I might stop by.Originally Posted by justnprsh07
I might stop by.
come on by i know me and luke will be there and i finally bought my cage today so in about a week ill be needing some help holding bars
[SIGPIC][/SIGPIC]
I will. We are like talking in two different threads, but what cage did you get? Jimmy and I have decided to do mine one weekend in Feb, he already ordered the piping. I still haven't turned it on since Nov.
ill help ya for sure
SLEEP, EAT, RACE
kendahls's cousins hatch turned out REALLY good i was actually impressed however im having casey grant paint my bike(s)
I have boo boos I need fixed and repaintedjus want iit to look halfway decent again, but I want someone that'll do a good job
i guess it all comes down to how much your willing to spend as to how good of a job youll get... you can look at bruses supra that i finally painted this weekend to see just what i can doI have boo boos I need fixed and repainted
[SIGPIC][/SIGPIC]
i got the s&w hell for the price it comes pre bent and notched cheaper than i can even buy all the pipe and plates that i want to do for a 10 point
[SIGPIC][/SIGPIC]
I looked at those, they are nice. I was going to buy one, but this came up with Jimmy so we are going to do it.
casey is good and i like him alot but dont get in a hurry bc hes gonna take his time and hes not gonna get in a hurry but it will be done right... he had my cousins 1000 for months but he does great work and does beautiful work i just know you and your gonna get in a hurrykendahls's cousins hatch turned out REALLY good i was actually impressed however im having casey grant paint my bike(s)
[SIGPIC][/SIGPIC]
i would to if i had someone willing to work out a deal on doing it for me but everyone wanted like 1500 plus for what i wanted so ill do it myself
[SIGPIC][/SIGPIC]
im not in a hurry, just pulled the motor and head off my bike so i can install a thin head gasket and arp studs..plus changing the swing arm and finishing up my nitrous install
anyone going to Steak N Shake tonight?! I wanna go!!
BOOST= THE REPLACEMENT FOR DISPLACEMENTBUILD VIDEO: http://www.youtube.com/watch?v=2WsDCLo8CDA
were going rain or shine... if its raining we will just all eat together inside
[SIGPIC][/SIGPIC]
I may come down. I got off work for ONCE before 3 and i've been bored all afternoon... I have to hit TGI Fridays first bc one of my friends is a bartender there, but after, i'm game. I may leave the car parked though. it's washed, and I don't like boost + fwd + rain.. .bad combo.
BOOST= THE REPLACEMENT FOR DISPLACEMENTBUILD VIDEO: http://www.youtube.com/watch?v=2WsDCLo8CDA
who alls going theres a few people in this town i dont like
im going, hope you like me man! lol
meet up time?
BOOST= THE REPLACEMENT FOR DISPLACEMENTBUILD VIDEO: http://www.youtube.com/watch?v=2WsDCLo8CDA
i dont think anyone that you dont get along with will be there actually im pretty sure of it and i belive 7 or 730
[SIGPIC][/SIGPIC]
ill swing by gotta meet teymur anyways, and plus going bowling tonight
alright well we will be there... anyone going to varsity thursday night or does anyone still go to that
[SIGPIC][/SIGPIC]
i'm down to go to that. are ya'll there at S&S? what's up for after?
BOOST= THE REPLACEMENT FOR DISPLACEMENTBUILD VIDEO: http://www.youtube.com/watch?v=2WsDCLo8CDA
Okay, clutch is slipping, SUCKS!!!! Time for a rebuild because a new one costs from $1700-2100. Why me!!!!!! Ughhh, oh well. In other news, I need to take my dash off on the ef hatch and change out the leaking damn heater core. More bullshit!!
Can anyone answer this, on my B16, I have a tri-y header. Well, when it breaks down to 2 tubes, there is an O2 sensor hole on one side. Will this only register those 2 cylinders? There is another bung for a 2nd on the test pipe, do I need to put both in or can I use one? I know I had asked Brooks when I thought I only had one bung, but now I have 2. Does it matter if I only put the one in the header? Lemme know peeps......
Working my ass off by the way is why I haven't been so active lately.
According to Taketomi, true VIP style tuning is limited to only 10 Nissan and Toyota models: Nissan President, Cima, Gloria, Cedric and Fuga; Toyota Celsior, Century, Aristo, Crown and Majesta.
I would put it in the test pipe, because like you said above the o2 will only register those two cylinders. Just put a plug in the bung in the header. I would rather have it reading all then just two or one, but either way it shouldn't matter. Is this obd1 or 2?
Last edited by kte324; 02-01-2011 at 11:21 PM.
The rain has got me in, I will meet you tomorrow. This weather sucks.
if its obd1 you dont need but one, if its obd 2 you dont half to run 2 but the check engine light will stay on.. you should just put it in the second one, if it wont reach or you need to run two it will be ok to run it in the first one bc all four cylinders should simply be the same so in theory they should all read almost identical
[SIGPIC][/SIGPIC]
i wish my muti lock up clutch i just bought for the bike was only 2k lol and put it in the first hole, thats how mine has been for months on my tri y header and im getting 36mpg
Ok, thanks guys. I know in theory they should all be the same, lol, but you know how that goes. I was thinking of just splicing it also and "t'ing" it off to to the two plugs but putting it in the test pipe. But I see Sean isn't really having issues, so I might even just try to run one. I'm thinking it's obd0, but not sure. I gotta do an obd1 or 2 conversion relatively soon, but for now I just wanted to get it on the road because the evo is down, lol.
How long should it take to pull this dash down to get to the heater core? Brooks, how many times you took your dash down? Lemme know.
According to Taketomi, true VIP style tuning is limited to only 10 Nissan and Toyota models: Nissan President, Cima, Gloria, Cedric and Fuga; Toyota Celsior, Century, Aristo, Crown and Majesta.
its hot bad it will take longer to swap out the core than it will to take the dash out
[SIGPIC][/SIGPIC]
Oh ok.
According to Taketomi, true VIP style tuning is limited to only 10 Nissan and Toyota models: Nissan President, Cima, Gloria, Cedric and Fuga; Toyota Celsior, Century, Aristo, Crown and Majesta.
Some mother fucker hit my car today WTF im fucking pissed dented my fender in
SLEEP, EAT, RACE
lol damn that sucks!
did they run... if not insurance check cha ching
[SIGPIC][/SIGPIC]
I took out my first ef's dash and it was easy but the heater core was somewhat of a pain. That was before I really knew what I was doing though.
Btw the teg is up for sale cause I'm buying a spaceship.
spaceship.. why you want a ep3
[SIGPIC][/SIGPIC]
Lol I would like one but I'm not getting one this time.
minivan?
Once the teg sells you shall see my friend
whenever anyone says the word "spaceship" in relation to cars... i always think: "new civic that looks like a miniaturized 1st gen dodge stratus."
Getting one of those?
-jonathan
[/URL]
Jesus Christ is my Savior
I was thinking, this right here.whenever anyone says the word "spaceship" in relation to cars... i always think: "new civic that looks like a miniaturized 1st gen dodge stratus."
Getting one of those?
-jonathan
Posting Permissions
Reply With Quote
