ATTEN: EJ-EG drivers check in! ! ! NWS

Printable View

03-25-2008, 07:27 AM
cactusEG

Quote:

Originally Posted by JayL

does anyone have a left front 92-95 civic caliper????

i need one yesterday!!!!

naw man srry...
03-25-2008, 09:09 AM
Mad Mike

good morning everyone.
03-25-2008, 09:57 AM
happysol1982

Morning mike, btw project de-rice is looking VVVVEEERRRYYY good. ways to go but looking good. Later
03-25-2008, 10:28 AM
GSRteg®

Quote:

Originally Posted by hondachik

$180 shipped on ebay for a high perfomance one. $150 for a remanufactured high performance one. Remanufactured here @ Oreilly's they are $109. I'm not sure about junkyard pricing yet.

Well how does $50 sound for a good OEM one. :goodjob:
03-25-2008, 11:49 AM
Just_CHill

Good afternoon everyone. I'm bored at work and sleepy! But, it's all good.
03-25-2008, 12:02 PM
cactusEG

Quote:

Originally Posted by tchill

Good afternoon everyone. I'm bored at work and sleepy! But, it's all good.

me to, im about the fall asleep at work :(
03-25-2008, 12:12 PM
Just_CHill

I'm looking at car parts to keep me awake now. Question: ITR pistons or CTR pistons for a LS/VTEC (daily driven)?
03-25-2008, 12:34 PM
GSRteg®

Quote:

Originally Posted by tchill

I'm looking at car parts to keep me awake now. Question: ITR pistons or CTR pistons for a LS/VTEC (daily driven)?

I would do CTR. :D
03-25-2008, 01:05 PM
Mad Mike

I'm so bord right now. Just sitting on the side of the road waiting on 3pm. zzzzzz may go early just to get my next job started.
03-25-2008, 01:17 PM
Just_CHill

Yeah, I'm not a rocket scientist.
03-25-2008, 01:33 PM
Just_CHill

Quote:

Originally Posted by Mad Mike

I'm so bord right now. Just sitting on the side of the road waiting on 3pm. zzzzzz may go early just to get my next job started.

Sitting on the side of the road???:???:
03-25-2008, 02:31 PM
bigdare23

Quote:

Originally Posted by tchill

I'm looking at car parts to keep me awake now. Question: ITR pistons or CTR pistons for a LS/VTEC (daily driven)?

Quote:

Originally Posted by GSRteg®

I would do CTR. :D

Listen to GSRteg and you'll blow your motor up :lmfao:

That would give you a c/r too high for pump gas. I would use p30 pistons (oem b16 pistons). That would bump your c/r up and put u low enough to run pump gas

remember ctr pistons are a no no in a 1.8 block because of the dome
03-25-2008, 02:42 PM
Mad Mike

Quote:

Originally Posted by tchill

Sitting on the side of the road???:???:

I was in a neborhood sitting on the side off the road. plus I'm in a utility van I sit where I want. I'll pull the utility right away card.
03-25-2008, 04:52 PM
PURP

sup folks... Couldn't get on here yesterday thanks to fuuckin bellsouth. but whats up and how is e1
03-25-2008, 05:07 PM
hondachik

Quote:

Originally Posted by GSRteg®

Well how does $50 sound for a good OEM one. :goodjob:

how many miles is on it, will it fit my D16Y7 motor? and I will need to make sure that thing is tested for good before I get it in hand sir:goodjob: . Like, I would need it this Friday.
03-25-2008, 05:19 PM
Mad Mike

Quote:

Originally Posted by b18eg6

sup folks... Couldn't get on here yesterday thanks to fuuckin bellsouth. but whats up and how is e1

are you sure it was bellsouth I couldn't get on for a long time yesterday but everything else was working.:thinking:
03-25-2008, 05:22 PM
JayL

got a caliper at the junkyard today, $20!!!
03-25-2008, 05:29 PM
Mad Mike

Ok so I moved my battery from the bin behind my seats to under the hood in a custom location. I did this so I could pass tech inspections at commerce drag strip. What you think?
http://i123.photobucket.com/albums/o...r/battery5.jpg
http://i123.photobucket.com/albums/o...r/battery2.jpg
That sucker is in there to. It wont ever move if you pull on it in all directions. I do plan on redoing it once I get a press break.
03-25-2008, 06:06 PM
JayL

looks good mike, you should gloss that rex man!
03-25-2008, 06:48 PM
JDMjoe

Quote:

Originally Posted by bigdare23

Listen to GSRteg and you'll blow your motor up :lmfao:

That would give you a c/r too high for pump gas. I would use p30 pistons (oem b16 pistons). That would bump your c/r up and put u low enough to run pump gas

remember ctr pistons are a no no in a 1.8 block because of the dome

Look at bigdare23 being all smart lol. Mr.KiDD posted this up a while ago, good stuff! CTR pistons are only good in b16 :yes:
http://www.importatlanta.com/forums/...ad.php?t=79418
03-25-2008, 07:56 PM
cactusEG

Quote:

Originally Posted by JayL

got a caliper at the junkyard today, $20!!!

does it work ?
03-25-2008, 10:50 PM
GSRteg®

Quote:

