What have you done to your EF today?

**BABY J** · 07-05-2009, 01:10 AM

^^ You put that car back together THIS INSTANT!!! Showoff.

What am I doing? Well --- hmmm ---- read this list: (driver number 95)

http://www.indyhp.com/streetcarshootout/registered.php

**Mad Mike** · 07-05-2009, 08:31 AM

Yesterday I started putting rings in my d15b7 block so I can use it until my z6 is done. Got halfway done and my crappy drill battery died so I'll finish it tonight and probably pull the z6 out this coming up weekend. Should be interesting d15b7 all stock internals, z6 head and intake running 10psi. I don't care if it will last.

**green91** · 07-05-2009, 09:01 AM

It will last just fine, i boosted my 160k+ d15b2 at 11-12psi for probably 6-7 mos, beating the heck out of it all the time. I finally took it out because it was using so much oil. Turns out the oil control rings were seized, i could have re-ringed it and thrown it back in.

**Mad Mike** · 07-05-2009, 09:38 AM

I hope it lasts longer than my stock z6. only drove it 5 times over 3 weeks and it failed.

Does anyone know if the z6 oil pan will work on the d15b7? The b7 oil pan is dented from where it fell off the engine hoist. plus my z6 pan already has the oil drain on it for the turbo.

thanks

Ed · 07-05-2009, 10:07 AM

i am prob gonna go clean it, the outside, interior is pretty clean right now, bleed the brakes, and adjust the clutch today.

then get it tagged this week :P

**green91** · 07-05-2009, 10:18 AM

I recall the b2 oil pan not fitting the z6 because the oil baffes were in different locations and hit the pickup, but i never tried the z6 pan on the b2

Ed · 07-05-2009, 10:22 AM

^http://www.honda-tech.com/showthread.php?p=10261709

i was trying to find out if it fit or not cause i am trying to sell my old b2 oil pan... but it seems like it doesnt.

**southside** · 07-05-2009, 01:09 PM

Originally Posted by Ed

i am prob gonna go clean it, the outside, interior is pretty clean right now, bleed the brakes, and adjust the clutch today.

then get it tagged this week :P

Im guessing the dizzy workd

**Mad Mike** · 07-05-2009, 03:57 PM

Originally Posted by Ed

^http://www.honda-tech.com/showthread.php?p=10261709

i was trying to find out if it fit or not cause i am trying to sell my old b2 oil pan... but it seems like it doesnt.

yea i got to do some research on it tonight. I'm wanting to put a d16Z6 oil pan on the d15B7

Ed · 07-05-2009, 04:00 PM

Originally Posted by southside

Im guessing the dizzy workd

yeah. it cranks. i was stoked when it first cranked up. check out my "build" thread, if you wish to call it that.

Originally Posted by Mad Mike

yea i got to do some research on it tonight. I'm wanting to put a d16Z6 oil pan on the d15B7

i got a d15b2 oil pan, if all you want is functionality, i think it would fit.

let me know if you want it.

**Mad Mike** · 07-05-2009, 04:03 PM

thanks but i have a few oil pans its just the z6 one has the oil drain for my turbo already on it.

**BABY J** · 07-08-2009, 03:50 PM

Originally Posted by BABY J

^^ You put that car back together THIS INSTANT!!! Showoff.

What am I doing? Well --- hmmm ---- read this list: (driver number 95)

http://www.indyhp.com/streetcarshootout/registered.php

I didn't win the NA/4 class but yall bitches got HELL on your hands w/ the non-vtec powa - I'm gonna enjoy what happens next.

And that's WITH an LS tranny (which will be remedied in a week). Game on.

I got taken out by a h2b EG hatch w/ unknown mods, but not before personally eliminating:

1) gutted DC2 2 door / cammed(?) / B18C / bolt-ons - LSD (plus more)

2) modded rx8 (RWD FTL - LOL)

3) GSR swapped CRX w/ unknown mods

This was w/ full weight and the bags from my trip, and on street tires. Even w/ that said this car is def more at home from the roll - not the dig. I'm coming back in a week and I'm coming to hunt - get cha shit dialed in.

**JEY$JDM** · 07-08-2009, 05:25 PM

Changed oil..

**VickNotic** · 07-08-2009, 05:41 PM

Originally Posted by KevinT707

On Sat Darryl came through, picked up DA caliper brackets for me from Pull-A-Part, drove to my house, & gave me a hand on doing my Fast-Brakes front big brake upgrade. Props to BigDare forsure for helping me out so that I could make it to Import Alliance. Brakes faster than a Veyron now

Brake upgrade consisted of: 91' Civic EX Master Cylinder, 11" VW Corrado Rotors, Fast-Brakes conversion kit, Reman DA calipers, and SS brake lines.

yeah you thank all of them, but no thanks for the man who finished the shieT for you huh... wata moFO!!

