Newnan meets

[JEY$JDM]

Yeah, I like to fuck b4 the meets as well... hahahahaha

[pixyspoxey]

It's gonna be real close if I can make it to this Fridays meet. I just went to hook up my new spindles to the Tie rod ends and realized my damn inner tie rods are too short and I need to get the SN95 length ones and not the Fox Body length ones. Oh well whats another $50? All I have left is re-wire the alternator and Starter, Fill the trans, Inner and outer tie rods/ends, alignment, reinstall the fuel tank and move the sway bar lower mounts. Hopefully the shitbox will be on the road Friday afternoon and I can get it to Bryan's for the meet.

[homemadeS14s]

Everyone that are going to TunerFest on this Saturday ..... check out this thread!!!!


Tunerfest Shootout Newnan Roll out!!!


see yall there mofo's!!!

[HypnoToad]

It's gonna be real close if I can make it to this Fridays meet. I just went to hook up my new spindles to the Tie rod ends and realized my damn inner tie rods are too short and I need to get the SN95 length ones and not the Fox Body length ones. Oh well whats another $50? All I have left is re-wire the alternator and Starter, Fill the trans, Inner and outer tie rods/ends, alignment, reinstall the fuel tank and move the sway bar lower mounts. Hopefully the shitbox will be on the road Friday afternoon and I can get it to Bryan's for the meet.

hey home skillet...u .got a 302 block laying around

[h23bb2]

^^^ you gonna do what if think your gonna do?????!!!!

[HypnoToad]

^^^ you gonna do what if think your gonna do?????!!!!

whats that?

[pixyspoxey]

hey home skillet...u .got a 302 block laying around

Nope, but you can get one at the pull-a-part in conley for next to nothing. I had an extra 351W long block but I gave it to a buddy of mine a little while ago.

If you need any help putting one together when you do it let me know.

[HypnoToad]

Nope, but you can get one at the pull-a-part in conley for next to nothing. I had an extra 351W long block but I gave it to a buddy of mine a little while ago.

If you need any help putting one together when you do it let me know.

o,ok cool mans.....

im not sure bout this yet,but kinda looking at options

im a chevy man through and through,but might try the 302/T5 stuff

[smoknlegend]

Harrison and I can meet you at Daniels before the meet. Just give me a ring to remind me.

awesome ill give you guys a call

Anyone else wanna come?

[JEY$JDM]

So Dteng is going to Dallas with us Saturday?

[roxie911]

Yeah, I like to fuck b4 the meets as well... hahahahaha

LOL Who said anything about fucking?? There's this cool thing called cuddling...you should try it sometime

[JEY$JDM]

I LOVE cuddling... after I fuck! hahahahaha forreal

[Homer Simpson]

DTENG! Ya car IS presentable *****! Just ride out to the meet with me and my cuz in our hatches bro!

I should deff be out this Friday too... anyone down for a tunerfest after party at my house in Senoia??????

Sounds like a plan!

Joe, I'll see if I can make it.

[JEY$JDM]

Hell yes.. So ya gunna be at the tunerfest? You gunna ride out with the gang @ Save Rite?

[JEY$JDM]

Oh Dave, when you getting the AP1 rear bumper bro?

[Ricer]

Oh Dave, when you getting the AP1 rear bumper bro?

...yousir... are a post whore.. haha

[pixyspoxey]

o,ok cool mans.....

im not sure bout this yet,but kinda looking at options

im a chevy man through and through,but might try the 302/T5 stuff

The 302 and T5 are an excellent combo and be put together for next to nothing. Plus the aftermarket support is through the roof.

[Homer Simpson]

Oh Dave, when you getting the AP1 rear bumper bro?

Soon man, dteng never dissapoints.

But, first thing is first. Car needs to be slammed.

And slammed it will be next week.

Stay tuned.

Btw, anybody know's a more local place to get my rear fenders rolled? Alex suggested Lethal Injection, but I want something a little closer. Need to get it rolled asap.

[pixyspoxey]

Btw, anybody know's a more local place to get my rear fenders rolled? Alex suggested Lethal Injection, but I want something a little closer. Need to get it rolled asap.

Most reputable body shops will do it.

[Homer Simpson]

Most reputable body shops will do it.

You think Southern Customs would?

[HypnoToad]

The 302 and T5 are an excellent combo and be put together for next to nothing. Plus the aftermarket support is through the roof.

well im gonna be doing a carbed 302,built with stock parts...with a 600 carb and air gap intake.

i always liked 302 motors,just not the cars they came in

[pixyspoxey]

well im gonna be doing a carbed 302,built with stock parts...with a 600 carb and air gap intake.

i always liked 302 motors,just not the cars they came in

Any reason why you don't want to go EFI? Look up EFI Swaps on google. It's extremely easy.

