if needed. If all else fails, new long block. Between the two techs that are here, they have seen roughly 100 long blocks replaced in the last 6 months, some of them done multiple times on the same car. One of them has replaced 4 of them himself. I could post the 28 page actual recall from Mazda, but it won't fit in one post, and I don't think you deserve to see it.

    So there is your fucking answer you douchemagoos. Buy a new fucking car.
    --RIP Leisa. Forever In Our Hearts--

    --Val for President 1979-2007--
    --RIP Val, You will be missed--

    Quote Originally Posted by HalfBaked
    Anytime I'm driving south of I-20 in the perimeter, I play spot the white driver.

    Generally I don't count past 10.

  20. #20
    drives a beat up 626 blackshine007's Avatar
    Join Date
    Oct 2003
    Location
    On the overpass pissing on traffic
    Age
    44
    Posts
    2,961
    Rep Power
    26

    Default

    Quote Originally Posted by BTLFED
    FYI from one of the now sober Mazda Techs (you idiots)-The recall that is run on all of the RX8s includes an engine vacuum test, PCM reflash and/or TCM reflash if included, new leading plugs, test and replace the battery and starter if needed. If all else fails, new long block. Between the two techs that are here, they have seen roughly 100 long blocks replaced in the last 6 months, some of them done multiple times on the same car. One of them has replaced 4 of them himself. I could post the 28 page actual recall from Mazda, but it won't fit in one post, and I don't think you deserve to see it.

    So there is your fucking answer you douchemagoos. Buy a new fucking car.

    I knew that in some shape, form or fashion that could almost be useful here. Nice info.

    K series 626. That's right. It's got a K in it.

  21. #21
    Senior Member | IA Veteran boostedb16's Avatar
    Join Date
    Jul 2006
    Location
    paint booth
    Age
    50
    Posts
    7,172
    Rep Power
    33

    Default

    Quote Originally Posted by BTLFED
    FYI from one of the now sober Mazda Techs (you idiots)-The recall that is run on all of the RX8s includes an engine vacuum test, PCM reflash and/or TCM reflash if included, new leading plugs, test and replace the battery and starter if needed. If all else fails, new long block. Between the two techs that are here, they have seen roughly 100 long blocks replaced in the last 6 months, some of them done multiple times on the same car. One of them has replaced 4 of them himself. I could post the 28 page actual recall from Mazda, but it won't fit in one post, and I don't think you deserve to see it.

    So there is your fucking answer you douchemagoos. Buy a new fucking car.
    i will tell him all of that and thanks for the FRIENDLY help, a simple reply would have been fine but thanks again.

  22. #22
    Rutspeed/b00b CreW BTLFED's Avatar
    Join Date
    Nov 2002
    Location
    Belview Insane Asylum
    Age
    48
    Posts
    30,776
    Rep Power
    61

    Default

    Quote Originally Posted by blackshine007
    I knew that in some shape, form or fashion that could almost be useful here. Nice info.
    Almost be useful? Last time I checked, that was all the info he needed. Sounds really useful to me.
    --RIP Leisa. Forever In Our Hearts--

    --Val for President 1979-2007--
    --RIP Val, You will be missed--

    Quote Originally Posted by HalfBaked
    Anytime I'm driving south of I-20 in the perimeter, I play spot the white driver.

    Generally I don't count past 10.

  23. #23
    Rutspeed/b00b CreW BTLFED's Avatar
    Join Date
    Nov 2002
    Location
    Belview Insane Asylum
    Age
    48
    Posts
    30,776
    Rep Power
    61

    Default

    Quote Originally Posted by boostedb16
    i will tell him all of that and thanks for the FRIENDLY help, a simple reply would have been fine but thanks again.
    I don't make things simple just because you people are idiots. I'm not dumbing down my posts to satisfy you.
    --RIP Leisa. Forever In Our Hearts--

    --Val for President 1979-2007--
    --RIP Val, You will be missed--

    Quote Originally Posted by HalfBaked
    Anytime I'm driving south of I-20 in the perimeter, I play spot the white driver.

    Generally I don't count past 10.

  24. #24
    Just another ricer
    Join Date
    Apr 2007
    Location
    Pennsyl-fuckin-tucky ya'll
    Age
    41
    Posts
    1,487
    Rep Power
    20

    Default

    Quote Originally Posted by BTLFED
    I don't make things simple just because you people are idiots. I'm not dumbing down my posts to satisfy you.
    All things considered, he asked for TECHNICAL help. Therefore, dumbin down your post would be like saying. "Uhh turn dat screw...den dat one..and maybe it might work someday"
    90% of teens say "oh shit" before a wreck. The other 10% are from Pennsylvania, they say " hold my beer and watch this shit."
    EvasiveEF9: Just fill me in...if it's black, I'm all over it...

