BNIB Onkyo TX-SR605

[drpepper14]

I purchased this directly from Onkyo 3 months ago and never got around to using it. It's only been taken out of the box and placed in spare bedroom and powered up once to make sure it was operational.

This unit is not a refurb from onkyo, it was purchased brand new from onkyo directly and comes with remote, setup/tuning mic, and all manuals/accessories.

$350 + shipping

Specs on the unit
Amplifier Section

Power Output - Front L/R 90 W + 90 W (8 ohms, 20 Hz–20 kHz,
0.08%, 2 channels driven, FTC)
105 W + 105 W (8 ohms, 1 kHz, 0.7%,
2 channels driven, FTC)
110 W + 110 W (6 ohms, 1 kHz, 0.1%,
2 channels driven, FTC) Center 90 W (8 ohms, 20 Hz–20 kHz, 0.08%,
2 channels driven, FTC)
105 W (8 ohms, 1 kHz, 0.7%, 2 channels
driven, FTC)
110 W (6 ohms, 1 kHz, 0.1%, 2 channels
driven, FTC) Surround L/R 90 W + 90 W (8 ohms, 20 Hz–20 kHz,
0.08%, 2 channels driven, FTC)
105 W + 105 W (8 ohms, 1 kHz, 0.7%,
2 channels driven, FTC)
110 W + 110 W (6 ohms, 1 kHz, 0.1%,
2 channels driven, FTC) Surround Back L/R 90 W + 90 W (8 ohms, 20 Hz–20 kHz,
0.08%, 2 channels driven, FTC)
105 W + 105 W (8 ohms, 1 kHz, 0.7%,
2 channels driven, FTC)
110 W + 110 W (6 ohms, 1 kHz, 0.1%,
2 channels driven, FTC) Dynamic Power 210 W (3 ohms, 1 ch)
180 W (4 ohms, 1 ch)
110 W (8 ohms, 1 ch) THD (Total Harmonic Distortion) 0.08% (Rated power) Damping Factor 60 (Front, 1 kHz, 8 ohms) Input Sensitivity and Impedance 200 mV/47 k-ohms (Line) Output Level and Impedance 200 mV/470 ohms (Rec out) Phono Overload - Frequency Response 5 Hz–100 kHz/+1 dB, -3 dB (Direct mode) Tone Control ±10 dB, 50 Hz (Bass)
±10 dB, 20 kHz (Treble) Signal-to-Noise Ratio 100 dB (Line, IHF-A) Speaker Impedance 6 ohms–16 ohms
Video Section

Input Sensitivity/Output Level and Impedance - Video 1 Vp-p/75 ohms (Component and S-Video Y)
0.7 Vp-p/75 ohms (Component PB/CB, PR/CR)
0.28 Vp-p/75 ohms (S-Video C)
1 Vp-p/75 ohms (Composite) Component Video Frequency Response 5 Hz–50 MHz
Tuner Section

Tuning Frequency Range - FM 87.5 MHz–107.9 MHz AM 530 kHz–1,710 kHz FM/AM Preset Memory 40 stations
General

Power Supply AC 120 V, 60 Hz Power Consumption 6.5 A Dimensions (W x H x D) 17 1/8" x 6 7/8" x 14 13/16"
(435 x 174 x 377 mm) Weight 25.1 lbs. (11.4 kg)
Product Features


Amplifier

# Channels 7 Power (8ohms 20-20kHz 0.08%) /Ch 90W Power (8ohms 20-20kHz 0.05%) /Ch - Power (8ohms 1kHz 0.7%) /Ch - THX Certified - Continuous 6ohms Rated Certified 4ohms performance - High Instantaneous Current Capability 36A Amplifier Frequency Response 5Hz-100kHz S/N Ratio (LINE IN) 106dB All Discrete Circuitry Absolute Ground Plate Dual PUSH-PULL Design - Independent Block Construction (Amp/Preprocessor) - Toroidal Transformer - Independent Power Supply - Optimum Gain Volume Linear Optimum Gain Volume - Non-Scaling Configuration Bi-amp Capability For Front BTL Capability For Front -
Processing

DOLBY Decoder DD Plus, TrueHD DTS Decoder DTS-HD Master Audio Neural Surround THX Processing Mode - DSD Processing/Direct Mode - / - Direct/Pure Mode / - Music Optimizer - Audyssey Dynamic EQ - 192K/24 Bit DACs VLSC - DSP Type / QTY 32 BIT Adjustable Crossover 40/50/60/80/100/120/150/200Hz Independent Crossover (LR, C, SR, SB) AV Sync Accurate Speaker Distance Setting Multi-Band Speaker EQ 5 Band
Connectivity

Audio I/O 7 / 2 Balanced Audio Output - Balanced Audio Input - Phono Input - Digital Audio IN (OPT/COAX) 3 / 2 Digital Audio OUT (OPT/COAX) - Composite I/O 5 / 1 S-Video I/O 5 / 1 Front-Panel A/V L / R / V / S Front-Panel Optical Component Video / Bandwidth 3 / 1 / 50MHz HDMI I/O 2 / 1 HDMI Version V1.3 Repeater HDMI Bandwidth 1080p HDMI Deep Color Capable (36bit) Component Video Upconversion Analog to HDMI Upconversion 480i to 480p Processing (DCDi) 1080i Upscaling - 1080p Upscaling - Multi-Channel Input 7.1 Surround Pre-Outs SUB Speaker A/+B - Powered Zone2 Zone 2 Line Out Zone 2 Video Out - Zone 3 Line Out - iPod Ready (DS-A2x, DS-A2, DS-A1) Built-in HD Radio Tuner - XM Radio Ready SIRIUS Radio Ready
Integration Access

RS-232 - IR Input - Ethernet - ONKYO-RI System Control 12V Trigger -
Miscellaneous

Pre-Pro/Learning Remote / - Back-Lit Remote - Glossy Black finished Remote - Simple Remote to change input & mode - Color-Coded Speaker Terminals Auto Speaker Calibration W/Mic. (Audyssey 2EQ) OSD Out Input Name Edit - Permanent Memory Storage Solid Aluminum Front Detachable AC Cord - Warranty 2 YEARS