ATTEN: EJ-EG drivers check in! ! ! NWS

Printable View

Show 100 post(s) from this thread on one page

09-26-2007, 04:08 PM
puregroove

sup fellers:::

got new carpet on its way.. :goodjob:
09-26-2007, 04:26 PM
Grimm Reeper

Quote:

Originally Posted by puregroove

sup fellers:::

got new carpet on its way.. :goodjob:

Wuzz going on Eddie..
09-26-2007, 04:35 PM
puregroove

Quote:

Originally Posted by JDM_EK4

Wuzz going on Eddie..

not much, man. Trying to get all of my interior back in. Then, the hatch will go back up for sale. :goodjob:
09-26-2007, 05:20 PM
cactusEG

Quote:

Originally Posted by ORGANIZATIONXIII

fo sho..

just been on that grind..

done any thing cool in san antone?
09-26-2007, 06:55 PM
GSRteg®

Quote:

Originally Posted by cactusEG

good deal gone right. I've been thinking that we should make a FS/WTB thread in our section. For parts, for our years of cars :dunno:

Sounds good! :goodjob:
09-26-2007, 10:06 PM
bafbrian

Now if I could sell my Type R bottom end and get that swap I want, I would be set. I know you all someone that would like a Type R bottom end for cheap. Spread the word.
09-26-2007, 10:34 PM
GSRteg®

BUMP
09-27-2007, 06:01 AM
Grimm Reeper

Morn'n
09-27-2007, 10:32 AM
GSRteg®

Quote:

Originally Posted by JDM_EK4

Morn'n

Whats going on Tony? :thinking:
09-27-2007, 10:55 AM
cactusEG

Quote:

Originally Posted by GSRteg®

BUMP

?????
09-27-2007, 12:04 PM
Grimm Reeper

Not too much JR. I'm try'n to get my head back to the machins shop by tomorrow.
09-27-2007, 01:28 PM
puregroove

stock brake pads are lame... brake dust FTL.. :no: lol

--makes me clean my rims too often.
09-27-2007, 01:53 PM
Grimm Reeper

yo check'n in again
09-27-2007, 02:24 PM
GSRteg®

Quote:

Originally Posted by JDM_EK4

Not too much JR. I'm try'n to get my head back to the machins shop by tomorrow.

Sounds good.
09-27-2007, 05:13 PM
GSRteg®

Wired up VTEC today all by myself kinda feels good lol. Hmmm its faster than before DAMN faster, but I have a CHECK ENGINE LIGHT ON does anyone know how to tell whats wrong?
09-27-2007, 05:18 PM
puregroove

What code is it throwing?
09-27-2007, 05:20 PM
puregroove

http://honda-tech.com/zerothread?id=682412
09-27-2007, 08:02 PM
GSRteg®

Quote:

Originally Posted by puregroove

What code is it throwing?

How can I tell the ECu doesn't have the blinking light?
09-27-2007, 08:06 PM
GSRteg®

Quote:

Originally Posted by puregroove

http://honda-tech.com/zerothread?id=682412

Ah, never mind got it thanks Eddie. :goodjob:
09-27-2007, 08:07 PM
puregroove

"Watch your check engine light on your cluster. it will flash.. 1 long flash is 10. the quick flashes are one. so if ur CEL goes !.....!!! that is a code 13. !....!....!!!!! code 25. then take the code #'s and hop on this thread and see what it is."
09-27-2007, 08:08 PM
puregroove

:goodjob:
09-27-2007, 08:26 PM
GSRteg®

Im hopping that its this little plug that im holding in my hand that its asking for... didint plug it in so will see. :thinking:
09-27-2007, 11:03 PM
Dyno

What up Fam?
09-27-2007, 11:16 PM
puregroove

sup man::
09-28-2007, 05:09 AM
Grimm Reeper

Yo, JR you bring the newly built Hatch to the meet :thinking:
09-28-2007, 07:31 AM
cactusEG

Quote:

Originally Posted by JDM_EK4

Yo, JR you bring the newly built Hatch to the meet :thinking:

yea i'd like to see the beast..
09-28-2007, 09:21 AM
Grimm Reeper

Quote:

Originally Posted by cactusEG

yea i'd like to see the beast..

:lmfao:
09-28-2007, 12:41 PM
GSRteg®

Quote:

Originally Posted by cactusEG

yea i'd like to see the beast..

