EF Squad F/S & WTB Thread (Sept Oct Nov Dec)

[bigdare23]

You know the drill

WTB RED


FS GREEN


NO WHORE'N UP THIS THREAD (Take it to the pm or our whoreslounge)

AFTER YOU SELL SOMETHING DELETE IT!!!!

Also, posts that are not posted correctly will be deleted

[Papa_Smurf]

WTB : 88-89 front bumper, rear bumper, and side moldings

[revized_DX]

wtb a decent RUNNING d series motor! this quart every other day is getting old and i need to get my car right!

[JDMJAYDC2]

^pm sakasaku i know he has a full one for sure or bigdare23

[sakasaku]

^pm sakasaku i know he has a full one for sure or bigdare23

It needs Distibutor,wires, trans, rear mount, clutch, flywheel, alternator

[N/A EK]

FS:
-1991 Civic Hatch DX , milage 200K on shell. Comes with a full d16A6 swap. The car has nopi #1 brand coilovers with tokico front shocks, rears r stock. hayame catback exhaust, fat5's.

Price: $1000.


If anyone is iterested, PM me and ill get u some picks of everything.

[revized_DX]

It needs Distibutor,wires, trans, rear mount, clutch, flywheel, alternator

i just need something i can drop and go for now, i have a top end from an a6 but needs maching and i dont think i have the time to save and wait for machine shop, the little b.itch scared me last night coming up 985, bucked real hard like it was locked up for a half a second(literally) but did good on the way home just had that one issue, hasnt done it since though. plus the wiring and getting a new ecu i mean if i had the time and funds right now, for sure, i would do it but i get paid WEAKLY (not mispelled) and times are tight and diapers arent going down in price! im ready to say the hell with it and take my chances at pull a part and just go snag a motor from there and cross my fingers....


im actually almost sure that its a valve seal and thats what the leak is, could probably use just a head (still running dpfi) if anyone has just a head lying around but then i will know if it is the head for sure...havent done compression/leakdown lately, i just keep shoving oil in it and praying eveytime i start it to go somewhere. and sorry didnt mean to get off topic of thread...

[Farrow2005]

WTB 90-91 front and rear bumpers. PM me please

[N/A EK]

***FOR SALE ONLY***
WILL NOT PARTOUT

Make: HONDA
Model: Civic DX
Year: 1991
Milage: 200K on shell
Motor: d16a6 out of a 91 CRX Si, 5spd (around 120-140k) no smoke and pulls hard.
VIN#: UPON REQ!


The good:

• Over all the the body is in good condition. I have a full D16A6 sitting in my garage that will come with the car. The car has Nopi#1 coilovers with tokico front shocks , rears sre stock. Fat5's with brand new tires, Hayame exhaust (looks brand new). Amber corner lights, ceramic 4-2-1 header. Rear no name strut bar, aftermarket taillights, aftermarket steering wheels.
  
  
  
  

The bad:

• Dent in pass. fender, primered black, ripped driver seat, gutted(only in the rear), no carpet, dented piece under driver taillight (dont kno what its called), little crack in windshield. Other then that everything is good workin condition.

I have more question feel free to contact me @ 404-421-7004 call/txt.

Price: $1,000


*** If the car doesnt sell in 3 weeks, everything will be fixed and painted to OEM color, and ofcourse the price goes up ***


Only pictures I have right now, will take more over the weekend.

[B_Hoov]

WTB
all parts for 90 ef hatch
-hood
-pass side door
-rear cargo cover
-rear speaker pods
-both front fenders
-front lip
-bumper filler or aftermarket bumper that deletes it

i have a fully built d that im on the fence about selling.
eagle h beam rods
JE 9:5:1 pistons with optional ceramic coating
ARP 2000 rod bolts (block had to be shaved)
ARP head studs
JE rings and wrist pins
bad ass block guard
ACL race and journal bearings
ready to make 300whp on boost/spray and be reliable!
1200obo
will throw in stock z6 head and honda 954rr itb's that i JUST finished fabbing up for 1800, itb's are plug and play no tricky stuff.

[B_Hoov]

the Dominator

[southside]

WTB:EF Hatch Headliner and passenger mirror

[Georgia_boy]

WTB:EF Hatch Headliner and passenger mirror

There r 2 hatches at the pick-a-part in fairburn. they r just about complete.
I dont know the prices, but I got my PR4 ecu and a new cluster for $40.

[southside]

There r 2 hatches at the pick-a-part in fairburn. they r just about complete.
I dont know the prices, but I got my PR4 ecu and a new cluster for $40.

shhhhhhhhhh they dont know about that place that was only for me and you to know about did you see the si thats out their?

