This is just a post of Daniel's (Whitevomr) build up here at American Radio
Awe she so pretty with those new wheels
Daniel brought all of his own equipment, wiring, etc... This was sort of a budget build.
In the bay
Beginning tear down
Before
Original speakers
Stripped
Made baffles
Driver’s side front door done
Passenger side door
Passenger side front door done
Stock tweeter and bracket
New tweeter and old tweeter
Ran the power wires for the audio and secondary battery that will power the air ride compressors
Fusing
Creeper Scott
Ripping out the C-pillars and seats
Removed the stock sub
The interior was then placed on the car for garage space issues. We placed microfibers underneath it all so there wouldn’t be any scratches
Old vs. New I wonder what that 10W7 will sound like in the rear deck…. Best if we don’t try haha
Amplifier wiring
Amp bypassed, crimp caps were placed for speaker recognition.
Radio install
Peek-a-boo John
This is what happens when Dan (Whitevomr) get’s pulled over for speeding and decides to punch his head unit
Handsfree Mic installed
Radio is in
Getting jacked up
The old JIC Magics
JIC coils vs. UAS on Bilsteins
The coils are coming out
Bags are going in
Neither strut had bolts for the brake lines or were missing bolts so we added new ones
AccuAir Manifold
Wrapped up the tank to keep it from scratching
Dakota digital pressure meter
What the heck is a LEET?
Discussing trunk options
Trunk build
Sealing up the box
Rounding off the corners to make them smoother
Made a base plate for the tank to sit on
One custom port coming up
Stinger battery in
Everything rough carpeted
Buttoning it all up
Mounted the W7
All the way up
Down
More down
All the way down
Back all the way up
Down
More down
All the way down
Slammed
Trunk finalized
Dan took the car to get spacers put on the car so now it sits like this
Short video of the car
The car can go lower but until he addresses some camber issues we are setting it at this level for all the way down. Hope you enjoy it as much as we did installing it man.