no Mo Rain..

[S197_GTvert]

so i got out and cleaned the car off


The day i got her

and how she sits as of today















and a pic of the day we went to the track lol steelies on the rear FTW

[blown lsj]

Cool but that bad boy needs to be low...

[S197_GTvert]

Cool but that bad boy needs to be low...

working on it haha these cars being so damn heavy springs are a biotch to get

[G.C]

Lol.......

[quickdodge®]

working on it haha these cars being so damn heavy springs are a biotch to get

Heat them. That's what I did.

Also, car would look good if you put the factory side lights back on there and got rid of those clears. Looks horrible, like you have clear Civic lights on there. Later, QD.

[Mr. Clean]

isn't this a repost?

[quickdodge®]

Isn't your face a repost? Later, QD.

[allmotorX]

lol^^clean vic!

[JITB]

Id def look into getting them heated, if a good spring option is far fetched. The corners dont look too bad in person.. they look real blingy in the pictures tho. I think getting rid of that gap.. would do wonders for the car.

[punkr6]

My Grand DaD rolls in one of these...

[quickdodge®]

Id def look into getting them heated, if a good spring option is far fetched. The corners dont look too bad in person.. they look real blingy in the pictures tho. I think getting rid of that gap.. would do wonders for the car.

Damn right. $10 and you have yourself a dropped ass ride. As far as the clears? U-G-L-Y. They ain't go no alibi, they ugly. Hey, hey, they ugly! Lolol. Gotta get that amber back in there. Cars like that do not look good with ricer lights. Later, QD.

[D3UC3S]

yeah...what mike said!

Lose the lip as well...it looks as if your trying to mimic a civic

These cars are very intimidating

[LongLiveH2b]

lol^^clean vic!

of course....vics are your favorites!

[S197_GTvert]

Heat them. That's what I did.

Also, car would look good if you put the factory side lights back on there and got rid of those clears. Looks horrible, like you have clear Civic lights on there. Later, QD.

eeh considering i payed $100 less fot these than a set of stockers from ford im happy lol they arent as bad in person and the only reson they got changed was due to a semi kicking up a nice sized rock and shattering the drivers side corner lamp and headlight

isn't this a repost?

Id def look into getting them heated, if a good spring option is far fetched. The corners dont look too bad in person.. they look real blingy in the pictures tho. I think getting rid of that gap.. would do wonders for the car.

heated was one of the options id just rather do it the right way and order a custom set of springs no point in getting the heated and running the risk off fucking them up ya know what i mean...

My Grand DaD rolls in one of these...

your grandad is Thuggin













thnx for all the comments guys

[JITB]

Dont be scared of the heat... how much are the custom sp[rings gonna cost?"

[S197_GTvert]

Dont be scared of the heat... how much are the custom sp[rings gonna cost?"

they arent to expensive they want 275 for the rears since they have a pig tail at the top and bottom of the spring which wont allow them to be cut and 200 for the fronts or i can just cut mine since ther is only one pig tail


and if i was to cut the rears and go to civilian springs it would bring the back end down 1/4 to 1/2 an inch and cut a coil of the front it would give me this

[Nemesis]

loving the vic man

[quickdodge®]

heated was one of the options id just rather do it the right way and order a custom set of springs no point in getting the heated and running the risk off fucking them up ya know what i mean...

No I don't know what you mean, lolol. Considering I've run heated springs on all my cars since the mid 80s, it isn't as bad as you think. Lolol. Later, QD.

[S197_GTvert]

No I don't know what you mean, lolol. Considering I've run heated springs on all my cars since the mid 80s, it isn't as bad as you think. Lolol. Later, QD.

eh maybe its all the horror story's ive heard over on the vic forums about heated spring screwing up and stuff

[swollix]

This is rice at its purest,lol. It keeps improving every time I see it, keep up the good work.

[87 Turbo II]

No I don't know what you mean, lolol. Considering I've run heated springs on all my cars since the mid 80s, it isn't as bad as you think. Lolol. Later, QD.

I've seen lots of cars that didn't drop evenly because heating is hard to control all the factors of. So I am guessing there is a right and a wrong way to do it to make sure that you won't end up with one corner lower than the rest?

[Nemesis]

why not just buy a set of eibachs for a hundred or so dollars, and not be ghetto lol

[S197_GTvert]

This is rice at its purest,lol. It keeps improving every time I see it, keep up the good work.

thank u sir

why not just buy a set of eibachs for a hundred or so dollars, and not be ghetto lol

eiabach doesnt make springs for crown vics they only make fronts for the civilian cars and Marauders since they have air ride in the rear they can set it to level the car out to mach the newley lowered front and i dont have rear air suspension

[JITB]

they arent to expensive they want 275 for the rears since they have a pig tail at the top and bottom of the spring which wont allow them to be cut and 200 for the fronts or i can just cut mine since ther is only one pig tail


and if i was to cut the rears and go to civilian springs it would bring the back end down 1/4 to 1/2 an inch and cut a coil of the front it would give me this

Cutting springs on crown vics seems like its very common, in the earlier years. But i see alot of them were talking about a ride height control in the rear? I highly doubt eibachs will get you as low as it looks like you want to be. And it seems like cutting is the thing to do when it comes to lowering these cars.

i like this one!

[S197_GTvert]

yea its much easier to lower pre 02 cars as the suspension got a major revamp in 03 just like the new edge to the new S197 mustangs they went from low offset wheels and out board springs to high offset and inboard shocks and i know that guy is car is rather low, im only looking for about 1 1/4 in the front and 1 in the rear

exactly like this

[JITB]

Are those on the eibach springs?

did u try
coilspring.com?

[S197_GTvert]

Are those on the eibach springs?

did u try
coilspring.com?

yea and the rears are from coilsprings.com thats where im ordering my set from

[JITB]

then thats cool.. can u get custom height springs thru them?"

[S197_GTvert]

then thats cool.. can u get custom height springs thru them?"

yea u just give them ur spring code and they can custom make them as stiff or however u want them

[JITB]

yea u just give them ur spring code and they can custom make them as stiff or however u want them

what u trying to do make the car perform better or sit nice?

[1SICKLEX]

Here is a Mercury Maurader with BBS LMs.... since both cars are similar!

[S197_GTvert]

what u trying to do make the car perform better or sit nice?

handle better since i take the car on quite a few mountain runs it already has thicker sway bars

[quickdodge®]

So I am guessing there is a right and a wrong way to do it to make sure that you won't end up with one corner lower than the rest?

Exactly.

OP, I'm sure the car is going to look good once it is down there, however you do it. And the "horror stories" you've heard are just that. Stories, lolol. Twenty years of heating under my belt and not one problem. But if you can do it the right way, by all means do so.

Keep up the good work, man. Later, QD.

[leobond001]

i cant beleive im aying this, but the cobra wheels make that thing look nice

[Brian*]

put these on it... now.

[Brian*]

Exactly.

OP, I'm sure the car is going to look good once it is down there, however you do it. And the "horror stories" you've heard are just that. Stories, lolol. Twenty years of heating under my belt and not one problem. But if you can do it the right way, by all means do so.

Keep up the good work, man. Later, QD.

I've had three myself, 80 Cutlass sup., 91 Integra, 64 Impala... I only had the Impala ones done for 3 days though, I ordered real springs for it...

[S197_GTvert]

Exactly.

OP, I'm sure the car is going to look good once it is down there, however you do it. And the "horror stories" you've heard are just that. Stories, lolol. Twenty years of heating under my belt and not one problem. But if you can do it the right way, by all means do so.

Keep up the good work, man. Later, QD.

thanks man

i cant beleive im aying this, but the cobra wheels make that thing look nice

put these on it... now.

when the cash comes its either those or bullitts