Quote Originally Posted by jmmx258
Deffinetely not the spray gun. 1/2 inch impact, D/A sanders need quite a bit of pressure to get them going. Spray guns are all regulator fed.

http://www.harborfreight.com/cpi/cta...emnumber=90234

That'd probably work nicely. Just for home repair and what not.
yeah they spray gun has a regulator on it sometimes. Which you will usually set at 40psi (depending on gun). I know some of mine require around 11cfm at 40psi. Read the manuals on your tools and they will tell you how much cfm is required at a certain psi.