[HypnoToad]

Any reason why you don't want to go EFI? Look up EFI Swaps on google. It's extremely easy.

idk,just wanna keep it as simple as i can.

reason im going with 302 over 350,because of the size and the dizzy on the front of the ford is very good thing.

[pixyspoxey]

idk,just wanna keep it as simple as i can.

reason im going with 302 over 350,because of the size and the dizzy on the front of the ford is very good thing.

IMO I would stay with EFI if your planning on keeping it stock. Driveability is a huge thing and trying to dial in a carb and keep it there can be a PITA. I have to get mine Dynoed whenever I decide to get the A/F Mix checked. With the EFI you can plug in with a cheap ass laptop and change everything if you buy the correct program ---> Tweecer. Which I planon doing for my next "Mod". I will be dumping the Carb setup and going EFI just for tunability and driveability.

You can get a 5.0L out of the pull-a-part for $190 with everything from pan to intake and all of the sensors and harnesses. If you forego the warranty (which is if its bad you pull another) its $170.

[tnomud]

Soon man, dteng never dissapoints.

But, first thing is first. Car needs to be slammed.

And slammed it will be next week.

Stay tuned.

Btw, anybody know's a more local place to get my rear fenders rolled? Alex suggested Lethal Injection, but I want something a little closer. Need to get it rolled asap.

I have a good track record of doing it.

Allspeed has a roller

[r0bb86]

ZEN Motors isn't local but they have rolled quite a few evo ix's, evo x's and sti's fenders in the last couple of weeks. Top notch work.

[Homer Simpson]

Yikes!

I called Southern Customs and they had no clue what I was talking about. Then called Allspeed, and they said they don't offer body work.

Looked up ZEN, its a 70 mile drive one way

[MeFryRice]

That's weird. I thought Allspeed used to do it?

[Homer Simpson]

That's weird. I thought Allspeed used to do it?

Nah, they told me to call "peachtree paint and body"

I called, and they said to call back at 1 when the owner comes back or seomthing.

I looked on CL and that guy has no contact info whatsoever or maybe i'm blind.

[tnomud]

Nah, they told me to call "peachtree paint and body"

I called, and they said to call back at 1 when the owner comes back or seomthing.

I looked on CL and that guy has no contact info whatsoever or maybe i'm blind.

[tnomud]

Bring it by my house with a bag of chicken tacos and a rain coat, we'll get-r-done

[HypnoToad]

IMO I would stay with EFI if your planning on keeping it stock. Driveability is a huge thing and trying to dial in a carb and keep it there can be a PITA. I have to get mine Dynoed whenever I decide to get the A/F Mix checked. With the EFI you can plug in with a cheap ass laptop and change everything if you buy the correct program ---> Tweecer. Which I planon doing for my next "Mod". I will be dumping the Carb setup and going EFI just for tunability and driveability.

You can get a 5.0L out of the pull-a-part for $190 with everything from pan to intake and all of the sensors and harnesses. If you forego the warranty (which is if its bad you pull another) its $170.

yea man,i get what your saying,i just know lot more bout carbs and such...and since this will be a custom job,any thing that is familer is nice...lol

u know where a pull apart is,and gonna need a good T5 too.
but deff thanks for the help.

[JEY$JDM]

...yousir... are a post whore.. haha

YEAH BUDDY!!!!

[JEY$JDM]

Reps given to all Newnan ppl... I think I got all ya anyways...???

[BluesClues]

I almost thought you got lost somewhere on the internet or something lol. don't c much of your post anymore. I did c the lexus at the meet last time. The last time i saw you was at riverdale meet.lol..good to c u back in the hobby.

Yeah I am making a comeback. Don't post much anymore because IA just isn't what it used to be.

I came out there friday and I was a little dissapointed. I don't like the fact that it is a little segregated. I wanted to go up and just say hi to everyone, but I didn't want to intrude and I felt akward. I am not used to it being that way at meets. I might come back out tomorrow, but since I have to get up so early for tunerfest on sat. more than likely I won't.

[BluesClues]

Reps given to all Newnan ppl... I think I got all ya anyways...???

Did you hit me up as well?

[pixyspoxey]

yea man,i get what your saying,i just know lot more bout carbs and such...and since this will be a custom job,any thing that is familer is nice...lol

u know where a pull apart is,and gonna need a good T5 too.
but deff thanks for the help.

There is a couple around. www.pullapart.com and I believe there is one in fairburn on Hwy 29.

As for the T-5 it is possible to use a 4 cyl trans but If you can find a V8 T5 youd be better off.

[bbuba]

you didnt hit me up dog

[JEY$JDM]

^ I catch ya later... too much rep given within 24 hrs

[JEY$JDM]

Fuck. I cant wait till Saturday!!!!!!