ATTEN: EJ-EG drivers check in! ! ! NWS

Printable View

Show 100 post(s) from this thread on one page

10-14-2007, 03:26 PM
cactusEG

can any one help this person?

http://www.importatlanta.com/forums/...d.php?t=142606
10-14-2007, 05:17 PM
Grimm Reeper

I just a few steps away from being HAPPY :yes:
10-14-2007, 05:19 PM
Grimm Reeper

Quote:

Originally Posted by puregroove

clean that bay!! :goodjob:

I haven't pulled the EJ1 yet cause I'm still waiting on a few things, but I'll make sure to get like 2-3 cans of brake cleaner to do the job:goodjob:
10-14-2007, 10:15 PM
GSRteg®

Ok I'm out for the night hold it down.
10-14-2007, 10:16 PM
GSRteg®

BTW the valve cover looks fresh!!!!!!!!!!!! :bump:
10-14-2007, 10:22 PM
Grimm Reeper

Later JR
10-15-2007, 07:11 AM
cactusEG

PICS of the valve cover! ! !
10-15-2007, 02:53 PM
Grimm Reeper

Yo!!!!
10-15-2007, 05:00 PM
TheChosenOne

I'm proud to say that my 600th post is one informing my EG-EJ brothers that I am keeping my hatch!
I can't wait to brake the motor in a see what it can do with a nice tune
10-15-2007, 05:12 PM
Grimm Reeper

Quote:

Originally Posted by TheChosenOne

I'm proud to say that my 600th post is one informing my EG-EJ brothers that I am keeping my hatch!
I can't wait to brake the motor in a see what it can do with a nice tune

Cool, what motor you have and mods?
10-15-2007, 05:39 PM
cactusEG

Quote:

Originally Posted by TheChosenOne

I'm proud to say that my 600th post is one informing my EG-EJ brothers that I am keeping my hatch!
I can't wait to brake the motor in a see what it can do with a nice tune

damn son, good thing u keep that bad matha... i gotta see it some time :goodjob:
10-15-2007, 05:48 PM
puregroove

Quote:

Originally Posted by TheChosenOne

I'm proud to say that my 600th post is one informing my EG-EJ brothers that I am keeping my hatch!
I can't wait to brake the motor in a see what it can do with a nice tune

Right on, man. I was where you are about 3 months ago. :goodjob:
10-15-2007, 06:49 PM
Andy_013

Quote:

Originally Posted by TheChosenOne

I'm proud to say that my 600th post

249 more to reach 600 post
10-15-2007, 07:28 PM
TheChosenOne

Quote:

Originally Posted by JDM_EK4

Cool, what motor you have and mods?

Mods... well, lol.... only a few....

GSR block bored to .020 over
PR3 oversized pistons with coated walls
Hastings piston rings
ACL Racing rod and main bearing
PasswordJDM Magnetic oil plug
ARP head bolts
PORTED & POLISHED B16 head
Type R valve springs on intake side
ITR cam shafts
Skunk2 cam gears
New valve seals
Precision 310cc injectors
PasswordJDM injector jumper harness
Walbro 255 fuel pump
CompTech race header (bronze)
Custom piping with Spoon silent exhaust

For the time being, I'm going to have to run the stock injectors because with the 310s on it, it floods out if I give it more than 20% throttle
10-15-2007, 07:32 PM
TheChosenOne

That's right, your car was up for sale... U live in gwinnett, but I've never seen you.

Man.... i got two sweet cars, but I can't afford to have both of them, and everyday I keep switching on which one I want to keep...

I really want to keep the hatch, but every time I see my integra in an empty parking lot under a street light at night... I get chills. Don't get me wrong, eg's are sexii, but my db1 does something to me... the only thing is, it's slow as hell!

Quote:

Originally Posted by puregroove

Right on, man. I was where you are about 3 months ago. :goodjob:
10-15-2007, 07:54 PM
cactusEG

Quote:

Originally Posted by TheChosenOne

That's right, your car was up for sale... U live in gwinnett, but I've never seen you.

Man.... i got two sweet cars, but I can't afford to have both of them, and everyday I keep switching on which one I want to keep...

I really want to keep the hatch, but every time I see my integra in an empty parking lot under a street light at night... I get chills. Don't get me wrong, eg's are sexii, but my db1 does something to me... the only thing is, it's slow as hell!

yea i remember seeing u at the V honda meet in the tegg..
10-15-2007, 09:37 PM
GSRteg®

Quote:

Originally Posted by TheChosenOne

That's right, your car was up for sale... U live in gwinnett, but I've never seen you.

Man.... i got two sweet cars, but I can't afford to have both of them, and everyday I keep switching on which one I want to keep...

I really want to keep the hatch, but every time I see my integra in an empty parking lot under a street light at night... I get chills. Don't get me wrong, eg's are sexii, but my db1 does something to me... the only thing is, it's slow as hell!

:camera: of the hatch. :yes:
10-16-2007, 06:35 AM
Grimm Reeper

Quote:

Originally Posted by TheChosenOne

Mods... well, lol.... only a few....

