b16a swap help

[jriley60]

i have an ac bracket from innovative mounts but i can't seem to figure out how to keep the ac and the power steering they both won't fit in anyone know what i'm doing wrong?

[rbwdriven]

I've got the ac bracket mounted in my hatch but i do not have power steering.

I know it was a "b" to get it in behind the factory header.

I'm thinking you will be close on the ac and power steering steering trying to be in the same area at the same time.

Richard

[jriley60]

guess i'm going to say bye bye to the p/s

[rbwdriven]

I started searching i can Find anything. have you put a thread about it on honda-tech. maybe you can get an answer there. Or maybe the educated 12 year olds might know how to do it.

[ground_shaki]

i had the d series bracket for the ac on my b16, but also no power sterring....but you can try it

[bigdare23]

I never seen anyone run ps in a b-swap ef before.

[LIKEG6]

+1 DARE

Don't come with ps anyway

[bigdare23]

Don't come with ps anyway

Actually, some EFs (EDs) come stock with ps. My hatch has ps. I dont see the point, but it's still pretty cool.

[LIKEG6]

Both of mine didn't have it

[JDMJAYDC2]

Actually, some EFs (EDs) come stock with ps. My hatch IS a pos. I dont see the point, but it's still pretty cool.

fixed it for you Dare

[sakasaku]

who need AC and PS that what windows were invented for if you have a problems with that in the winter then

[bigdare23]

fixed it for you Dare

okay mr. lazy corner lights

[jriley60]

i decided to just scrap the p/s. i need the ac, i have a 2 1/2 year old son and the old 480 a/c (4down 80mph) won't cut it. my car came stock with p/s it's an ex 4dr, but i found a nice write up on how to use a t fitting and an old clutch reservoir to get rid of it so

[LIKEG6]

Yea make sure you convert it right because otherwise you will wear out the rack faster because it is a power steering rack and not a manual one

[jfrolang]

Just swap in a manual rack. It's pretty simple.