Its a K

[tuyen]

something i been working on, many parts are on order, can wait to drop the new motor in. what yall think....good comment thank you bad comment dont really care. it my project lol

finally new wheels has arrived

[RsonGt3's]

Sweet gl!

[andrewu]

Nice, final product should come out nice.

[Western.]

Nice invisible car in the third picture!!!Its too bad they haven't figured out how to make the rest of it invisible..........



But seriously, nice civic, and good luck with the future upgrades. Keep us updated.

[tuyen]

Hope so, kswap isn't cheap I'm scared to add up the cost on the project. Won't be hopefully I can throw it in the paint shop this month...

[1civic]

The extra's are what add up, but It can be done under 3K...

[tuyen]

I don't want to do any short cut on this project. Just order a set of ccw classic, and chase bay cm1 mill spec engine harness both of those item are 4000ish already

[tuyen]

Nice invisible car in the third picture!!!Its too bad they haven't figured out how to make the rest of it invisible..........



But seriously, nice civic, and good luck with the future upgrades. Keep us updated.

Yep sure is

[1civic]

I don't want to do any short cut on this project. Just order a set of ccw classic, and chase bay cm1 mill spec engine harness both of those item are 4000ish already

See that is where the money is..lol

Good start though..

[tuyen]

See that is where the money is..lol

Good start though..

It like measure twice cut once

[EJ_Allmota]

nice shit.. should be great..

[RL...]

cool stuff

[1civic]

It like measure twice cut once

If that was true then you would be building a motor, never works out that way..

It's more like want and need...

[tuyen]

If that was true then you would be building a motor, never works out that way..

It's more like want and need...

Have thought about it building the motor internal but no need not for racing. So just the stuff that keep the motor running healthy.

[tuyen]

Any body knows a good shop that can do body work and paint good. Looking to spend about 3k on paint and body work.

[C230K]

What motor was in the car before?

[tuyen]

What motor was in the car before?

D16Y7

[Dylan]

Damn, looks like a nice build. Keep us updated

[1civic]

Any body knows a good shop that can do body work and paint good. Looking to spend about 3k on paint and body work.

Finish line does good work, they are by six flags off Thornton rd.

As for the build, I would rebuild so everything is fresh.. Then you know for sure, remember measure twice, cut once!!

[tuyen]

Finish line does good work, they are by six flags off Thornton rd.

As for the build, I would rebuild so everything is fresh.. Then you know for sure, remember measure twice, cut once!!

New clutch and all gasket seal and all the necessary things since the motor is still out of the car.
kool ima try and google them out. I had miracle glow as a choice but don't really how good they are with the price that I want to spend on the body and paint.

[spank]

I don't want to do any short cut on this project. Just order a set of ccw classic, and chase bay cm1 mill spec engine harness both of those item are 4000ish already

nice build

[AV8ter]

$4000 for wheels and an unneeded engine wire harness plug. Man, unoriginality is expensive.

[Sinfix_15]

good start to a "project". Car looks like it just left the showroom.

[Sinfix_15]

$4000 for wheels and an unneeded engine wire harness plug. Man, unoriginality is expensive.

if you want originality, ride a donkey to work. Everything with a car has already been done.

[Genji-Sama]

This is gonna be good

[1civic]

New clutch and all gasket seal and all the necessary things since the motor is still out of the car.
kool ima try and google them out. I had miracle glow as a choice but don't really how good they are with the price that I want to spend on the body and paint.

Finishline has done 6 cars for me, only 1 did they do bodywork, but turned out good.. Normally do my own bodywork and prep!

Only other place in which I know of the quality is Hardy Chevrolet, the painter Ken is a long time friend, but be prepared to spend 2-3k since the work is top notch!!

Nether will give you problems..


Finishline paint and collision
500 Thornton Road # 11, Lithia Springs, GA. 30122
(770) 739-8311.

Hardy Chevrolet
1249 Charles Hardy parkway Dallas, GA 30157
(770) 445-9411

[tuyen]

good start to a "project". Car looks like it just left the showroom.

Thanks bro

[DustnU]

YES!!!!!! I love a "K" and in a hatch is the ONLY way to go..... Good luck bro

[Franco Tirador]

seems like you are on the right path, if i were you i would spend the money you are about to spend on the body in internal engine stuff, from pics the body looks very decent.

Edit: yeah, you would need a clean body to rock some ccw's , good start

[Drummerboy]

I mean, K's a cool, but You'll get lost in the crowd with the hundreds of other K civics. Just how it is.

Oh, and F UR K.

[speedminded]

Its a K

Error 404. K not found.

[silverDA]

[DB4LYFE ™]

nice! good luck!

~DB4LYFE

[i4_garage]

[bondo]

please keep us updated

[JDMEK18]

looks good bro.. Now the "K" in Civic EK will stand for K swapped lol

[tuyen]

The stock d serie motor will be out pretty soon. Still waiting on more parts to be in. Anybody know where I can rent an engine hoist...

[georgieboi]

All that money your putting in that hatch.... 200 for a hoist won't hurt ya bud lol

[Sammich]

if you want originality, ride a donkey to work. Everything with a car has already been done.

actually there was this one guy..............

[Sammich]

All that money your putting in that hatch.... 200 for a hoist won't hurt ya bud lol

who needs a hoist when you bench five hunnid