Originally Posted by hondachik

how many miles is on it, will it fit my D16Y7 motor? and I will need to make sure that thing is tested for good before I get it in hand sir:goodjob:

Miles 122,000 tested when I bought the car which housed the Y8 that is in my hatch... but I guess you dont believe me that its in good condition thats cool.
03-26-2008, 07:17 AM
cactusEG

Quote:

Originally Posted by GSRteg®

Miles 122,000 tested when I bought the car which housed the Y8 that is in my hatch... but I guess you dont believe me that its in good condition thats cool.

you going to sell the Y8 to her ?
03-26-2008, 08:34 AM
Mad Mike

Quote:

Originally Posted by GSRteg®

Miles 122,000 tested when I bought the car which housed the Y8 that is in my hatch... but I guess you dont believe me that its in good condition thats cool.

hey kim
have you taken yours off and had it tested yet?

I would jump on that. $50 is a really good price.
03-26-2008, 08:48 AM
Just_CHill

Quote:

Originally Posted by JDMjoe

Look at bigdare23 being all smart lol. Mr.KiDD posted this up a while ago, good stuff! CTR pistons are only good in b16 :yes:
http://www.importatlanta.com/forums/...ad.php?t=79418

Lol, I'm going to be using a B18B1 block though. So, I should NOT get the CTR's right?
03-26-2008, 01:48 PM
Mad Mike

What the hells wrong with IA I've been tring to get on all day. I know its not my phone its going on to my work site fine.

Good afternoon everyone.
03-26-2008, 01:57 PM
Just_CHill

LMAO, yeah. I almost went into shock because I had nothing to do until it came back up. I actually had to break down and do work.
03-26-2008, 02:50 PM
EJdm

soo anyone doing the Scavenger Hunt??? anywase my teins came today...yes!!!! cant wait to get that ***** up and running with all my parts...
03-26-2008, 02:52 PM
bkwjdm101

my honda is going to be running friday morning. cant wait
03-26-2008, 04:32 PM
KPFphotography

the del sol is going to be alive tonight, o yea
03-26-2008, 05:36 PM
cactusEG

Whats good fellas ?
03-26-2008, 06:41 PM
hondachik

Hey thnx guys. I'm going to actually have it rebuilt. I have a shop down here that can rebuild it for $89.95 so I'm going to do that instead, but thanks a lot. So I'm taking it off tomorrow hopefully and have it taken to the facility so that they can test it. He said it will only take a few hours to rebuild.
03-26-2008, 06:49 PM
PURP

Whats up e1..
03-26-2008, 09:35 PM
cactusEG

Quote:

Originally Posted by hondachik

Hey thnx guys. I'm going to actually have it rebuilt. I have a shop down here that can rebuild it for $89.95 so I'm going to do that instead, but thanks a lot. So I'm taking it off tomorrow hopefully and have it taken to the facility so that they can test it. He said it will only take a few hours to rebuild.

plus labor ?
03-26-2008, 10:45 PM
GSRteg®

Quote:

Originally Posted by cactusEG

you going to sell the Y8 to her ?

No the alternator since I converted the Y8 to OBD1 I dont need it and its laying around.

Quote:

Originally Posted by Mad Mike

hey kim
have you taken yours off and had it tested yet?

I would jump on that. $50 is a really good price.

Its a very good price especially knowing it works.
03-26-2008, 11:04 PM
Mad Mike

Quote:

Originally Posted by GSRteg®

Its a very good price especially knowing it works.

damn right thats a great price. If i didn't already have 3 I would take it.
03-26-2008, 11:21 PM
JayL

THE DEL SOL IS ALIVE!!!!

got the LS swap and Auto-Manual conversion done in the sol, is running well, only have to change out some brakes and it will be on the road tommorow!

also big thanks to all those that helped, kenny did the partial wire tuck and helped with a lot.

a few pics of the engine complete: the last one is of kenny.....

http://i164.photobucket.com/albums/u.../motorrun1.jpg
http://i164.photobucket.com/albums/u...tallmotor2.jpg
and kenny..
http://i164.photobucket.com/albums/u...motorkenny.jpg
03-26-2008, 11:45 PM
GSRteg®

Quote:

Originally Posted by JayL

THE DEL SOL IS ALIVE!!!!

got the LS swap and Auto-Manual conversion done in the sol, is running well, only have to change out some brakes and it will be on the road tommorow!

also big thanks to all those that helped, kenny did the partial wire tuck and helped with a lot.

a few pics of the engine complete: the last one is of kenny.....

http://i164.photobucket.com/albums/u.../motorrun1.jpg
http://i164.photobucket.com/albums/u...tallmotor2.jpg
and kenny..
http://i164.photobucket.com/albums/u...motorkenny.jpg

Looks good
03-26-2008, 11:54 PM
KPFphotography

yea shut up, i was tired, a little wired and ready to go home.
03-27-2008, 06:58 AM
ilovemyhonda.

Quote:

Originally Posted by cactusEG

Whats good fellas ?

When you say whats good, you shouldn't just address it to the fellas...uhmmmm there are some ladies here to hooker! :boobies: