Page 1 of 3 123 LastLast
Results 1 to 40 of 118

Thread: Little project I am working on right now.

Hybrid View

  1. #1
    Sorry boucha luck! Athens_Red_Rexin's Avatar
    Join Date
    Aug 2007
    Location
    Athens
    Age
    39
    Posts
    1,356
    Rep Power
    21

    Default Little project I am working on right now.

    Check out last page for 2012 updated pics!

    Well I built this first chopper when I was 16, and I was just learning how to weld and bend pipe. So needless to say the first one wasn't perfect! It had a 5 hp briggs motor on it and a suicide brake. I had taken the engine off and figured I would take a pic of it before I threw it away. Here it is...



    My brother got a 8 hp Honda engine that he was gonna rebuild and put on a go kart or something, and he decide he didn't want it. So it got me thinking I should redo my chopper. Then I was like hell, I'll just build another one. So I figured I would post up some of the progress on it. It's fun building this stuff from scratch. You get to decide how every little thing is gonna look and it's challenging.

    Here is the front forks and head tub and bars.





    And the front drop outs for the front wheel.



    Here is just a little mock up to get an idea of the stretch and ride height and seat height and where the engine will be.



    Here is the engine torn down to the block. So I can hone the cylinder and put in the new rings.



    I had to cut 2 inches of the crankshaft off because it's built for a cement mixer so it's extra long. I got in my new clutch and got the chain lined up.



    And here's after today. I built the top tube and figured out the bottom of the frame. And got a seat. Here is kinda what it will look like. Still lots of figuring and changing to do.





    This the the pipe thats gonna connect the two lower pipes to the head tube. This was fun to make fit.




    I will defiantly be keeping this thread updated with new pics until I get it done. Thanks for any comments!
    Last edited by Athens_Red_Rexin; 09-08-2012 at 10:01 PM.

  2. #2
    Новак 5speed's Avatar
    Join Date
    Jan 2009
    Location
    Conyers, GA
    Age
    37
    Posts
    3,386
    Rep Power
    22

    Default

    cool, looks like alot of fun! I met a guy at VIR recently who did the same thing and it was pretty cool.

  3. #3
    under construction Da_unknown's Avatar
    Join Date
    Sep 2006
    Location
    BK ALL DAY
    Age
    42
    Posts
    5,168
    Rep Power
    27

    Default

    cool project
    GECKO SQUAD MEMBER
    MSS RACING REPRESENTA.....
    the saga continues....

  4. #4
    Senior Member
    Join Date
    May 2006
    Age
    39
    Posts
    4,313
    Rep Power
    25

    Default

    hell ya buddy

  5. #5
    livin again collins's Avatar
    Join Date
    Mar 2005
    Location
    chillin in the sloooo gtoooo
    Age
    41
    Posts
    16,604
    Rep Power
    43

    Default

    thats really cool!!! def keep the progress updated

  6. #6
    Sorry boucha luck! Athens_Red_Rexin's Avatar
    Join Date
    Aug 2007
    Location
    Athens
    Age
    39
    Posts
    1,356
    Rep Power
    21

    Default

    Thanks guys! I am thinking about painting the frame and gas tank a very flat army olive green with everything else black.

  7. #7
    Senior Member EM1toEVO's Avatar
    Join Date
    Mar 2004
    Location
    Athens area
    Age
    47
    Posts
    1,907
    Rep Power
    25

    Default

    I would love to be that mechanically inclined. Nice work so far!

  8. #8

  9. #9
    Certified Gearhead zspeed24's Avatar
    Join Date
    May 2009
    Location
    Douglasville
    Age
    45
    Posts
    298
    Rep Power
    17

    Default

    Looks good, I always wanted to build one of these or a little shifter cart just never have any time.

  10. #10
    Old School Joker Glides's Avatar
    Join Date
    Feb 2007
    Age
    55
    Posts
    3,741
    Rep Power
    27

    Default

    You should be able to run that rear end for a bit long as you don't beat the crap out of it. I ran a 400 small block chevy in one with a TH400 on the stock rear end for a bit before having a 9 inch put in it.

    I'm a Hardcore Old Schooler and a Rotard and I love it. Coolness above all. Rock on man.

    Edit*. Wow, completely in the wrong thread.
    Last edited by Glides; 11-16-2009 at 08:01 AM.

    Garage-Sixgun
    If you're gonna do it, overdo it.

    Dirty Octopus Photography. Magic with a shutter!

  11. #11
    Senior Member | IA Veteran Elbow's Avatar
    Join Date
    Mar 2005
    Location
    Atlanta
    Posts
    29,397
    Rep Power
    66

    Default

    That's bad ass!

  12. #12
    IA Senior Member punkr6's Avatar
    Join Date
    Sep 2005
    Location
    West palm beach
    Age
    59
    Posts
    9,355
    Rep Power
    41

    Default

    sweet....
    NO ADVERTISING

    -IA MANAGEMENT

  13. #13
    Senior Member G.C's Avatar
    Join Date
    Aug 2007
    Location
    Forgot
    Age
    35
    Posts
    4,781
    Rep Power
    25

    Default

    awesome man. reps. and subscribed.
    :idb:

  14. #14
    I <3 My EP!! EP3Hatch's Avatar
    Join Date
    Mar 2008
    Location
    Pike County
    Age
    46
    Posts
    299
    Rep Power
    18

    Default

    Great project!

