im looking for a cheap fourwheeler to pull my bike to the pits and back up the return road after passes looking to spend under 2k let me know if you have something or know someone
im looking for a cheap fourwheeler to pull my bike to the pits and back up the return road after passes looking to spend under 2k let me know if you have something or know someone
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
lookin for some d series turbo parts like 440cc injectors, oil return line, non ebay wastegate/bov, 3bar map. i have some 4x100 fusion re'6 wheels and or a garrett turbo to trade or these
i got a haro f2 bmx bike all original, new front tire and tubes in good shape asking 200$ obo need gone asap
Looking to buy some camshafts....b series. Hit me up with what is available.,
I got a few sets of GSR, lmk. 706-536-6506Originally Posted by Fox351
Also I B16/GSR springs and crower retainers.
fs/ft............a obo
:skunk 2 shift knob-40$
drivers and pass LS blue seats
back top parts the blue color LS seats
brand new yakima bike tray with end cap
94-97 integra back bumper in good shape
ls shift knob
ls ebay headers
ls silver control arms(needs bushings)
Nuespeed lowering springs(2 inch) in good shape
stock LS springs
passenger side civic EG window
ebay type r honda emblems
passenger side inner and outer tie rod for eg/dc
oem ls brake rotors
oem ls intake ( came off 94 ls)
oem LS injectors
RC injector clips brand new
DC 4 door power mirrors in perfect shape
condensor fans from 2 egs
ls guage cluster with 140k
everything is obo and just hit me up at 706 577 3642 and i might have other stuff just let me know have a full dc parts car
got b16 usdm and jdm
I'm in need of some fabrication work on my s13. Nothing incredibly fancy, but necessary. I need a "bash bar" (aka: impact bar) built to act as a bumper support and also to protect my intercooler. It needs to be removable, and mount to the factory positions.
I'd like something similar if not a little bit fancier than this:
Parish, I'm lookin at you!
-jonathan
[/URL]
Jesus Christ is my Savior
your yakima rack fit a eg?
SLEEP, EAT, RACE
I'm in need of some fabrication work on my s13. Nothing incredibly fancy, but necessary. I need a "bash bar" (aka: impact bar) built to act as a bumper support and also to protect my intercooler. It needs to be removable, and mount to the factory positions.
I'd like something similar if not a little bit fancier than this:
Parish, I'm lookin at you!
-jonathan
I can handle that...swing by or call mee
[SIGPIC][/SIGPIC]
I'm in need of some fabrication work on my s13. Nothing incredibly fancy, but necessary. I need a "bash bar" (aka: impact bar) built to act as a bumper support and also to protect my intercooler. It needs to be removable, and mount to the factory positions.
I'd like something similar if not a little bit fancier than this:
Parish, I'm lookin at you!
-jonathan
who puts impact bars on cars that dont have them
My 95 S/C LS- VTECH hatch is up for sale $7500 with all my extra honda parts also to much to list or trade for a extended cab or four door truck. if you want info on the car pm me only if your serious dont waste my time.
Don't waste my time if the title is not in your name I'm not dealing with your parents thanks
Last edited by willard; 10-16-2011 at 11:13 AM. Reason: price lowered to move
SLEEP, EAT, RACE
WHAT?!?
But, you just got it 'charged!
Just call me DAD!
Yea finished the car not much else I wanted to do to it and I'm starting to get my girls into dirt bike riding and been out camping allot can't fit to much in my hatch and cant pull a trailer with it.
SLEEP, EAT, RACE
Who has that accord I looked at a month ago? I might have a deal for you for the car callme 727-237-3982
SLEEP, EAT, RACE
Any one looking for some del sol seats? got some in not so good condition $50 for the pair. Will send pics
93 cx-project
12 Mazdaspeed 3-daily
07 R6- toy
I'm curious to know if anyone has two 215/40/18 or 225/35/18s lying around?
I'd be interested in picking them up if the tread is decent.
-jonathan
Jesus Christ is my Savior
i need some 15' wheels. preferrably with decent tires on them. i have my fusion re6's up for trade plus steelies plus a garrett turbo for some.
got a 7x14 enclosed v nose trailer im selling for 4k if your needing a trailer
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
i got some random stuff:
RC injector clips brand new
ebay type r shift boot
92-95 civic dx ecu
make me some o ffers 706 5773642
Del sol seats $40 if anyone is interested. Not in the best of condition but still in working order.
