Take off the hub. Put it in a vise. Hit the studs with a BFH (big fucking hammer). Replace with new and again use the BFH to re apply studs.
Take off the hub. Put it in a vise. Hit the studs with a BFH (big fucking hammer). Replace with new and again use the BFH to re apply studs.
Honda RC51 SP1
Yoshi RS-3 Cans
520 Conversion
Clip Ons
Race Tech Fork Kit
You gotta pull the hub, period. Then when you pull the hub you want to replace the bearing...99.999999% of the time if you don't that old bearing will fail in a week or less then you'll have to do it all over again.
Link to DIY tech:
http://www.honda-tech.com/zerothread?id=907985&page=1
Pics after i did mine, but i didn't do it for looks
Posting Permissions
Reply With Quote