[Georgia_boy]

shhhhhhhhhh they dont know about that place that was only for me and you to know about did you see the si thats out their?

yeah, lol whats left of it.

[Georgia_boy]

WTB: 1) 90-91 gauge cluster
must have tach and all gauges working.
2) B18 aftermarket header

[sakasaku]

WTB: Gsr or B16 head!!! Need ASAP PM or txt 678-230-9105 or call the head i have now is usless cause no cam caps came with it! so help a brother out

[southside]

yeah, lol whats left of it.

U must have stripped it

[southside]

Wtb:Black EF hatch Cover

[LoveGirl]

WTB: 88 CRX steering column
[IDK if any EF steering column will work but if it will, I'm all for it.]

[rbwdriven]

WTB: headliner for a 89 civic si.

[AnTi-PooN]

FS: semi built LS VTEC ef swap mounts and all 2700

b18a1 block with rebuilt and balanced crank, ctr pistons, new oem rods, new acL rod bearings

JDM B16 head with all itr internals, port and polish, blox itr manifold, bdl fuel rail, 375cc(i think) injectors, brand new dizzy

pw0 chipped and tuned ecu, vtec at 5500 rpm

hasport mounts, ls tranny (unknown condition)

NO PART OUTS

[bigdare23]

^^^I wasn't expecting that

[southside]

^^^I wasn't expecting that

Me either thought you said it ran like a bat of out hell

[revized_DX]

D-series blockswapping head sunday and broke a damn head bolt and cant get it out so needless to say i need a block!

[bigdare23]

WTB DA manual half shaft

[JDMJAYDC2]

^^ i acutally think tony has one of those

[slow_hatch]

WTB DA manual half shaft

What year?

[slow_hatch]

WTB:

90-91 Civic
Passenger side door
Front fenders
Bumper filler piece
Driver's side corner light
Passenger side mirror

CRX dash(any year)

[bigdare23]

What year?

90/91 or anyone that fixs a y1 tranny

[southside]

90/91 or anyone that fixs a y1 tranny

What you mean anyone that fixs a y1 tranny you mean fits? If you need you tranny fixed I got a friend that works at acura transmission repair can get it done.

[jriley60]

What you mean anyone that fixs a y1 tranny you mean fits? If you need you tranny fixed I got a friend that works at acura transmission repair can get it done.

nah the intermediate shaft on motors with the y1 tranny have about a 1 inch difference than the others. so the axles are different. they are the SiR axles integra's are about 1 inch longer. so to be able to use the integra one's we gotta switch the intermediate shaft...i'm in the same boat

[southside]

I might be able to get you one let me talk to my friend and see because he has alot of stuff at his shop.He closing in a lil while so hes going to be getting rid of parts

[B_Hoov]

91 EF hatch hood
91 EF hatch bumper filler
EF hatch windshield
EF hatch cargo cover (gotta hide the N2o)



still got my built D
pro race fogger system (direct port ) by NOs BNIB
Z6 head
d sereis cbr 954rr itb's gettin all pretty and welded next week (plug n play)
stock Z6 intake mani (plugs/sensors/throttle body included)
EF squad memberz...you don't want me to have this stuff, i don't wanna hear no crying when decide keep it and out of no where there is a SOHC EF whoopin that DOHC @$$

300whp SOHC=ballers only

[jriley60]

wtb: 90 -93 integra trailing arm...just the trailing arm don't need any of the brake stuff

[EuroTra$h]

wtb corner lenses for a 91 si plaease

[Kalifornia087]

Parts are for a 1990 CRX
WTB: Drivers Side window
Driver side fender

Also
WTB: Motor for 1988 HF crx. If it has a trans with it that would be cool too. But def. need a motor.

[Farrow2005]

WTB FRONT BUMPER 90-91 hatch

PM meh plz

[SlamminCRX]

WTB: OBD 0 B16 Dizzy.

For Sale
Passenger and driver side doors for 90-91 ef hatch. (have everything...moldings, panels. etc. $100 each

Passenger Side Fender - $50.

Front Bumper - $50

Rear Bumper - $40 (has a tiny dent on top right side.)

B16A Block...only 50k miles on it, includes stock b16 flywheel and clutch. $150

[JDM SLiViC]

F/S or trade
Got 3 hatch cargo covers. all of em are blue.
88 dx hatch cluster
88 duel point pm5 ecu
88-91 hatch SI-R mid wing

Need 88/89 si rex or 89 si hatch front seats. dont care if they are ripped.
obd0 si dizzy
Crx or hatch hood
jdm center console haha if thats even possible!

*Atleast follow the rules posted in this thread*
Bigdare23