678-588-9045 lmk if you wanna see pics
93 cx-project
12 Mazdaspeed 3-daily
07 R6- toy
Del sol seats $40 if anyone is interested. Not in the best of condition but still in working order.
678-588-9045 lmk if you wanna see pics
93 cx-project
12 Mazdaspeed 3-daily
07 R6- toy
just adding this here for the locals... can be seen at columbus custom exhaust... 3386 victory dr...
Make: honda
Model: civic ex
Year: 1997
Mileage: 149,xxx
Options: power everything, sunroof, ***NO A/C***
Mods: exhaust and short ram intake
Engine:F20B swap from a siR accord euro spec (so there are no vin codes)
VIN#: see pics
Condition: 7/10
Location: columbus ga 31903... the car is not currently registered, so i will not drive to meet you, you will need to come to me...
PRICE: $4500 obo... low ballers need not apply... has new rims on it. they are 15" option racing w/ red stripe... mint condition...
this is a clean swap, no mechanical problems at all... no grinds, no smoke... the interior is clean, no tears, not perfect, but good shape for 150k miles... the exterior has some dings around the car and two small dents where the wing comes down to the quarter panels.... it doesnt hit, but this is there location... it needs headlights and the bumpers could stand to be painted....
the swap has a chipped p06 ecu in it... it has a CEL on for IAT, it looks like there are two of them on the car and i just haven't figured out what the correction is... the car runs perfect... it has poly mounts in it, i think they are hasport??? it has a slight vibration in it at idle due to this...
****TRADES****
must have title in hand and in your name... if its not, please have the true car owner contact me please...
must be complete and needs no work... i dont need a project... must have a/c and i prefer an automatic... prefer to swap for another honda, 2 dr or 4 dr... must be an OBD2 car... i dont want anything older... basically i am willing to trade my modded, swapped car for your bone stock clean newer model car of equal value... so if have a doubt as to what your car is worth, check NADA and then decide if it meets the criteria... if it has isolated body work, i am willing to take that into consideration dependant on the car... i dont mind fixing a fender bender, but im not painting a whole car...
****cash price $4500obo****
****NO CALLS OR TEXTS AFTER 10PM OR BEFORE 9AM****
706-681-5136
JUST SEND ME PICS OF YOUR CAR W/ SPECS, YEAR MAKE MODEL ENGINE TRANS...
i will delete this thread if a deal is made on the car so please dont ask if i still have it... its frustrating...
this is the dent on the quarter panel... there are matching ones on both sides...
this is the rear bumper...
this is the worst of the dings on the car...
Well i hate to do it but its time to move on to better things... My loss is your gain. Everything is best offer but im not selling because im in need in money simply because im tired of dumping so much money into it.
If there is anything you want but think Price is to high pm text or call me 7065877278 anytime... i also love to trade for about anything not just car related things... very easy to work with
Engine:
Darton sleeved 88mm h22a block with kaizenspeed balance shaft eliminator "needs linebore" $400
2 crower rods $50 each
H22 50mm crank never been turned in great condition $150
h22 55mm crank never turned polished and ready to go $150
wiseco 88mm 9.5:1 used $200
h22 port matched head w/ crower springs and retainers & fresh valve job $500
skunk2 pro1 cams $450 maybe 20miles
Turbo Setup:
Precision 6765 t4 .96 ar only 100miles $700
Custom 304 stainless forward facing manifold and down pipe $550
Custom 304 stainless ram manifold $500
Precision 46mm wastegate $175
Precision 1000hp l2a setup $750 includes precision 1000hp l2a ic, 3gal water tank, pump, and lines
3in piping and couplers with zex fogger welded in $100
Golden eagle intake manifold ported with vacuum block $450
Str 74mm tb $100
Turbonetics Raptor Bov $150
Fuel:
Dual bosh setup $600 includes 2 bosh 044s, filters, -10 feed and -8return
Mallory fpr $50
Bosh 1600cc injectors w/ fjo injector driver $300
Hondata s300 in p28 w/ boost by gear $500
Aem 5bar map sensor $50
Drivetrain:
