Quote Originally Posted by dallasb84 View Post
well.....spraying outside is expensive...... if you do it right....

sherwin williams make a clear coat that you can wet sand and buff in 15 minutes..... thats right..... 15 minutes...

it is hard in 7 minutes....

and its 215 ish a gallon.....

otherwise...... your going to end up with a mess if you use conventional clear coat outside.....

it will look like someone took a handfull of snad and threw it on your car..... thats what dust will do...

also...... with spot clear..... sherwin williams hpc15 is recomended for panel painting.... and with panel painting it is not recomended to paint heavy metalics.... and lighter colors......

you have a chance of tiger striping having a 1/4 panel darker or lighter than a door... and so on....

only colors i paint out of a booth is black.... its easy to shine and hide paint defects....
have you ever tried clearing a whole car with about 3 coats with a clear that dry's in 7 min's. thats a mother fucker lol. i screwed up and grabbed some and started clearing a whole car. that sucked.