Results 1 to 29 of 29

Thread: I'm beginning to believe someone out there hates me....

  1. #1
    Certified Gearhead KlassAct_EJ6's Avatar
    Join Date
    Sep 2007
    Location
    Cincinnati
    Age
    41
    Posts
    193
    Rep Power
    19

    Angry I'm beginning to believe someone out there hates me....

    Okay, so I get my hub assembly repaired last week at a Firestone service shop and that set me back about $360. I thought I was all done with my car for the time being. Well after a day or two I begin to notice a whining sound coming from the front and I take it back to the shop to see what it was. Sure enough my CV joint on the passenger side is going out. So I told the guy to just find anything on my car that's messed up and I got back a major list of other problems that I'm not going to list because it's two pages and I don't have that kind of time. If anyone knows someone who knows their way around a civic or any good shops around Atlanta that has reasonable labor fees someone let me know. If this **** keeps happening I might just try to sell it after I pay it off in December.

  2. #2
    Senior Member | IA Veteran GSRtegŪ's Avatar
    Join Date
    Nov 2005
    Posts
    17,327
    Rep Power
    46

    Default

    Damn bro 2 pages... I think there trying to rip you off. Post pictures of your car.

  3. #3
    Locost Enthusiast Andy_013's Avatar
    Join Date
    Jul 2007
    Location
    1/2way between Atlanta and Athens
    Age
    38
    Posts
    2,923
    Rep Power
    23

    Default

    why 2 post of the same thing?
    Last edited by Andy_013; 10-16-2007 at 04:51 PM.

  4. #4
    Murdy korilee13's Avatar
    Join Date
    Sep 2007
    Location
    El Paso,TX/ ATL @ Heart
    Age
    36
    Posts
    483
    Rep Power
    19

    Default

    Quote Originally Posted by KlassAct_EJ6
    Okay, so I get my hub assembly repaired last week at a Firestone service shop and that set me back about $360. I thought I was all done with my car for the time being. Well after a day or two I begin to notice a whining sound coming from the front and I take it back to the shop to see what it was. Sure enough my CV joint on the passenger side is going out. So I told the guy to just find anything on my car that's messed up and I got back a major list of other problems that I'm not going to list because it's two pages and I don't have that kind of time. If anyone knows someone who knows their way around a civic or any good shops around Atlanta that has reasonable labor fees someone let me know. If this **** keeps happening I might just try to sell it after I pay it off in December.
    your best bet is to list all the stuff out, cause i know atleast with my group of friends or w/e different people have there things that they are good at fixing.

  5. #5
    Certified Gearhead KlassAct_EJ6's Avatar
    Join Date
    Sep 2007
    Location
    Cincinnati
    Age
    41
    Posts
    193
    Rep Power
    19

    Default

    I didn't mean to post two, my bad. But I have the list here and this is what they gave me. And the crappy thing about all this is that I got my car checked out at a Tires Plus before I moved to Atlanta and they never mentioned any of this stuff, and that was back in August so it hasn't been that long. So I don't understand how all this just all of a sudden needed replacing.


    Battery Holddown-$20.40

    Brake System Flush-Fluid-$17.99
    Brake System Flush-Labor-$42.00

    CV Complete Assembly-$136.65
    Remove & Inspect Axle Shaft Assembly-$110.50

    Battery Corrosion Protection Package-$12.99

    Lower Radiator Hose-$22.23
    Upper Radiator Hose-$15.87
    Remove & Replace Radiator Hose, Both-$85.00

    Radiator System Flush w/ New Antifreeze-$79.99

    New belts w/ Labor-$133.47

    Transmission Fluid-$30.00
    Trans. Cleaner and Conditioning-Labor-$60.00
    Ever-Wear Power Trans. Flush & Treatment-$19.99

    Tune Up Service (new spark plugs, ignition wires, & labor)-$199.95

    Water Pump-$55.00
    Remove & Replace Water Pump-$246.50
    Timing Belt-$44.99

    Total w/ the engine diagnostic service and after taxes-$1,528.48

  6. #6
    IA Official Groover puregroove's Avatar
    Join Date
    Mar 2005
    Location
    Georgia
    Age
    44
    Posts
    5,189
    Rep Power
    31

    Default

    wow, man. The reason why they mentioned all this stuff, is probably because of the car's regular maintenance cycle. --that and they want your money.

    More than half of that stuff--you can do yourself with a service manual if you're handy with the tools.

    The timing belt can be tricky at times. Impact gun FTW...