h22 trans w/ saenz straight cutt gear set freshly redone ratios are 3.071 1st, 2.153 2nd, 1.667 3rd, 1.30 4th and 1.05 5th brand new syncrotech carbon syncros and springs, and quafe lsd $2500
DSS 5.9 axles and Hubs with DSS half shaft $800
competition twin disc with extra disc $500
Weld Magnum 15x10 wheels $500
Mickey thompson 26x10.5x15 radial/slicks $175 hold air without tubes and maybe 50miles on them
Lenso skinnies with mt fronts $400
Skunk 2 upper control arms $40
Skunk 2 lower control arms $40
skunk 2 arm bar $40
Skunk 2 frnt sway bar $50
Skunk 2 upper strut bar $40
Itr rear sway bar $30
Drilled and slotted frnt rotars $20
Rear disc conversion with cables and drilled and slotted rotars $150
Custom cantilever rear suspension setup $400 something most of you have never seen and it works amazingly
Misc:
Misimoto radiator with spearco hoses, fan, and catch can $225
Valve cover and catch can setup $250
Kirkey drag racing seat $75
Autometer Boost guage $25
Autometer Oil Pressure guage $25
Brand new alternator $50
Dizzy $75
MSD wires $20
Custom Wiring harness to tuck all wires $75
Shift cables only 100 miles since new $75
NOS Pro fogger direct port setup 125-250 shot includes everything $450
EG carbon hood $200
EG Shell with carbon fiber roof, very very light, 10point mild steel cage and anything that dont sell above... make offer
Omni Power Clutch master cylinder $75 new
2 MSD SCI boxs $75 each
MSD sci coil $40
Haltech boost controller $100
STR Fuel rail $40
I will add more when i get home and see what i missed... if you need anything pm text or call, this was a complete car and i havnt sold anything yet
I will provide detailed pictures for anything needed
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[SIGPIC][/SIGPIC]
Wish I had some money to blow I would buy those sway bars, strut bars, front and rear rotors and maybe done other stuff. Hmmmmmm
Got it.
Last edited by kte324; 10-19-2011 at 06:03 PM.
you would if you would spend it in the right places put that foot down and pick what you want save get it then pick the next thing
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
WTB: WIFE TO CREEP WITH!
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
helping my buddy sell his bike
13,000 buys it too much to list, nothing cheap on setup, absolute mint condition, well maintained. cannot build for close to asking price!!! Never title so the new owner will be the first owner bought new off showroom floor for a drag bike never seen the street/rain period! You can eat anywhere off this bike!
adams strongarm swingarm
flatlink
dme flat oil pan
penske shock
cut forks
mps spyder
nos mini
mps air (auto capable)
brock sidewinder
ballistic 12 cell battery
guhl ecu
CARROZZERIA rims
Engine is a 3 mil, built by porttech.com full port/polished head plus 1mm intake valves, 395/365 megacycle cams, robinson first gear......fresh less than 20 passes, 7 1/8th passes on nitrous.
Engine made 220hp with brocks pipe and Mrx01 on Cooper performance dyno, mapped by Walter Sprout and 311hp on spray.
Bike goes 1.28 60ft's and low 5's in the 1/8th low 8's in the 1/4 with me 170lbs on it and 1.1 60fts high 4's and high 7's in the 1/4 mile on spray. Time slips are availaible to a serious buyer!
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
Anyone got a single or dual 12" sub box? Ported or sealed doesn't matter.
willard
[SIGPIC][/SIGPIC]
told him ill make him one but he doesnt want it lol
SLEEP, EAT, RACE
FOR SALE OR TRADE 1975 dodge dart, go check it out in the dodge sale thread please!!
Ive got 2 duals sittin in the garage....let me know
I'm just going cheap for right now until I get the speakers I want. I got some free speakers and an amp so I'm trying them out but it's looking like I need another amp right now.
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
Get a life.
i got one you need one, instead of sititng in the house all the time taking shit from that women you work all that overtime and always hollaring you broke
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
Maybe I should move in with my mom then I could be "ballin" too.
if you want a box, let me know...it will be cheap. just make an offer
Posting Permissions