  25. #25
    Senior Member | IA Veteran boostedb16's Avatar
    Join Date
    Jul 2006
    Location
    paint booth
    Age
    50
    Posts
    7,172
    Rep Power
    33

    Default

    Quote Originally Posted by BTLFED
    I don't make things simple just because you people are idiots. I'm not dumbing down my posts to satisfy you.
    i was not telling you to dumb anything down, but the all the calling people dumb ass's or idiots because they ask a question is dumb. if i knew why his car was doing that i would not have asked.

  26. #26
    drives a beat up 626 blackshine007's Avatar
    Join Date
    Oct 2003
    Location
    On the overpass pissing on traffic
    Age
    44
    Posts
    2,961
    Rep Power
    26

    Default

    Quote Originally Posted by boostedb16
    i was not telling you to dumb anything down, but the all the calling people dumb ass's or idiots because they ask a question is dumb. if i knew why his car was doing that i would not have asked.
    That's just the slipping of finger. He actually meant good by it, it's just when he either blinked or sneezed, his fingers went on a wild typing spree. By the time he realized that, he had hit enter, thus getting the posts(tses) that lies before us. His fingers has a mind of their own.....

    K series 626. That's right. It's got a K in it.

  27. #27
    Just another ricer
    Join Date
    Apr 2007
    Location
    Pennsyl-fuckin-tucky ya'll
    Age
    41
    Posts
    1,487
    Rep Power
    20

    Default

    Quote Originally Posted by blackshine007
    That's just the slipping of finger. He actually meant good by it, it's just when he either blinked or sneezed, his fingers went on a wild typing spree. By the time he realized that, he had hit enter, thus getting the posts(tses) that lies before us. His fingers has a mind of their own.....
    LOL Idle hands. Btlfed you shoulda been doubling fisting last night to keep from this catastrophe lol.
    90% of teens say "oh shit" before a wreck. The other 10% are from Pennsylvania, they say " hold my beer and watch this shit."
    EvasiveEF9: Just fill me in...if it's black, I'm all over it...

  28. #28
    Slowest Car on IA David88vert's Avatar
    Join Date
    Nov 2002
    Location
    Johns Creek
    Age
    53
    Posts
    8,378
    Rep Power
    37

    Default

    Quote Originally Posted by HypnoToad
    all rotaries are High Compression
    Not true. The only mass-produced facotry rotarys that can be considered high-compression are the Renesis motors.

    Mazda rotarys ranged from 8.5-9.7:1
    FDs were only 9.0:1

  29. #29
    Senior Member | IA Veteran  OneSlow5pt0's Avatar
    Join Date
    Nov 2006
    Location
    Buslengths behind you
    Age
    36
    Posts
    13,406
    Rep Power
    35

    Default

    Quote Originally Posted by David88vert
    Not true. The only mass-produced facotry rotarys that can be considered high-compression are the Renesis motors.

    Mazda rotarys ranged from 8.5-9.7:1
    FDs were only 9.0:1
    i thought thats y u couldnt turbo a 13B N/A was because of the compression,and also blowing the apex seals to hell

  30. #30
    Rutspeed/b00b CreW BTLFED's Avatar
    Join Date
    Nov 2002
    Location
    Belview Insane Asylum
    Age
    48
    Posts
    30,776
    Rep Power
    61

    Default

    Quote Originally Posted by mxglory258
    LOL Idle hands. Btlfed you shoulda been doubling fisting last night to keep from this catastrophe lol.
    I really should have drank more so the tits I saw at the hotel that night would have been more attractive.
    --RIP Leisa. Forever In Our Hearts--

    --Val for President 1979-2007--
    --RIP Val, You will be missed--

    Quote Originally Posted by HalfBaked
    Anytime I'm driving south of I-20 in the perimeter, I play spot the white driver.

    Generally I don't count past 10.

  31. #31
    Slowest Car on IA David88vert's Avatar
    Join Date
    Nov 2002
    Location
    Johns Creek
    Age
    53
    Posts
    8,378
    Rep Power
    37

    Default

    Quote Originally Posted by HypnoToad
    i thought thats y u couldnt turbo a 13B N/A was because of the compression,and also blowing the apex seals to hell
    You can turbo any car with any compression. You just need to run a higher octane fuel, and tune accordingly. You can't run as much psi and have less room for error.

  32. #32
    Rutspeed/b00b CreW BTLFED's Avatar
    Join Date
    Nov 2002
    Location
    Belview Insane Asylum
    Age
    48
    Posts
    30,776
    Rep Power
    61

    Default

    Quote Originally Posted by David88vert
    You can turbo any car with any compression. You just need to run a higher octane fuel, and tune accordingly. You can't run as much psi and have less room for error.
    Translation: Idiots can't use homemadeturbo.com to add forced induction using junkyard garbage parts including a turbo off an SVO Mustang. You gotta pay to play.
    --RIP Leisa. Forever In Our Hearts--

    --Val for President 1979-2007--
    --RIP Val, You will be missed--

    Quote Originally Posted by HalfBaked
    Anytime I'm driving south of I-20 in the perimeter, I play spot the white driver.

    Generally I don't count past 10.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!