<<<Official Columbus, GA Discussion Thread>>>

[boosted347]

I'm coming for a camera car... what day? I may wait to take my car back to atl one day next week

Itll be saturday is my guess

[kr3w108]

I'm coming for a camera car... what day? I may wait to take my car back to atl one day next week

Lol no need . I'll have the camera pointed at the back of my car

[justnprsh07]

Why u not gonna be able to vID any of the races with it pointed back there lol

[boosted347]

Why u not gonna be able to vID any of the races with it pointed back there lol

but

[OneSlowGTO]

Saturday looks dry. JP you still looking for another turbo?

[kr3w108]

Why u not gonna be able to vID any of the races with it pointed back there lol

lol that way i can see who is behind me

[urcarislower]

lol that way i can see who is behind me

aint many people gonna be behind you if yer spinning like that vid you got post on here lmao

[kr3w108]

aint many people gonna be behind you if yer spinning like that vid you got post on here lmao

lol id say i hooked pretty decent... 2nd gear brake boosting from a 40 roll. way better than when i have my bobos on... im using 225 50 15 et streets.

[boosted347]

aint many people gonna be behind you if yer spinning like that vid you got post on here lmao

His car pretty much dead hooks from 40 roll even when he brake boosts :confused:

[urcarislower]

lol id say i hooked pretty decent... 2nd gear brake boosting from a 40 roll. way better than when i have my bobos on... im using 225 50 15 et streets.

Any spinning to me is a loss of forward motion just not good for business lol. But really i like yer car, cant wait to get back even though i wont be able to do anything till i get retuned now lol.

[kr3w108]

Any spinning to me is a loss of forward motion just not good for business lol. But really i like yer car, cant wait to get back even though i wont be able to do anything till i get retuned now lol.

I agree totally , i really need some slicks to hook completly . but for not these radials will do. fwd FTL when i turn the boost up i will deff need some other tires to ride on. these radials are not gonnna cut it.... i should be going back for my high boost tune soon .

[OneSlowGTO]

225's are those skinneys lol

[boosted347]

225's are those skinneys lol

Hahahaha thats pretty damn funny i wont lie...but on a serious (non ass hole note) who all in columbus have you run justin...and have you even used giggle gas?

[OneSlowGTO]

No giggle gas yet i think i started the short list in the other thread.

[urcarislower]

His car pretty much dead hooks from 40 roll even when he brake boosts :confused:

I watched a video of it and it was either spinning which isnt dead hooking or clutch slip, still confused?

[boosted347]

I watched a video of it and it was either spinning which isnt dead hooking or clutch slip, still confused?

I was in the car...it barks the tires shifting into 3rd then no more spinning. Im not confused at all

[just a honda]

He's saying when he mats it in second and it goes to red line then he shifts . All of second it is spinning

[ultm8mind]

Well that would put it around the 300 range.... worst part is sanding it all and taping up everything. Most ppl spray paint them to a close color or black to save that money

Interior is not in car, would there still be a need to tape?

[ultm8mind]

you can race that Aston Martin I've seen running around

[justnprsh07]

Saturday looks dry. JP you still looking for another turbo?

Picking up another one today but what u got?

[justnprsh07]

Hahahaha thats pretty damn funny i wont lie...but on a serious (non ass hole note) who all in columbus have you run justin...and have you even used giggle gas?

Who needs that's stuff????

Interior is not in car, would there still be a need to tape?

NA u don't half to if your fine with the overspray

lol id say i hooked pretty decent... 2nd gear brake boosting from a 40 roll. way better than when i have my bobos on... im using 225 50 15 et streets.

If your hooking those tires at all in 2nd u got some issues that need yo be tended to.... shouldn't be bookings to about 60ish plus. I couldn't dead hook 26x10.50s until 80+ and they would still break loose up top but your car weighs a good 800lbs or so more so that will help some

Any spinning to me is a loss of forward motion just not good for business lol. But really i like yer car, cant wait to get back even though i wont be able to do anything till i get retuned now lol.

Yea u don't spin..... u drive a stock s2k with an eBay turbo kit....

[OneSlowGTO]

Direct port guy with his nitrous jokes lol jk jk

[urcarislower]

Yep ebay... and i cant help i have forged internals from the factory that stay together better than yer "built" ones...

[justnprsh07]

lol^^^shit happens when you push the limits

[justnprsh07]

Direct port guy with his nitrous jokes lol jk jk

my car needs it...if it wasnt there then everyone would jump 2 cars just off the line every time now if i can just get the car to run right so i can use it

[urcarislower]

lol^^^shit happens when you push the limits

you right about that im not pushing the limits, theres quite a few stock block s2000's out there making over 700whp. but i cant run slicks so no need in that much powa yo.. plus i like to keep it mad jdm tight hella not flush yo

[OneSlowGTO]

I hear ya i have the most impossible rear end to hook in the muscle car world. now if i could one get my nitrous to work right lol.

[justnprsh07]

i belive evil goats gto was running well into 10s on radials and stock rear end... s2k be lucky to get 11s without breaking a diff

i dont remember gladneys times but his would move and i belive it was a stock rear end??? not sure so ill ask but i know gtos are bad about breaking under some launches

[boosted347]

i belive evil goats gto was running well into 10s on radials and stock rear end... s2k be lucky to get 11s without breaking a diff

i dont remember gladneys times but his would move and i belive it was a stock rear end??? not sure so ill ask but i know gtos are bad about breaking under some launches

y

evilgoat went 10.60s but it was on slicks not radials...but it was stock rear end with arp hardware holding the halfshafts to the pumpkin.

[justnprsh07]

thats moving pretty good for a mostly stock car.... i think it had alot to do with the driver too lol

[boosted347]

thats moving pretty good for a mostly stock car.... i think it had alot to do with the driver too lol

Yea it was a cam only car on a 150-175 shot and he is a fuckin beast of a driver too that def helps lol but i wont be able to make it out this weekend, my grandpa is in the hospital but lisle will have my cameras so if anything goes down i beg of you to take videos lol

[justnprsh07]

man i was wanting to run that mustang why i was on crutches so i could size everyone up

[boosted347]

man i was wanting to run that mustang why i was on crutches so i could size everyone up

Ha yea...shit always comes up as usual but family is always first so gotta handle that...i know ill be out and about the week or march 12-18th so we can play then

[justnprsh07]

i wanted to run while my car is slow... i should be running good by then and maybe urcarislower will be out and running good to so we can set something up and have some fun

[boosted347]

i wanted to run while my car is slow... i should be running good by then and maybe urcarislower will be out and running good to so we can set something up and have some fun

Ha im down regardless, nothing wrong with losing, there is always someone faster out there anyways

[justnprsh07]

So true.... prob gonna be to cold for me sat.suppose to to be in the 30s :/

[boosted347]

So true.... prob gonna be to cold for me sat.suppose to to be in the 30s :/

Ah lisle wont be happy about that lol ill be hanging around just not gonna be out may try and drop the motor in the 240 this weekend gotta put in the midplate and fab a trans mount then the easy stuff lol should be ready to play sometime in may/early july

Also going off of what zosick proposed in the KF, we should try and set something up to determine the fastest in columbus...just thinking out loud though

[just a honda]

Glandey had drag bags that how he didn't break the gto from what I heard high 6's

[boosted347]

Glandey had drag bags that how he didn't break the gto from what I heard high 6's

So about the same as evilgoats...think his went mid 6s on the big shot

[ultm8mind]

SO, who can paint that wants to help me strip and primer my 89 hatch?