naw man srry...Originally Posted by JayL
naw man srry...
good morning everyone.
Morning mike, btw project de-rice is looking VVVVEEERRRYYY good. ways to go but looking good. Later
Well how does $50 sound for a good OEM one.
Good afternoon everyone. I'm bored at work and sleepy! But, it's all good.
me to, im about the fall asleep at work
I'm looking at car parts to keep me awake now. Question: ITR pistons or CTR pistons for a LS/VTEC (daily driven)?
I would do CTR.
I'm so bord right now. Just sitting on the side of the road waiting on 3pm. zzzzzz may go early just to get my next job started.
Yeah, I'm not a rocket scientist.
Sitting on the side of the road???
Listen to GSRteg and you'll blow your motor upI would do CTR.
That would give you a c/r too high for pump gas. I would use p30 pistons (oem b16 pistons). That would bump your c/r up and put u low enough to run pump gas
remember ctr pistons are a no no in a 1.8 block because of the dome
Last edited by bigdare23; 03-25-2008 at 05:55 PM.
I was in a neborhood sitting on the side off the road. plus I'm in a utility van I sit where I want. I'll pull the utility right away card.Sitting on the side of the road???
sup folks... Couldn't get on here yesterday thanks to fuuckin bellsouth. but whats up and how is e1
how many miles is on it, will it fit my D16Y7 motor? and I will need to make sure that thing is tested for good before I get it in hand sirWell how does $50 sound for a good OEM one.
28 . female . I has VTEC . hondachik .
S.I.C. Chic (Split Image Customs II)
are you sure it was bellsouth I couldn't get on for a long time yesterday but everything else was working.
got a caliper at the junkyard today, $20!!!
Ok so I moved my battery from the bin behind my seats to under the hood in a custom location. I did this so I could pass tech inspections at commerce drag strip. What you think?
That sucker is in there to. It wont ever move if you pull on it in all directions. I do plan on redoing it once I get a press break.
looks good mike, you should gloss that rex man!
Look at bigdare23 being all smart lol. Mr.KiDD posted this up a while ago, good stuff! CTR pistons are only good in b16Listen to GSRteg and you'll blow your motor up
That would give you a c/r too high for pump gas. I would use p30 pistons (oem b16 pistons). That would bump your c/r up and put u low enough to run pump gas
remember ctr pistons are a no no in a 1.8 block because of the dome
KEEP IT SIMPLE, Vteckidds Guide to NA
does it work ?
Miles 122,000 tested when I bought the car which housed the Y8 that is in my hatch... but I guess you dont believe me that its in good condition thats cool.how many miles is on it, will it fit my D16Y7 motor? and I will need to make sure that thing is tested for good before I get it in hand sir
you going to sell the Y8 to her ?
hey kim
have you taken yours off and had it tested yet?
I would jump on that. $50 is a really good price.
Lol, I'm going to be using a B18B1 block though. So, I should NOT get the CTR's right?Look at bigdare23 being all smart lol. Mr.KiDD posted this up a while ago, good stuff! CTR pistons are only good in b16
KEEP IT SIMPLE, Vteckidds Guide to NA
What the hells wrong with IA I've been tring to get on all day. I know its not my phone its going on to my work site fine.
Good afternoon everyone.
LMAO, yeah. I almost went into shock because I had nothing to do until it came back up. I actually had to break down and do work.
soo anyone doing the Scavenger Hunt??? anywase my teins came today...yes!!!! cant wait to get that ***** up and running with all my parts...
my honda is going to be running friday morning. cant wait
the del sol is going to be alive tonight, o yea
http://kpfphotography.showitsite.com/
www.Drifted.com
www.flickr.com/photos/kpfphotography
Nikon D90*18-105mm f3.5-5.6*35mm f1.8
Whats good fellas ?
Hey thnx guys. I'm going to actually have it rebuilt. I have a shop down here that can rebuild it for $89.95 so I'm going to do that instead, but thanks a lot. So I'm taking it off tomorrow hopefully and have it taken to the facility so that they can test it. He said it will only take a few hours to rebuild.
28 . female . I has VTEC . hondachik .
S.I.C. Chic (Split Image Customs II)
Whats up e1..
plus labor ?
No the alternator since I converted the Y8 to OBD1 I dont need it and its laying around.
Its a very good price especially knowing it works.
damn right thats a great price. If i didn't already have 3 I would take it.
THE DEL SOL IS ALIVE!!!!
got the LS swap and Auto-Manual conversion done in the sol, is running well, only have to change out some brakes and it will be on the road tommorow!
also big thanks to all those that helped, kenny did the partial wire tuck and helped with a lot.
a few pics of the engine complete: the last one is of kenny.....
and kenny..
Looks goodTHE DEL SOL IS ALIVE!!!!
got the LS swap and Auto-Manual conversion done in the sol, is running well, only have to change out some brakes and it will be on the road tommorow!
also big thanks to all those that helped, kenny did the partial wire tuck and helped with a lot.
a few pics of the engine complete: the last one is of kenny.....
and kenny..
yea shut up, i was tired, a little wired and ready to go home.
http://kpfphotography.showitsite.com/
www.Drifted.com
www.flickr.com/photos/kpfphotography
Nikon D90*18-105mm f3.5-5.6*35mm f1.8
When you say whats good, you shouldn't just address it to the fellas...uhmmmm there are some ladies here to hooker! :boobies:
"Drop 5 stacks on the makeup bag"
Posting Permissions
Reply With Quote