**southside** · 07-09-2009, 08:04 AM

installed clutch cable,speed sensor and other little shit fuel lines misc. stuff.Found out I gotta beat the subframe more because my alternator was touchn so I grinded it down now it clears but just to be safe going to dent it in some more.

**BABY J** · 07-09-2009, 11:59 AM

When is IA? I am heading to St Louis on Sat morning for a week - I didn't plan on going but depending on when it is I can stop through on my way back to ATL. Oh - and to keep things on subject - I ordered some 404s today for the Fagovan and some "other shit"

**Humphrizzle** · 07-09-2009, 03:09 PM

cleaning it.. every day i have time.. waiting to be able to afford another transmission. mine has hole in it.

sadness.

**JEY$JDM** · 07-10-2009, 09:01 AM

Fixed my exhaust from hitting dead animal... yuck

Everything good teh go now!

**Black R** · 07-11-2009, 01:07 AM

i got a new exhaust welded up thanks to mainstream.

bosozuko styleeee boi!

**JEY$JDM** · 07-11-2009, 08:27 AM

2mrw... I get Ksport LCA's and rear camber kit! Yessssss

**southside** · 07-12-2009, 05:05 PM

Went to Pull a part and pulled a dash harness for 2hours.

**The Yousef** · 07-12-2009, 05:10 PM

did a full MKV GTI swap today...

worth it.

**Mad Mike** · 07-12-2009, 10:53 PM

I put mine up for sale today. Ready to move o to a new project.

**Sir_Christopher** · 07-13-2009, 12:27 AM

**JEY$JDM** · 07-13-2009, 01:10 PM

LCA's and rear camber kit... 2mrw

I would today, but have to work tonight, so I has to get some sleep!

**Sir_Christopher** · 07-14-2009, 02:04 AM

looked for suspension... anyone? humm, i could use it

**Revmaynard** · 07-14-2009, 02:07 AM

I'm probably going to do some ''body work'' tomorrow. lol

**Humphrizzle** · 07-14-2009, 03:01 AM

I neeeed a fender and bumper filler.. then I finish cleaning interior and then sanding for bondo

**JEY$JDM** · 07-14-2009, 07:47 AM

Off work... About to go put sum Ksport under teh hatch!

**southside** · 07-14-2009, 11:24 AM

Originally Posted by Ef_ftw73

dammit those bitches started without me and my brother told you about that tranny right?

**JEY$JDM** · 07-15-2009, 11:22 AM

Got my LCA's on... They look good!

**JEY$JDM** · 07-15-2009, 10:12 PM

Got and put on a red tail light mid section off an Si/DX!!!! Looks way better than the black mid peice.
Also, I repainted my wiper arms black!!!!

***EFilliated*** · 07-22-2009, 12:24 PM

yesteday i put an 89 crx si cluster in my 91 ef. took me like 1hour and a half. looks nice.

**Terror** · 07-23-2009, 12:09 AM

Put a B16A2 in that bish!!

**southside** · 07-23-2009, 10:22 AM

put back mount in and shift linkage doing engine harness today.Also messed up my driver side moulding because I left door open when I was pushing into the garage and got a dent in it now.SHIT!

**JEY$JDM** · 08-24-2009, 04:36 PM

Put a Personal steering wheel... OEM mud guards, and new starter. Oil changed again.. Si front seats.. And I think thats it...?

**ATLem1** · 08-28-2009, 09:44 PM

put my a/c compressor back in... just need to get a vac and charge

**southside** · 09-01-2009, 08:46 AM

Well hooked up everything and shit tried to start the beast and didnt wanna start for me.Havent checked to see if its got spark but it has fuel.And some dumb fuck did the wire tuck wrong and check engine light comes on when I turn on head lights.

Ed · 09-01-2009, 08:56 AM

I drove it today...

and made it to work.

On a serious note, latest additions have been right side mirror, DA shift knob and steering wheel.

I iz broke now. No monies.

**BABY J** · 09-02-2009, 09:01 AM

Originally Posted by southside

Well hooked up everything and shit tried to start the beast and didnt wanna start for me.Havent checked to see if its got spark but it has fuel.And some dumb fuck did the wire tuck wrong and check engine light comes on when I turn on head lights.

Ricer.

Thread: What have you done to your EF today?

Thread Tools

Display

Posting Permissions

About us

Announcement