  7. #7
    Back in the EJ1 Grimm Reeper's Avatar
    Join Date
    Jun 2006
    Location
    Southside
    Posts
    9,679
    Rep Power
    34

    Default

    Yea, it looks like they're try'n to rape you like a female with no knowledge of what she drives *uhh you put water in there, right!!!*


    Paintless Dent Removal Technician
    Condemnant quod non intellegunt

  8. #8
    Back in the EJ1 Grimm Reeper's Avatar
    Join Date
    Jun 2006
    Location
    Southside
    Posts
    9,679
    Rep Power
    34

    Default

    I could help you get most of the parts OEM ofcourse for what Honda-Tech pays, cause most aftermarket stuff like what they might use, may not hold up to as long as you may want it to.


    Paintless Dent Removal Technician
    Condemnant quod non intellegunt

  9. #9
    Certified Gearhead KlassAct_EJ6's Avatar
    Join Date
    Sep 2007
    Location
    Cincinnati
    Age
    41
    Posts
    193
    Rep Power
    19

    Default

    Thanks for all the imput guys I was not trying to do business with that shop after I saw that price. JDM_EK4 I'm willing to get all the help I can get. For now, however, I'm pretty much at a standstill becuase I'm still looking for a job and I'm broke as hell right now. I spent the last of my extra money on getting that hub assembly repaired and paying off a deposit for Georgia Power.

  10. #10
    95 Ecllipse GST
    Join Date
    Jul 2006
    Location
    clarkesville,ga
    Age
    37
    Posts
    1,361
    Rep Power
    22

    Default

    Alright all the usuals that hangout lets get 2gether and help this guy out some..And beers are still on Eddie lol..
    1999 MITSUBISHI ECLIPSE GSX
    WORLDS FASTEST MODIFIED 4 CYLINDER
    OWNER: BRENT RAU
    4G63 YUP
    1400 HP
    2200 LBS
    11,000 RPM
    86 PSI OF BOOST
    MAGNUS MOTORSPORTS

    THAT IS 350 HP PER CYLINDER
    AND YES ITS A MITSUBISHI ECLIPSE
    1/4 MILE IN 6.97 SECONDS

    BRENT RAU'S MESSAGE TO OTHER DSM'RS:
    NEVER GIVE UP

  11. #11
    Back in the EJ1 Grimm Reeper's Avatar
    Join Date
    Jun 2006
    Location
    Southside
    Posts
    9,679
    Rep Power
    34

    Default

    yea I saw Eddie lurking around in here Good call Elmer


    Paintless Dent Removal Technician
    Condemnant quod non intellegunt

  12. #12
    Back in the EJ1 Grimm Reeper's Avatar
    Join Date
    Jun 2006
    Location
    Southside
    Posts
    9,679
    Rep Power
    34

    Default

    Quote Originally Posted by KlassAct_EJ6
    Thanks for all the imput guys I was not trying to do business with that shop after I saw that price. JDM_EK4 I'm willing to get all the help I can get. For now, however, I'm pretty much at a standstill becuase I'm still looking for a job and I'm broke as hell right now. I spent the last of my extra money on getting that hub assembly repaired and paying off a deposit for Georgia Power.
    No prob man, I should still be on here whenever you get yourself back on your feet, just drop me a line.


    Paintless Dent Removal Technician
    Condemnant quod non intellegunt

  13. #13
    95 Ecllipse GST
    Join Date
    Jul 2006
    Location
    clarkesville,ga
    Age
    37
    Posts
    1,361
    Rep Power
    22

    Default

    Quote Originally Posted by JDM_EK4
    yea I saw Eddie lurking around in here Good call Elmer
    Thats right man i never forget when someone invites 2 some drinks..
    1999 MITSUBISHI ECLIPSE GSX
    WORLDS FASTEST MODIFIED 4 CYLINDER
    OWNER: BRENT RAU
    4G63 YUP
    1400 HP
    2200 LBS
    11,000 RPM
    86 PSI OF BOOST
    MAGNUS MOTORSPORTS

    THAT IS 350 HP PER CYLINDER
    AND YES ITS A MITSUBISHI ECLIPSE
    1/4 MILE IN 6.97 SECONDS

    BRENT RAU'S MESSAGE TO OTHER DSM'RS:
    NEVER GIVE UP

  14. #14
    slob on my NOOB cactusEG's Avatar
    Join Date
    Jul 2005
    Location
    San antonio 210
    Posts
    20,538
    Rep Power
    41

    Default

    Quote Originally Posted by KlassAct_EJ6
    I didn't mean to post two, my bad. But I have the list here and this is what they gave me. And the crappy thing about all this is that I got my car checked out at a Tires Plus before I moved to Atlanta and they never mentioned any of this stuff, and that was back in August so it hasn't been that long. So I don't understand how all this just all of a sudden needed replacing.


