My si had rust and had alot of body damage, my new crx which is the red one (HF) is cleaner in the inside and the body is in great conditions with no rust or leaks anywhere. The Si was just to Fucked up for me to even bring it close to being the cleanest EF around town, it needed way to much body work plus bondo LOL, my CARB motor was actually making it worse so I had to put the regular (D series) motor back in it and sell it asap because I think it was bad luck.
Last edited by toonz; 01-21-2007 at 07:57 PM.
Still here!
Most companys make iridium plugs. I can't stand those either lolOriginally Posted by JokerTypeR
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
--RIP Val, You will be missed--
You must spread some Reputation around before giving it to drunk.scotsm again.
Sorry Drunk LOL
Still here!
NGK Makes Iridium plugs too I believe. I used to run them in my dirtbike. I also ran a Protruded end in my dirtbike as well. I'd like to find out if there's enough clearance that i could run them in my car. I think there is. But i'll have to check it out firrst lol
Fuck iridium plugs.
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
Why do you say that? They work good for some applications. Just as do cheap plugs. I know a guy who had a car that wouldnt run right unless it had cheap ass Champion Plugs. lol
I would never run iridium in any of my vehicles. There is no point, and plus my CRX is turbo with nitrous so the LAST thing I need is hotter burning plugs.
My CRX: NGK V-Power
My 510: NGK Standard
My 4Runner: Denso Factory Plugs
I have tried other plugs in my CRX in the past and all they have done is either made it run like shit, fouled out OMG fast, or both. I'm not paying twice the money for a spark plug that is nothing but a gimmick IMO.
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
Actually, they're NGK iridium's (the ones I HAD in). They're in the LS. They're supposedly the "better plug". They were in the engine when I got it...
JDMadness ==>EvasiveEF9
Hey, EF'ers. I'm looking for a 91 civ hatch helms manual. Tried downloading. Only got the one for the 88-89 CRx.
I've also got the 90-93 teg and 94+ teg if anyone happens to need 'em.
JDMadness ==>
just got off the phone with jhot! , my b16 is shippin out tonight!!! joker i might have the manual you are lookin for on my roomates comp , i'll check and let ya know!
dnwp
Thanks. I just wanan check a couple sensors and stuff...it'll hopefully help me to find the problem with my civ. There's question to the map sensor being bad...
JDMadness ==>
If they all work the same, I can have my friend look up in the Haynes I had for my EK on how to test the MAP Sensor. I know its something to do with an Ohm's meter lol
Well, I looked at the Teggy Helms, and according to it, if the map IS infact messing up, it should give me a code. ECU throws no codes...
JDMadness ==>
what up, what up, its k money checkin in
1989 - CRX Dx(thats what i was told, i believe its an Si) - lowered 2", Zc swap thats about it - Lilburn/Stone Mountain area
so whats this for anyways?
EF SQUAD FTMFW!!!!
Profiling. Now we know where you live, your occupation and social security number. That way we can steal your social security when you're a senior citizen...if there's anything left when you hit that age.
JDMadness ==>
Ohhh, I gotcha
dnwp
You must spread some Reputation around before giving it to drunk.scotsm again.
My EF: Sorry for not having engine pics.
(Last EF meet)
Very old pics (about a year now):
Post pics of it and I will tell you exactly what it is. Yes, I am that good.
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
lol
dnwp
If have a sunroof its a Si. If your cluster has a redline of like 5000rpms and have a shift light then its a hf. Last if your engine harness was modified in anyway (mpfi swap) then its a dx. Those are like the easiest ways to tell the difference between models.
As for the purpose of this thread. Well, when I goto different meets I see a lot of EFs that I never see at the EF meets. I ask them why they don't come out? They respond "I didn't know about it." So I'm making a list of all the EF drivers so we all can keep in touch. Plus, if you need something for your EF, more than likely one of the people on my first post has it or can find it for you.
The more Recent Photo is the one without the Orange $hit all over it
I liked the Orange but it got old over time.
Oh and all I run is a Little DOHC ZC thats it not that Great but She's My Baby.
Time Line.
Last edited by spoon91; 01-22-2007 at 11:06 PM.
Spoon91
IA's only German Leprechaun.
Im here Kids LOL ToonZ
Still here!
soon.
And miles to go before I sleep,
And miles to go before I sleep.
yes i agree , soon!
dnwp
Spoon, it appears you can't find rims you like...nor can you find front bumper lights you like.
How'd you make that lip in the front?
JDMadness ==>
Well about the Wheels.
I kinda have 7 sets right now
1 set of 17in MOMOs
4 sets of shock Wheels
6 13 in. Steeles and
A set of UGLY ASS 14's that came on My '87 3rd Gen 4dr Civic GL and
I'm about to buy a Set of Rota RB's 13"x8" just for everyday Driving.
The Bumper lights are the some ones I just Shot them Amber and then made them Clear again.
As for the Corner lights I did them Amber aswell but when I made the Bumper lenses Clear
I just put the Stock ones back on.
Spoon91
IA's only German Leprechaun.
I have also had
A set of '02 EP3 Civic SI Wheels
A set of '95 GSR Fives
A set of '06 Fit Sport Wheels
A set of 16" Konig GTR's (Old school Boy) and
A set of 17" Edge Wheels
So needless to say I'm a Whore!!!
the only Photo I have of the SI's are on My '02 Civic some time ago
But I do have one $hit Photo of the Fit's The GTR's and the Edge's.
Last edited by spoon91; 01-23-2007 at 09:05 AM.
Spoon91
IA's only German Leprechaun.
i loved my konig gtr's.
And miles to go before I sleep,
And miles to go before I sleep.
So I see u finally decided to post in the EF check-in thread, halfwit.
And yeah spoon91 your a hoe! LOL
check like 3 pages ago homie...
And miles to go before I sleep,
And miles to go before I sleep.
Spoon, still curious about that lip in the front...
I want/need to find me something smaller than my 17's, I just can't afford to buy right now. I'm thinking 15 or 16 rota slips or circuits. Just gotta get money...
JDMadness ==>
Halfwit's scared to post lol
Still here!
Damn man we have alot of EF owners but I know there are more out there
Still here!
Honestly...we should make another EF thread and list what people can do to help each other out (EF only) I mean...I dont' like lending my tools, but if I can help an EF'r out, I will. For example, I've got a cherry picker, a bunch of misc parts, the helms (hardcopy) manual, and I'm experienced all the way around on those D15's, and doing alot of work to them... Maybe make like a "no comments" one or something? I don't know, jstu a thought. It'd be cool if I had to do something and got lost and could look up in this "directory" who had done the same kind of work before so I could contact them and ask them. I've been asked god knows how many times about my brake swaps...
JDMadness ==>
jmmx258 your car looks good! Alot of people on here are quick to bash people and their cars with kits are considered RICE but IMO I think people build there cars to his or her's own unique personality and some kits can look good on cars, if you just dress them up right LOL but +1 for you
Last edited by toonz; 01-23-2007 at 10:21 PM.
Still here!
word. also .... maybe set up a gwinnett meet or close to it. ( lilburn/snellville/stone mtn area) thats a fairly central location.) theres an old grocery store parking lot off hwy 78 and west park pl. in stone mtn that has been vacant for YEARS ans i think it will be a great place to meet.
im down for going to meets but dont really wanna drive an hr. plus to get there
EF SQUAD FTMFW!!!!
Hey Big We need another EF Meet Bro hook Us up.
Spoon91
IA's only German Leprechaun.
Posting Permissions
Reply With Quote
