largest wheel height and width without scrubbing? im not looking to put like 18's on there. actually i want 15x7.5 +40 and im wondering if theyll scrub?
CRX wheel/tires
largest wheel height and width without scrubbing? im not looking to put like 18's on there. actually i want 15x7.5 +40 and im wondering if theyll scrub?
EF SQUAD FTMFW!!!!
nope... 15, even with a 205/50 will be fine... That's what I"m running, tucking about .5" of tire without any scrubbing issues.
-jonathan
[/URL]
Jesus Christ is my Savior
those are pretty low pro arent they?Originally Posted by CRXseven
EF SQUAD FTMFW!!!!
they're a lot bigger than 40s like you were talking about.
+40 is a good offset to have, that's not "crazy" or anything. Crazy on a honda is +15 or +0.
-jonathan
Jesus Christ is my Savior
didn't u say you has a crazy offset too SL65AMG?
UPROOT Photography FTW
+40 i guess thats crazy....
EF SQUAD FTMFW!!!!
i ride on stock wheels, so what do i know
i have stockers too.... but thats why i wanna know what fits.i ride on stock wheels, so what do i know
this is what im looking at:
http://www.nfcperformance.com/slipst...ck-p-2008.html
the price is a bit outrageous but thats the wheels i want
EF SQUAD FTMFW!!!!
a better place to buy those wheels is www.modacar.com, the price is much more reasonable there.
205/50 is the perfect size to run with those wheels.
-jonathan
Jesus Christ is my Savior
steelies ftw.
<---Click it.
i refuse to rock the steelies..... my paint looks bad enough.... at least i can have nice wheelz
EF SQUAD FTMFW!!!!
Got this from H-T this might help when choosing tires
What size tires should I get?
The proper size depends on your car, not just the wheels you are using.
For a CRX, del sol, or pre-'96 Civic, the following sizes are usually best:
13" - 175/70-13
14" - 185/60-14, 195/55-14
15" - 195/50-15
16" - 205/40-16, 195/45-16
For an Integra or '97-00 Civic, the following sizes are usually best:
14" - 185/65-14, 195/60-14
15" - 195/55/15, 205/50-15
16" - 205/45-16, 215/45-16
17" - 205/40/17
This is open for discussion and by no means what you have to get, but as a general rule you cannot go wrong with these sizes.
thanks man. reps
EF SQUAD FTMFW!!!!
here's the pics I promised:
Racing Hart CP035
15 x 7.5, +40 offset
I'd actually recommend a 15x8 in +24 offset though.....
here's the pics I promised:
Racing Hart CP035
15 x 7.5, +40 offset
I'd actually recommend a 15x8 in +24 offset though.....
Jfrolang going to die when he see those rims LOL
I he was searching hard for them, but couldn't find them anywhere. So he had to settle for the rota version
VERY nice man. i like those a lot. 15x8 you say? +24here's the pics I promised:
Racing Hart CP035
15 x 7.5, +40 offset
I'd actually recommend a 15x8 in +24 offset though.....
that wont scrub? those are pretty beefy wheels..... i like the idea though
who sells that size wheel? (brands)
EF SQUAD FTMFW!!!!
plenty of brands would make that size
care to clue me in cuz i havent found any. whats a good site to look for wheelsplenty of brands would make that size
EF SQUAD FTMFW!!!!
First decide your price range and style and then I can direct you to a site.
Do you want a "real" rims or a knock off?
Do you want to pay $300 or $1500?
Do you want new or use?
those are hawt.
now if you'd just paint your car.....lol
here a site with just about every wheel made
http://www.wheelspecs.com/
Decide on what rim you want then go on the hunt!
Like me, I always wanted a set of RS Watannabes/SSR RS-8. It took me about four years (and three sets of wheels) to finally get them for a reasonable price. They aren't in the best condition (thats why they not on the car yet), I got what I want! Now I'm about to pay about $500 (on top of the price of them wheel) just to get them restored to the condition I want them to be in. Dont forget I got to invest in some tires too LOL. Gotta pay to play!!!!
I know this place may (or may not) be in your budget, but check it out for some ideas.
www.jdmland.com
Oh yeah, Ken forgot to add his car is 5lug so his rims options are endless compared to out 4x100 setup LOL
.....SSR Longchamps for me
can't find those in a 4x100 though. I'd have to pull a dirtyoctopus and switch out my hubs JUST to run a sweet 4x114.3 wheel.
-jonathan
Jesus Christ is my Savior
CRXwolf had a polished set on his rex for a min.
{if you dont know who he is, then your not a true CRX fan LOL}
Jarco... I'm from columbus man; I'm not familiar with the atlanta stores.lol
-jonathan
Jesus Christ is my Savior
Wait...I just realized that Jarco isn't even a 15 minute drive from my house...
Well I know where I'm going to be tomorrow and this weekend.Anyone care to join me?
Wait...I just realized that Jarco isn't even a 15 minute drive from my house...
Well I know where I'm going to be tomorrow and this weekend.
Shame on you!!!
Well someone should of told me they were located in CANTON!!!
I would of told ya, but I thought you knew since you stay in that aread.
LOL, nah I'm surprised no one I know has told me, not just you.
Of all the mechanics and import people I know around here, none of them have ever mentioned Jarco. I'm almost disappointed in them...
what's the point of wide ass rims? a good 6 or 6.5 will be be fine unless your building a race car
^ it's amazing how noticeable the difference between a 6.5" and a 7" tire is in a hard corner.
Step it up a notch to 8" and lateral grip is a lot better. Although 8" is a little overkill on anything other than a drag car...
-jonathan
Jesus Christ is my Savior
I still dont see the purpose on a dd. It's not like you're rally racing or doing mountain runs every week.
What's the purpose/point of modifying your dd at all?
-jonathan
Jesus Christ is my Savior
mostly looks
*sigh*
-jonathan
Jesus Christ is my Savior
dont pay him any mind
if you dont drive it whats the point of modifying it? to look at it in the driveway
im prolly gonna get some 15x7.5 unless i find some 8's that i like
EF SQUAD FTMFW!!!!
Posting Permissions
Reply With Quote
