<<<Official Columbus, GA Discussion Thread>>>

[jfryer496]

I just need to get mine repainted. lol....

thatll never happen.. if ur talkin bout the rsx lol... he fucked my shit up... just sayin. charged me out the ass and wont fix it.....

[justnprsh07]

Just let me know when your ready... No rush

[ultm8mind]

I'm ready to get mine painted!!

Also, my car suddenly just won't start (civic). Turn key and all bells and whistles come on, starter will not turn at all. Battery has 12.6v on terminals and this is the first issue I've had with this old POS since I re-did it. Any suggestions? After work I am going to take a multimeter to the starter and see if there is voltage there as Pops turns the key, but other than that I am lost. Any pointers will be appreciated.....thanks in advance.

[Fox351]

Have you ever driven one? I was slightly skeptical at first myself - but after having actually owned one now, I can definitely see why people get attached. and yes, this car is prepped to go wide. And it shall be so before the end of the year.

-jonathan

Sean is correct I did ride in his blue 240. I was impressed with the mechanical side of the vehicle but the actual "feel" of the car wasn't for me. I wouldn't mind it having wide tires and wheels just as long as they stay perpendicular to the ground. Although its your car so you can do what ever you want to it.

[ash7]

I'm ready to get mine painted!!

Also, my car suddenly just won't start (civic). Turn key and all bells and whistles come on, starter will not turn at all. Battery has 12.6v on terminals and this is the first issue I've had with this old POS since I re-did it. Any suggestions? After work I am going to take a multimeter to the starter and see if there is voltage there as Pops turns the key, but other than that I am lost. Any pointers will be appreciated.....thanks in advance.

Check your starter signal wire, homie.

-jonathan

[JAY5]

or main relay.

[99jdmLs]

thatll never happen.. if ur talkin bout the rsx lol... he fucked my shit up... just sayin. charged me out the ass and wont fix it.....

Oh I know that- never want him to touch my car again. He told me to drop my hood off to get fixed but im afraid if i do ill never get it back or it will fly out of his truck.....when i stated i want to get mine repainted i mean by someone else. i added up and list the amount of problems ive had with the paint and things he did/broke- its gonna cost me more to fix it than it would have been for justin to have painted the car..... no offense by saying that justin, you pay for quailty.

[justnprsh07]

Yep u deff get what u pay for... I try to help ppl out and ill try to save you money where I can but I wouldnt fuck anyones car up and even if I did I would fix it for free...as I warranty all my work, also alot off ppl dont know but im the only technician in columbus certified to repair carbon fiber.

Who are yal talkin about anyway?

[99jdmLs]

I pmed you justin

[ultm8mind]

Damn sucks your shizz is jacked up Richie. Justin, when I get this POS back on the road I'll need it painted. I hear red is expensive, but I either want that or that "rootbeer metallic" color....I gotta have you check it out and lemme know what the damage to my pockets will be though before I jump into anything. I don't have cash flow like Rich, lol.....

[GetFRESH!]

I either want that or that "rootbeer metallic" color....

Rootbeer metallic? Psh. Ugly color imo. Way overrated too.

[ultm8mind]

haha, I see. I just like it, looks black in some ways and looks brown up close.....

[justnprsh07]

Damn sucks your shizz is jacked up Richie. Justin, when I get this POS back on the road I'll need it painted. I hear red is expensive, but I either want that or that "rootbeer metallic" color....I gotta have you check it out and lemme know what the damage to my pockets will be though before I jump into anything. I don't have cash flow like Rich, lol.....

Lol no prob man just let me know... We can figure something out with what u need done and how much u want to spend

[ultm8mind]

I gotta figure this start issue out first though bro, going to mess with it today....

[99jdmLs]

if richie had money flow lile you speek of, he would be rocking an 08 TL-S by now. lol

[ultm8mind]

ok, so little update

- has +12V on B/W wire at the fuse box when key is turned
- has 8mV under hood at jack/plug where I think is the first place I can see it under the hood

- all fuses are good, has all ignition noises and lights on dash, when key is turned no noise

CONFUSION!! Anyone know where the lines from the fuse box run into the engine bay? Anyone wanna lend a hand? I don't think it's the starter, I think problem is before it.

[ash7]

ok, so little update

- has +12V on B/W wire at the fuse box when key is turned
- has 8mV under hood at jack/plug where I think is the first place I can see it under the hood

- all fuses are good, has all ignition noises and lights on dash, when key is turned no noise

CONFUSION!! Anyone know where the lines from the fuse box run into the engine bay? Anyone wanna lend a hand? I don't think it's the starter, I think problem is before it.

Shoot me your number in a PM bruce. I'll give you a hand.

-jonathan

[ultm8mind]

So, after a little research it may be the clutch solenoid. I am going to jump the switch at the pedal and see what I get. See what we get there.

Jon, I PM'd you also.

[nycclaye]

anyone know of a shop that can do a head gasket swap and cylinder compression test?

[-S Double C-]

columbus custom exhaust IF you want a shop to do it

[kte324]

columbus custom exhaust IF you want a shop to do it

X2.

[jfryer496]

wheres the best place to get a jdm gsr swap

[kte324]

wheres the best place to get a jdm gsr swap

Japan.

[ultm8mind]

Japan.

That's some funny shit right there

[jfryer496]

lol.....

[nycclaye]

columbus custom exhaust IF you want a shop to do it

are they good?

[ultm8mind]

Can someone host some pics for me? My stuff isn't working and I am trying to put an ad up for the Volks, PM me if you can hook a brotha up.

[justnprsh07]

are they good?

Yea there good, but what u needing done?

[nycclaye]

need a compression test and if it's blown, i'll pick up the parts then myself and pay them to do it

if there's any damage to the car (not sure if it's the head gasket 100% yet), then i'll also need them to resurface the head if possible.

[jfryer496]

Can someone host some pics for me? My stuff isn't working and I am trying to put an ad up for the Volks, PM me if you can hook a brotha up.

www.derosion.com/upload

there you go try that

[ultm8mind]

thanks and now this weeks episode of Epic Meal Time

http://www.youtube.com/watch?v=T8gDQWdlW6A

[LIKEG6]

I always used tinypic.com

[justnprsh07]

need a compression test and if it's blown, i'll pick up the parts then myself and pay them to do it

if there's any damage to the car (not sure if it's the head gasket 100% yet), then i'll also need them to resurface the head if possible.

I can run all the tests to see if its blown for u for free theyll prob charge u and keep it for a few days

[justnprsh07]

We got a few ppl meeting up and going to montgomery for importshowdown saturday night... So far we got about 10 ppl going, if anyone else wants to tag alone we will have tents and were grilling out so even if you dont have anything to run come hang out. Also have plenty of open seats if u dont want to drive

[willard]

I got someone else coming when and where are we meeting to head up there? Should I bring my tent also? its a big dome one.

[jfryer496]

i forgot about sunday! def gunna be there tho. whods got the address for the track??

[boosted347]

ahhhh shit this is sunday....i may make this actually a full weekend of drag strips yes please if you want a passenger on sunday jeff ill ride with also it liiiiives!!!!

[willard]

its saturday not sunday and I believe were going to meet at the walmart on 280 in phenix city so everyone knows where to go and probably going to leave at 2 pm. how does that sound to everyone thats going justin and I talked about this a couple hours ago

[boosted347]

its saturday not sunday and I believe were going to meet at the walmart on 280 in phenix city so everyone knows where to go and probably going to leave at 2 pm. how does that sound to everyone thats going justin and I talked about this a couple hours ago

i is sad its not on a sunday like normal

[jfryer496]

damn lol