If you never liked Mustangs..this might change your mind

[OTG Signs]

3M DI-NOC dry carbon vinyl. DI-NOC was the original manufacturer of the faux wood paneling on the cars starting in the 40's then 3M bought them out. The faux carbon fiber is amazing stuff...

http://www.carbonfibergear.com/direc...on-fiber-vinyl

I have some vinyl here that I think looks better than 3M. It's also the 3D-look. The only downside is it has to be bought in rolls: 60" wide x 25/50 yards and it's NOT cheap.

Only picture I could find on the internets:

[Mantooth]

Where did you seem for that much? Most I ever saw em for was like 5K. There was an enzo desk for 10K i saw awhile back.

http://www.racechairs.com/category_s/32.htm

[speedminded]

Where did you seem for that much? Most I ever saw em for was like 5K. There was an enzo desk for 10K i saw awhile back.

Lamborghini Superleggera Grey - $15k
http://www.racechairs.com/superleggera_p/rc141.htm

Lamborghini LP640 Race - $10k
http://www.racechairs.com/LP640_p/rc145.htm

Ferrari Challenge Leather Race $10k
http://www.racechairs.com/Challenge_Race_p/rc104.htm

There are a lot more in the $4-8k range than the $10k+ though!

[speedminded]

I have some vinyl here that I think looks better than 3M. It's also the 3D-look. The only downside is it has to be bought in rolls: 60" wide x 25/50 yards and it's NOT cheap.

Only picture I could find on the internets:

How much for 40 sq. ft? (4' x 10')

*EDIT*
Wait it comes in 5'-0" rolls?! That's weird. I'd have to remeasure to see if I could do it with under 10 feet or how much would 5' x 10' cost?

[FoolsDrifFWD]

[down_shift]

why did the thread become an argument about retarded vinyl wrapping and office chairs?

[speedminded]

why did the thread become an argument about retarded vinyl wrapping and office chairs?

Because you can only talk so long about a Mustang before the topic leads to more interesting things...like clipping toe nails and watching paint dry.

[LaoboiLB]

that thing is sexy always been a mustangs fan

[OTG Signs]

How much for 40 sq. ft? (4' x 10')

*EDIT*
Wait it comes in 5'-0" rolls?! That's weird. I'd have to remeasure to see if I could do it with under 10 feet or how much would 5' x 10' cost?

We would have to order a roll and rolls are over $2,000. So, until we get an order for more than half of it, it's just not viable for us to order it for small cuts.

[speedminded]

We would have to order a roll and rolls are over $2,000. So, until we get an order for more than half of it, it's just not viable for us to order it for small cuts.

ahh nm, I thought you said you had a roll.

[Mantooth]

Because you can only talk so long about a Mustang before the topic leads to more interesting things...like clipping toe nails and watching paint dry.

Exactly.

[speedminded]

Exactly.

There's only a few Mustangs that truly have my attention and that's those from the early 90's Group A.

[OTG Signs]

ahh nm, I thought you said you had a roll.

I have a small sample of it. Hardly enough for anything.