Will see... :ninja:
09-28-2007, 11:21 PM
Grimm Reeper

Wuzzup............
09-28-2007, 11:23 PM
cactusEG

Quote:

Originally Posted by JDM_EK4

Wuzzup............

drinking 151 with my brother, have a cup tony lol :goodjob:
09-28-2007, 11:25 PM
Grimm Reeper

Thanx man....
09-28-2007, 11:28 PM
cactusEG

Quote:

Originally Posted by JDM_EK4

Thanx man....

good huh lol this **** is strong :yes:
09-29-2007, 01:09 AM
japan4racing

Quote:

Originally Posted by japan4racing

just got done taking these...im not a photographer so i appologize for the ****ty pics. this is at what used to be a drag sttrip here in warner robins. it closed down in the early 90's and now its nearly gone...i wish it was still here.

http://i133.photobucket.com/albums/q...g/100_0945.jpg
http://i133.photobucket.com/albums/q...g/100_0946.jpg
http://i133.photobucket.com/albums/q...g/100_0947.jpg
http://i133.photobucket.com/albums/q...g/100_0948.jpg

**update**

new set-up coming:

benson sleeved block
9:1 cp pistons
eagle rods
micropolished crank
supertech valves, springs and retainers
portflo port and polish
00-01 itr cams
precision 1000cc injectors
edelbrock victor x
arp head studs
t3/t67 h.o.
etd traction bars
omni drag coilovers in the rear
hondata s200
6pt roll bar
quaife lsd

and more!!!!

stay tuned i will post pics whe i get more **** in.

itr cams

http://i133.photobucket.com/albums/q...g/100_1029.jpg
http://i133.photobucket.com/albums/q...g/100_1027.jpg

edelbrock victor x manifold

http://i133.photobucket.com/albums/q...g/100_1026.jpg

random gaskets, nuts, and a timing belt

http://i133.photobucket.com/albums/q...g/100_1025.jpg

pte 1000cc injectors

http://i133.photobucket.com/albums/q...g/100_1024.jpg

traction bars and a cat!

http://i133.photobucket.com/albums/q...g/100_1023.jpg

on order still not here:

arp head studs
breather tank
steel braided hose for breather
an fittings for breather
battery relocation kit

once the head is sent off im looking for a quaife. h-t has a pretty bitchin deal right now that i may get on...$785 shipped

also looking at a hondata s200 p72 with all options except datalogging, and some lenso's with m&h 24.5" x 8.5" x 13"s. this car is gonna be fun
09-29-2007, 06:28 AM
Grimm Reeper

Morn'n everyone....Meet in one more day JR you better have insurance back on the hatch...:lmfao:
09-29-2007, 08:42 AM
GSRteg®

Quote:

Originally Posted by JDM_EK4

Morn'n everyone....Meet in one more day JR you better have insurance back on the hatch...:lmfao:

I might not go have to convert the 1 wire o2 to 4 wire and run it to the ECU for the DAMN engine light to turn off. Maybe that will fix since it only spit one code out... btw dont need insurance just slap one of my dads dealership tag's and im good. :goodjob:
09-29-2007, 10:33 AM
Grimm Reeper

Quote:

Originally Posted by GSRteg®

I might not go have to convert the 1 wire o2 to 4 wire and run it to the ECU for the DAMN engine light to turn off. Maybe that will fix since it only spit one code out... btw dont need insurance just slap one of my dads dealership tag's and im good. :goodjob:

lol... keep'n it in the family I see....hhhmmm

I just got my 98 coupe over my house finally, and got my head. As soon as I take pics I'll put them up. Eddie I'm a need for you to hold on to that EG for a lil while I want to see if I can hang with that 1.8 or hhmmmm 2.0 :thinking: or 2.4, I know it's not SOHC... :lmfao:

Jose get that damn A/C fixed and not be cheap..lol, did you ever call that number I gave for your windshield?
09-29-2007, 10:51 AM
GSRteg®

Still having problems with the check engine light wont go off. :(
09-29-2007, 11:16 AM
cactusEG

Quote:

Originally Posted by JDM_EK4

lol... keep'n it in the family I see....hhhmmm

I just got my 98 coupe over my house finally, and got my head. As soon as I take pics I'll put them up. Eddie I'm a need for you to hold on to that EG for a lil while I want to see if I can hang with that 1.8 or hhmmmm 2.0 :thinking: or 2.4, I know it's not SOHC... :lmfao:

Jose get that damn A/C fixed and not be cheap..lol, did you ever call that number I gave for your windshield?

lol i do need to stop being a cheap scape :lmfao:... but like always im broke kind of ..:(
09-29-2007, 12:45 PM
Grimm Reeper

I got my swap up for you guys to view
09-29-2007, 01:17 PM
cactusEG

Quote:

Originally Posted by JDM_EK4

I got my swap up for you guys to view

i saw that props for joooo... **** i wish i know how to swap a car and take it apart and put it back together :(

Show 100 post(s) from this thread on one page