GSR block bored to .020 over
PR3 oversized pistons with coated walls
Hastings piston rings
ACL Racing rod and main bearing
PasswordJDM Magnetic oil plug
ARP head bolts
PORTED & POLISHED B16 head
Type R valve springs on intake side
ITR cam shafts
Skunk2 cam gears
New valve seals
Precision 310cc injectors
PasswordJDM injector jumper harness
Walbro 255 fuel pump
CompTech race header (bronze)
Custom piping with Spoon silent exhaust

For the time being, I'm going to have to run the stock injectors because with the 310s on it, it floods out if I give it more than 20% throttle

That looks fun, I wonder how I would stand up to that, it would be a nice run, but would have to wait till we are both tuned. :lmfao:
10-16-2007, 06:37 AM
Grimm Reeper

Quote:

Originally Posted by cactusEG

yea i remember seeing u at the V honda meet in the tegg..

Ohhhhhhhhhhhhhh so that's who you are. I didn't drive my car that day, but I rode my bike.
10-16-2007, 10:06 AM
GSRteg®

What's new fam.
10-16-2007, 12:34 PM
GSRteg®

4 Attachment(s)

Here are the picks from the valve cover... :D
10-16-2007, 01:12 PM
Andy_013

looks better than my valve cover :goodjob:
10-16-2007, 01:20 PM
GSRteg®

Had to paint it engine bay looked to plain.
10-16-2007, 01:21 PM
Grimm Reeper

Wuzzup everyone?
10-16-2007, 01:22 PM
Grimm Reeper

Quote:

Originally Posted by GSRteg®

Here are the picks from the valve cover... :D

Looks Good JR
10-16-2007, 01:29 PM
puregroove

Quote:

Originally Posted by JDM_EK4

Looks Good JR

+1
10-16-2007, 01:57 PM
korilee13

so i realized that i spend way too much time on IA but all i do is look at whats being said. i guess out of fear that i dont know much about this stuff yet, and i dont wanna look like a dumba ss. but i guess i'll be the guy QD is gonna be picking on next because damm*t i need more posts
10-16-2007, 02:01 PM
GSRteg®

Quote:

Originally Posted by korilee13

so i realized that i spend way too much time on IA but all i do is look at whats being said. i guess out of fear that i dont know much about this stuff yet, and i dont wanna look like a dumba ss. but i guess i'll be the guy QD is gonna be picking on next because damm*t i need more posts

It's all good man don/t you worry about QD you just post what you want when you want and were you want. :yes:
10-16-2007, 02:04 PM
puregroove

Quote:

Originally Posted by korilee13

so i realized that i spend way too much time on IA but all i do is look at whats being said. i guess out of fear that i dont know much about this stuff yet, and i dont wanna look like a dumba ss. but i guess i'll be the guy QD is gonna be picking on next because damm*t i need more posts

posting and searching... asking questions.. That's how I learned. :goodjob:
10-16-2007, 04:54 PM
Grimm Reeper

lol, all I can say is don't say anything that you wouldn't ownd yourself for :lmfao:
10-16-2007, 04:58 PM
Grimm Reeper

But anyway guys I tracked the rest of my parts and they should be here by friday, so that's when I'll probaly pull out the D16 out of my EJ1, pulling out the harness, cleaning the bay and installing the mounts. So with that being said I'm really giving myself 3 days to get this **** right on the first time :lmfao:, but I can have it done in 1, just want to make sure everything is working right and plugged in. So JR when do you wanna come over and HELP!!!! :lmao: and bring some fawk'n TOOLS!!!! :lmfao: j/k
10-16-2007, 06:07 PM
Grimm Reeper

This is gheyyyyyyyyyyy everybody has a life, so I guess I don't have much choice but to start getting ready for another long night in paradise :lmfao: a.k.a fawk'n WORK!!!!
10-16-2007, 07:15 PM
cactusEG

Quote:

Originally Posted by korilee13

so i realized that i spend way too much time on IA but all i do is look at whats being said. i guess out of fear that i dont know much about this stuff yet, and i dont wanna look like a dumba ss. but i guess i'll be the guy QD is gonna be picking on next because damm*t i need more posts

yea man like every one said dont worry about any one else. asking questions is how u learn and fucc the haters :goodjob:
10-16-2007, 07:45 PM
GSRteg®

Quote:

Originally Posted by JDM_EK4

But anyway guys I tracked the rest of my parts and they should be here by friday, so that's when I'll probaly pull out the D16 out of my EJ1, pulling out the harness, cleaning the bay and installing the mounts. So with that being said I'm really giving myself 3 days to get this **** right on the first time :lmfao:, but I can have it done in 1, just want to make sure everything is working right and plugged in. So JR when do you wanna come over and HELP!!!! :lmao: and bring some fawk'n TOOLS!!!! :lmfao: j/k

Tony just let me know and Im there Im just a call away seriously. :goodjob:
10-17-2007, 01:05 AM
GSRteg®

I'm tired going to sleep holla fam.
10-17-2007, 06:28 AM
Grimm Reeper

Morn'n Everyone, I'm bout to take my ass to bed.
10-17-2007, 08:02 AM
Dyno

Good morning. :bump:
10-17-2007, 09:48 AM
cactusEG

YESSSSSSSSS. its my day off today :goodjob: but i have to work saterday morn:tongue1: :(
10-17-2007, 01:40 PM
GSRteg®

Quote:

Originally Posted by cactusEG

YESSSSSSSSS. its my day off today :goodjob: but i have to work saterday morn:tongue1: :(

Awesome :goodjob:
10-17-2007, 02:03 PM
cactusEG

Quote:

Originally Posted by GSRteg®

Awesome :goodjob:

not really but kinda. i rather be making money !

Show 100 post(s) from this thread on one page