    Battery Holddown-$20.40

    Brake System Flush-Fluid-$17.99
    Brake System Flush-Labor-$42.00

    CV Complete Assembly-$136.65
    Remove & Inspect Axle Shaft Assembly-$110.50

    Battery Corrosion Protection Package-$12.99

    Lower Radiator Hose-$22.23
    Upper Radiator Hose-$15.87
    Remove & Replace Radiator Hose, Both-$85.00

    Radiator System Flush w/ New Antifreeze-$79.99

    New belts w/ Labor-$133.47

    Transmission Fluid-$30.00
    Trans. Cleaner and Conditioning-Labor-$60.00
    Ever-Wear Power Trans. Flush & Treatment-$19.99

    Tune Up Service (new spark plugs, ignition wires, & labor)-$199.95

    Water Pump-$55.00
    Remove & Replace Water Pump-$246.50
    Timing Belt-$44.99

    Total w/ the engine diagnostic service and after taxes-$1,528.48
    dude no fuccing lie. they tried to rip u off bad, most of that stuff u could do ur self on a week end. if u need any help im down to help and if i know the squad well, i bet there down to help

  15. #15
    IA Official Groover puregroove's Avatar
    Join Date
    Mar 2005
    Location
    Georgia
    Age
    44
    Posts
    5,189
    Rep Power
    31

    Default

    Quote Originally Posted by dcshoeco
    Alright all the usuals that hangout lets get 2gether and help this guy out some..And beers are still on Eddie lol..
    I said cokes, man ... cokes::

  16. #16
    Certified Gearhead KlassAct_EJ6's Avatar
    Join Date
    Sep 2007
    Location
    Cincinnati
    Age
    41
    Posts
    193
    Rep Power
    19

    Default

    I appreciate it. I put in a lot of applications this week so hopefully I'll be employed by the end of the month or the beginning of next month so it won't be too long. But I'm ready to get my hands dirty and learn a thing or two.

  17. #17
    Rutspeed/b00b CreW BTLFED's Avatar
    Join Date
    Nov 2002
    Location
    Belview Insane Asylum
    Age
    48
    Posts
    30,776
    Rep Power
    61

    Default

    Quote Originally Posted by KlassAct_EJ6
    Okay, so I get my hub assembly repaired last week at a Firestone service shop
    That's where you ****ed up.
    --RIP Leisa. Forever In Our Hearts--

    --Val for President 1979-2007--
    --RIP Val, You will be missed--

    Quote Originally Posted by HalfBaked
    Anytime I'm driving south of I-20 in the perimeter, I play spot the white driver.

    Generally I don't count past 10.

  18. #18
    Certified Gearhead KlassAct_EJ6's Avatar
    Join Date
    Sep 2007
    Location
    Cincinnati
    Age
    41
    Posts
    193
    Rep Power
    19

    Default

    Quote Originally Posted by BTLFED
    That's where you ****ed up.
    I guess I had that one coming. I should have done my homework before just going to just anybody.

  19. #19
    Rutspeed/b00b CreW BTLFED's Avatar
    Join Date
    Nov 2002
    Location
    Belview Insane Asylum
    Age
    48
    Posts
    30,776
    Rep Power
    61

    Default

    Yeah. I have taken my CRX (EF FTW ) to a Firestone once YEARS ago and they ****ed up one of my studs and lugnuts. It took me hours to get it off. Never again.
    --RIP Leisa. Forever In Our Hearts--

    --Val for President 1979-2007--
    --RIP Val, You will be missed--

    Quote Originally Posted by HalfBaked
    Anytime I'm driving south of I-20 in the perimeter, I play spot the white driver.

    Generally I don't count past 10.

  20. #20
    slob on my NOOB cactusEG's Avatar
    Join Date
    Jul 2005
    Location
    San antonio 210
    Posts
    20,538
    Rep Power
    41

    Default

    Quote Originally Posted by BTLFED
    Yeah. I have taken my CRX (EF FTW ) to a Firestone once YEARS ago and they ****ed up one of my studs and lugnuts. It took me hours to get it off. Never again.
    dude i thought u worked at a shop ?? EG-EJ FTMFW

  21. #21
    95 Ecllipse GST
    Join Date
    Jul 2006
    Location
    clarkesville,ga
    Age
    37
    Posts
    1,361
    Rep Power
    22

