2009 Mansory Cyrus

[YoTa_BoX]

A modified Aston Martin DB9 or DBS, the Cyrus has a new thick-weave carbon fibre body from Mansory. It might be the answer for someone wanting to upgrade their current Aston to mimic the One-77 supercar which the Cyrus takes obvious cues from. Almost every panel was replaced on the car except areas like the rear fender where the carbon fiber was glued in place.

Further refinements extend to the cabin which can be fully re trimmed. Again, new carbon fiber components were the theme for the dash board, steering wheel, center console and door panels.

The complete car comes at a price of €380,000 on top of the donor car.

Press Release
Mansory Cyrus – Spectacular construction based on the Aston Martin DB9 or DBS. Perfect processing and an elaborate technology are the hallmarks of this masculine aerodynamic power pack. A coilover suspension provides the best road holding and emphasises the striking rims in XXL.

The refinement is perfected by an exclusive interior programme. Haute Couture on wheels Tailor-made processing and perfect surfaces confirm the superb quality of the MANSORY designer outfit.

The CYRUS aerodynamics components are made of extremely light „prepreg autoclav carbon“ and do not only include wing extensions for the front and back, but also side skirt attachments and linings.

At the front axle, a newly designed front skirt with enlarged air inlets provides the optimal ventilation for the twelve-cylinder aggregate.

The CYRUS front is visually enhanced with the newly designed carbon bonnet. With its two slotted “power domes” additional fresh air is directed to the front motor.

Also at the tail, the refining engineers have invented something extraordinary in order to perfect the visual appearance of the Aston Martin.
The newly designed rear skirt with the integrated diffuser emphasizes the superior look and provides space for four stainless steel end pipes of the sonorous sport exhaust system.

Wheels
The optimal road grip is provided by the 9x20 and 10,5x21 inch rims in combination with Dunlop Sport Maxx tyres measuring 255/30ZR20 at the front and 295/25ZR21 at the back. The design of the ultra-light forged wheel thereby unites sportiness and elegance and perfectly fills out the wheel houses. In addition, an optimally adjusted coilover suspension lowers the centre of gravity of this noble sports car and renders perfect road holding characteristics.

Interior
The CYRUS driver will take his seat in a elaborately refined interior which is nothing short of the exterior. The entire modification includes pedals and foot rests made of aluminium as well as exquisite door sills and head rests with embroidered CYRUS logos.

MANSORY enhances the interior with a set of tailor-made carbon parts for the dash board and centre console. Generally, the noble interior is only lined with best quality materials.
Decoration stitches by expert hand on the dash board and the seats render visual high-lights and perfect the significantly beautiful overall impression of the complete leather equipment.

The ergonomically re-designed steering wheel
with airbag lies especially well in the hand.

[bigdom]

damn man. looks nice. i love the interior but the exterior would look better with less carbon exposed imo.

[cjhutch]

Too much carbon fiber for me. I don't like this at all. Then on top of that they charge you $500,000 on top of the price of the car and then GLUED the rear fenders on.

[EJ25RUN]

It doesn't look like a proper Aston.

It looks like another car overcome with distasteful tuner modifications.

Everything Mansory has made thus far looks horrible.

[G.C]

i like zebras.

[Drummerboy]

I must be a ricer at heart, but I absolutely love it! If I had an extra $500k and an Aston laying around, I would deffinitely do this.

[Franco Tirador]

nice find

[VooDooXII]

Too much.

I don't really like much of Mansory's work except for the Stallone (599 GTB Fiorano), the Renovatio (Mercedes SLR), and the Linea Vincero (Veyron)...even though the last one looks just like their Pur Sang edition.

Masory just goes overboard.

[bdydrpdmazda]

I like the interior but i feel that carbon fiber body panels should be painted.

[RUFFIAN]

Too much carbon fiber for me. I don't like this at all. Then on top of that they charge you $500,000 on top of the price of the car and then GLUED the rear fenders on.

They glue alot more cars together than you might think. the bonds they use now are stronger and lighter than welding or rivets.As for the car, I like it but not for the buy in and I would paint it just to sneek up on people

[Jecht]

The engine bay looks like it would be really fun to work in.

[VooDooXII]

The engine bay looks like it would be really fun to work in.

They do that so you can't work on them yourself...heh.

[a94civicex]

i think its SICK.....

[bloodline]

thats alot of damn carbon fiber! the red in the interior looks corny as shit...

[Drummerboy]

I've seen a CB7 with a CF lined bay, a B series CF valve cover, and a civic with a CF wrapped CAI. If they're going as far as they did with the CF, why not add those touches to the bay? lol.

[DustnU]

I think it looks SICK!! Though if it were painted it would look REDICULOUS!!!! IMO +repps

[Nerdsrock22]

Everything Mansory has made thus far looks horrible.

This.

An Aston should be sleek, sexy, and somewhat understated.

[eraser4g63]

DO NOT WANT!!!

[VooDooXII]

This.

An Aston should be sleek, sexy, and somewhat understated.

I think the DBS is the upper limit of how much bodywork you can add to an Aston Martin before it gets vulgar.

[EJ25RUN]

I think the DBS is the upper limit of how much bodywork you can add to an Aston Martin before it gets vulgar.

Proper Aston.

[Genji-Sama]

Call me a ricer, but thing is friggin sick

[On_Her_Face]

I'd take it as a Wednesday car.

[vubuilt]

it is beautiful!! should have limited the carbon fiber in the interior.

[JF868849]

thats cool as hell