EF Squad's WhoresLounge

[toonz]

Damn! What's up? The Sky, LOL

[toonz]

Man us EF'ers really get shit done around this Bitch, LOL, I'm proud of you all!

[toonz]

Im going to get off my ass and fix my crx soon, LOL, maybe she fucks up because she wants me to stay here in Atlanta 24/7, LOL

[bigdare23]

Toonz
Number 1, pick up your damn phone!
Number 2, get your lazy ass up and fix your car.
Number 3, tell my baby (you mama) I'll be over there soon with the childsupport I owe her for you hahahahahahahah.

[EvasiveEF9]

LoL...damn clownz (no...really, did I get it right, this time? LoL)

Yeah...going to see "Knocked up" tonight.

Catch ya'll on the flip.

[GsrCrx]

yo what up man, well i used to have a zc turbo on the hatch but i blew it, so we swapped a built mine me on the car, but when it starts it idles fine, but as soon as i press the gas it dies, so im thinking it has to be vacums or a electrical problem, but its throwing code 5 6 13 and 20, had a couple of guys take a look at it but they cant figure it out, thanks.......

[EvasiveEF9]

...are you the dude that called me?

[bigdare23]

LoL...damn clownz (no...really, did I get it right, this time? LoL)

Yeah...going to see "Knocked up" tonight.

Catch ya'll on the flip.

"Ya'll some damn clowns" is better but close enough

[bigdare23]

yo what up man, well i used to have a zc turbo on the hatch but i blew it, so we swapped a built mine me on the car, but when it starts it idles fine, but as soon as i press the gas it dies, so im thinking it has to be vacums or a electrical problem, but its throwing code 5 6 13 and 20, had a couple of guys take a look at it but they cant figure it out, thanks.......

Yeah your dude with the turbo rover motor that had his friend dyno at the last dyno meet.


{what you did with that motor?}

[bigdare23]

yo what up man, well i used to have a zc turbo on the hatch but i blew it, so we swapped a built mine me on the car, but when it starts it idles fine, but as soon as i press the gas it dies, so im thinking it has to be vacums or a electrical problem, but its throwing code 5 6 13 and 20, had a couple of guys take a look at it but they cant figure it out, thanks.......

5=MAP Sensor (Manifold Absolute Pressure) mechanical problem / disconnected piping


6=ECT Sensor (Engine Coolant Temperature) defective circuit or unplugged / defective sensor

13=BARO Sensor (Atmospheric Pressure) defective circuit or unplugged / defective sensor

20=Electrical Load Detector defective circuit or unplugged / defective sensor


looks like you have some bad sensors or a few unplugged items.

[EvasiveEF9]

Check the fuses, and test the sensors. I'll throw up a link to a helms manual if you need it. Keep us posted. Also, check ALL your vac lines...

[GsrCrx]

whats up yall, well the rover motor i had on it is gone, its cracked all the way around and piston cracked, but the guy that took it to the dyno when it wasnt running well kept it anyways, the thing is that a couple of people have already checked it and they said the sensors were good, and they cant figure out the vacuums since its turbo, if anyone on here knows how to fix this please let me know, and i will pay you to fix this...... thanks

[bigdare23]

BigDare's car is finally put back together!!!

Today I painted and reinstalled my lip and mounted my wheels back.
Thursday my 90-91 molding came in so I installed that.
All I need is a DA rear wiper arm so arm can clear my wing.
Also, I'm going to repaint my wiper arms black again!

[Halfwit]

werd?

[Black R]

hmmm....

so who all has had to cut into the cross member to get the headers to fit on their b16?

I don't have a b16, but on my swap I had to cut the shit out of the front crossmember with an aftermarket header...

After that, I wanted traction bars, so I got the jimfab joints and had to cut that too for clearance!

So best solution is to get the fullrace traction bars, imho.

[Halfwit]

avid racing traction bars here, almost identical to full race, at 1/4 price.

[Halfwit]

and no cutting when u stay d series!!

except for your wrists when it never fucking runs.

[GsrCrx]

jajaja i hear that bro, lol +1

[Papa_Smurf]

where did you get your traction bars at? And how much did the cost?

[bigdare23]

I don't have a b16, but on my swap I had to cut the shit out of the front crossmember with an aftermarket header...

After that, I wanted traction bars, so I got the jimfab joints and had to cut that too for clearance!

So best solution is to get the fullrace traction bars, imho.

They dont make those anymore (cuz I was looking for a set)

fullrace ones are high as hell and stock radiators dont work with them.

[bigdare23]

avid racing traction bars here, almost identical to full race, at 1/4 price.

Yeah I went to nopi to try and them right, the damn non-knowing what the hell he's talking about sells clerk couldnt find them and then start giving me prices for swap bars

I was like swap bars =/ tractions bars and walked out shaking my head.

when I get the money again i'm going back with the part number.

[quickdodge®]

bigdare, you have PM. Later, QD.

[bigdare23]

where did you get your traction bars at? And how much did the cost?

ebay (around $200-$250)
nopi (around $350)
Fullrace ($500) + their radiator
jimfab (dont know cuz you cant get them anyway)

[quickdodge®]

What about the grandfather of the EF? You could always use an EB in the mix, you know. Later, QD.

[bigdare23]

What about the grandfather of the EF? You could always use an EB in the mix, you know. Later, QD.

LOL

[quickdodge®]

Ahhh damn. Left the shit in limbo. Won't hurt my feelings if you sway the nay way. Lolol. But if your guess is yes, then rest assured the best will rep. Lolol, again. Later, QD.

[bigdare23]

Ahhh damn. Left the shit in limbo. Won't hurt my feelings if you sway the nay way. Lolol. But if your guess is yes, then rest assured the best will rep. Lolol, again. Later, QD.

You are a damn clow QD


You need to come out and hang with you grandchildren the EFs

carb>>>FI

[quickdodge®]

Ok, I'll take that as a No. But I'll still check things out. Later, QD.

[Halfwit]

love to see the papa civic QD.

[bigdare23]

Ok, I'll take that as a No. But I'll still check things out. Later, QD.

just bs'n

[quickdodge®]

Lolol. Yessir. I will gladly take you people under my fender and lead you to the way of the CVCC. Later, QD.

[bigdare23]

just for everyone info.........


QD is the newest EF squad member!!!

[Halfwit]

woot woot.


remember what u said when we posted pics of last years meet?
thought u hated us.

[quickdodge®]

woot woot.


remember what u said when we posted pics of last years meet?
thought u hated us.

Actually, I don't. I also don't recall EF having a group like this last year. I also don't hate anyone. Later, QD.

[Halfwit]

just something i remember.

[quickdodge®]

just something i remember.

You can shoot me a PM if you want. I honestly don't remember this. Later, QD.

[Halfwit]

it was a while ago, but SENT.

[SiGuy]

couple of questions...

1. do you have to live in atl to be apart of the ef squad
2. what do you have to do to get in
3. what is a ef? rofl....j/k

[Papa_Smurf]

1. It's best to be in Georgia somehwere to be part of the squad, that way you can get to know everyone in the squad, but you'd have to talk to one of the OG's for an official ruling on that one

2. No requirements other than you need to have an EF to my knowledge.

3. I think's its sum kind of golf cart of some sort.

[EvasiveEF9]

1. No.
2. Nothing. Own one. Come to meets. Post up. Be active.
3. Don't be gay.