Where is AFSil80 at? haha, he should post up in here.
JJSPEC Racing
"He who judges a book by its cover will soon be staring at taillights."
some 315/35/r17 nitto i had on the wifes car back in the day![]()
I check sluts off my list like a maintnence man
I drive a low is3 just so it gives me a reason to drive super slow on these rough ga roads.
315s don't just go under a mustang without a fender roll correct?... I just don't know ha
^ nah when it was on pavement they go right up in there with about1/4 inch from scrub the inside wall.Well thats how it was on hers,10inch wide rim in the back and 9 inch in the front.
I check sluts off my list like a maintnence man
I drive a low is3 just so it gives me a reason to drive super slow on these rough ga roads.
My car on 17x10.5's. 315/35/17 BFG T/A KD's
Stock 245 vs 315
Not my car but pretty sick.
![]()
225 on 18 x 7.5
![]()
Holy crapshit at those 345's!!![]()
My car with 285s
![]()
My rear 20x10 with 285/30/20
![]()
285/35
![]()
Stance kids/hardparkers = hipsters of the car community. Trend fags that were all up on some JDM shit 4 years ago like it was a 21 year old virgin with 38dd's...they want you to know they're cool, but don't wanna have to tell you, hence the attitude. Posers like none other, I swear.
Fronts...255/40/17, 9" wide wheel.
Rears...275/35/18, 9" wide wheel.
This pic was taken before my alignment, hence why the top of the tire is tucking.
Now some of you may be asking...why stuff so much damn rubber under there, if you ain't making shit tons of power?
Well, your brakes are only as good as your contact patch, and I'll be damned if there's a 215 that will keep these sumbitches from locking down...
Better late than never, right?
-91 240SX -- CA18 Power...SOLD, now terrorizing the streets of Alabama
I'm not on here nearly as much as I used to be, but this is easily one of the most bonerific threads I've seen in awhile. Glad to see there are in fact some people on here with the same taste as me. No pics since the tires, but on my WRX I'm running 245s on a 17x8 wheel and it looks mean (obviously can't hold a candle to some of these rwd cars though).
31x10.5 on a 15x8 rim.
![]()
1995 Sc470
They can also narrow factory wheels to 17x5. This guy narrowed stock Mach 1 wheels and widened the rears from 8" to 10.5" http://www.weldcraftwheels.com/
He said its $250 per wheel
![]()
Last edited by DSGMach1; 01-21-2010 at 10:45 AM.
you all should post up hp numbers with these tire sizes.. because i know that 38% of them dont make over 300hp...lol
hp numbers in the sig
Hence why I made a point of saying that my tire sizes are justified by my brake setup. I don't have ABS like most of the guys that have posted in this thread, so I gotta have grip up front, considering that my STOCK brakes were locking down with a 225 up front.
I have no idea what my car was making on #'s though...it had an HKS GT2540R with bigger injectors and a ROM tune. Probably 250'ish on a good day. I'm done fooling with bottom mount T2small setups, so take that however you will...
-91 240SX -- CA18 Power...SOLD, now terrorizing the streets of Alabama
My 315's are handling about 430 HP at the crank...
I only have high-flow mufflers and K&N Filter though.
![]()