    Default

    Quote Originally Posted by puregroove
    I said cokes, man ... cokes::
    Really i thought you said beers??
    1999 MITSUBISHI ECLIPSE GSX
    WORLDS FASTEST MODIFIED 4 CYLINDER
    OWNER: BRENT RAU
    4G63 YUP
    1400 HP
    2200 LBS
    11,000 RPM
    86 PSI OF BOOST
    MAGNUS MOTORSPORTS

    THAT IS 350 HP PER CYLINDER
    AND YES ITS A MITSUBISHI ECLIPSE
    1/4 MILE IN 6.97 SECONDS

    BRENT RAU'S MESSAGE TO OTHER DSM'RS:
    NEVER GIVE UP

  22. #22
    Rutspeed/b00b CreW BTLFED's Avatar
    Join Date
    Nov 2002
    Location
    Belview Insane Asylum
    Age
    48
    Posts
    30,776
    Rep Power
    61

    Default

    Pay attention to the part in bold:

    Quote Originally Posted by BTLFED
    Yeah. I have taken my CRX (EF FTW ) to a Firestone once YEARS ago and they ****ed up one of my studs and lugnuts. It took me hours to get it off. Never again.
    I didn't always work in the performance industry. Only since 98-99. I have been doing import performance since 96, but I haven't always had the shop luxury. This was not long after I bought my car in 96-97.
    --RIP Leisa. Forever In Our Hearts--

    --Val for President 1979-2007--
    --RIP Val, You will be missed--

    Quote Originally Posted by HalfBaked
    Anytime I'm driving south of I-20 in the perimeter, I play spot the white driver.

    Generally I don't count past 10.

  23. #23
    Senior Member | IA Veteran GSRtegŪ's Avatar
    Join Date
    Nov 2005
    Posts
    17,327
    Rep Power
    46

    Default

    I have alwase learned to do work on my own car's! I don't like no one touching my **** except me and my father.

  24. #24
    Certified Gearhead KlassAct_EJ6's Avatar
    Join Date
    Sep 2007
    Location
    Cincinnati
    Age
    41
    Posts
    193
    Rep Power
    19

    Default

    I'm gonna try to do learn how to do things on my own. But I've posted a current pic of my car at the bottom
    Attached Thumbnails Attached Thumbnails -photo-0007-jpg  

  25. #25
    Senior Member | IA Veteran GSRtegŪ's Avatar
    Join Date
    Nov 2005
    Posts
    17,327
    Rep Power
    46

    Default

    Quote Originally Posted by KlassAct_EJ6
    I'm gonna try to do learn how to do things on my own. But I've posted a current pic of my car at the bottom
    Oh, I remember now... is it a EX?

  26. #26
    Certified Gearhead KlassAct_EJ6's Avatar
    Join Date
    Sep 2007
    Location
    Cincinnati
    Age
    41
    Posts
    193
    Rep Power
    19

    Default

    Quote Originally Posted by GSRtegŪ
    Oh, I remember now... is it a EX?
    No it's just a plain ol' LX.

  27. #27
    slob on my NOOB cactusEG's Avatar
    Join Date
    Jul 2005
    Location
    San antonio 210
    Posts
    20,538
    Rep Power
    41

    Default

    Quote Originally Posted by KlassAct_EJ6
    No it's just a plain ol' LX.
    dang JR get ur chet right lol jk


    Quote Originally Posted by BTLFED
    Pay attention to the part in bold:



    I didn't always work in the performance industry. Only since 98-99. I have been doing import performance since 96, but I haven't always had the shop luxury. This was not long after I bought my car in 96-97.
    ok now i got my facts right.. hows the rex doing ?

  28. #28
    Rutspeed/b00b CreW BTLFED's Avatar
    Join Date
    Nov 2002
    Location
    Belview Insane Asylum
    Age
    48
    Posts
    30,776
    Rep Power
    61

    Default

    Quote Originally Posted by cactusEG
    ok now i got my facts right.. hows the rex doing ?
    It's fine...in hibernation in my garage lol!

    I need to find the time to get it back out.
    --RIP Leisa. Forever In Our Hearts--

    --Val for President 1979-2007--
    --RIP Val, You will be missed--

    Quote Originally Posted by HalfBaked
    Anytime I'm driving south of I-20 in the perimeter, I play spot the white driver.

    Generally I don't count past 10.

  29. #29
    slob on my NOOB cactusEG's Avatar
    Join Date
    Jul 2005
    Location
    San antonio 210
    Posts
    20,538
    Rep Power
    41

    Default

    Quote Originally Posted by BTLFED
    It's fine...in hibernation in my garage lol!

    I need to find the time to get it back out.
    at ur house ??

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!