  15. #15
    ccw replicas
    Join Date
    Aug 2007
    Location
    kennesaw
    Age
    38
    Posts
    4,355
    Rep Power
    27

    Default

    chrome that shit

    HF

  16. #16
    Sorry boucha luck! Athens_Red_Rexin's Avatar
    Join Date
    Aug 2007
    Location
    Athens
    Age
    39
    Posts
    1,356
    Rep Power
    21

    Default

    ^I wonder how much that would cost me to have it dipped in chrome? I was gonna go with the frame and gas tank in a very flat army olive green. And the engine, seat, wheels, bars would all be black.

  17. #17
    aye bro .:Stirfry:.'s Avatar
    Join Date
    Jun 2007
    Location
    Warner Robins
    Age
    35
    Posts
    4,344
    Rep Power
    26

    Default

    Subscribed
    ive always wanted to do a lil project like this:
    reps

    ATL DAsquad Member #9

  18. #18
    WillAgreeForReps!!
    Join Date
    Jan 2008
    Location
    The Town of Lula
    Posts
    2,111
    Rep Power
    21

    Default

    cool project!

  19. #19
    Sorry boucha luck! Athens_Red_Rexin's Avatar
    Join Date
    Aug 2007
    Location
    Athens
    Age
    39
    Posts
    1,356
    Rep Power
    21

    Default

    Well here is what the frame will look like. I was gonna cut the bottom tubes where they meet the big pipe coming off the head tube at 45's to make them fit it. But I like the way they look just butted up against it. I am gonna make some filler pieces to make them flow into the big pipe.




  20. #20
    Senior Member ueyedgr8tness's Avatar
    Join Date
    Jul 2006
    Location
    buford ga
    Age
    39
    Posts
    4,685
    Rep Power
    29

    Default

    looking nice
    I check sluts off my list like a maintnence man
    I drive a low is3 just so it gives me a reason to drive super slow on these rough ga roads.

  21. #21

    Default

    Badass Is that exhaust tubing?

  22. #22
    Sorry boucha luck! Athens_Red_Rexin's Avatar
    Join Date
    Aug 2007
    Location
    Athens
    Age
    39
    Posts
    1,356
    Rep Power
    21

    Default

    Thanks everyone, I really appreciate it!!!




    Quote Originally Posted by slow_hatch View Post
    Badass Is that exhaust tubing?
    Yes sir it is.

  23. #23

    Default

    Quote Originally Posted by Athens_Red_Rexin View Post
    Thanks everyone, I really appreciate it!!!






    Yes sir it is.
    Awesome

  24. #24
    Sorry boucha luck! Athens_Red_Rexin's Avatar
    Join Date
    Aug 2007
    Location
    Athens
    Age
    39
    Posts
    1,356
    Rep Power
    21

    Default

    ^Thanks bro!

  25. #25
    desde lejos.... Franco Tirador's Avatar
    Join Date
    Aug 2006
    Location
    hang a left, make a right and you're there
    Age
    40
    Posts
    2,712
    Rep Power
    23

    Default

    much respect for knowing what you are doing, cant wait to see the finish product

  26. #26
    Jones Style xdavidscenex's Avatar
    Join Date
    Oct 2006
    Location
    Warner robins ,Ga
    Age
    35
    Posts
    2,619
    Rep Power
    23

    Default

    good stuff man!!!!

  27. #27
    notaNOOB 0CT 2005 cleanion31's Avatar
    Join Date
    Aug 2009
    Location
    Norcross, GA
    Age
    39
    Posts
    251
    Rep Power
    17

    Default

    shit man u are talented good shit man keep us posted
    .......................

  28. #28
    IA Member
    Join Date
    Apr 2009
    Age
    36
    Posts
    62
    Rep Power
    17

    Default

    bad ass

  29. #29
    TOYOTA TACOMA!!!! 1990wade's Avatar
    Join Date
    Feb 2009
    Location
    BETWEEN MACON AND DUBLIN
    Age
    35
    Posts
    2,778
    Rep Power
    20

    Default

    awesome man





    I DRIVE A TRUCK THEREFORE MY DICK IS BIGGER THAN YOURS....

  30. #30
    Bad Luck kID FAM0U5's Avatar
    Join Date
    Dec 2008
    Location
    Atlanta
    Age
    37
    Posts
    2,247
    Rep Power
    20

    Default

    looks good soo far

  31. #31
    IA Member FLIPside's Avatar
    Join Date
    Oct 2005
    Age
    47
    Posts
    136
    Rep Power
    20

    Default

    you do that son ! f ' n sweet man, i'm in

  32. #32
    Sorry boucha luck! Athens_Red_Rexin's Avatar
    Join Date
    Aug 2007
    Location
    Athens
    Age
    39
    Posts
    1,356
    Rep Power
    21

    Default

    I work on it a little everyday on my lunch break at work. So it's slow progress. I'll post up some more pics this afternoon. I welded the frame together today. And I am making the drop outs for the back wheel axle.

  33. #33
    ☠gOOn☠ Brian*'s Avatar
    Join Date
    Nov 2005
    Location
    ☠Young Harris☠
    Age
    40
    Posts
    6,809
    Rep Power
    29

    Default

    hell yeah, looks like fun!

  34. #34
    IA Member slide_or_die's Avatar
    Join Date
    Mar 2007
    Age
    34
    Posts
    24
    Rep Power
    0

    Default

    damn i want the cutlass!!

    ITS NOT GONNA WORKK!!!! LOL

  35. #35
    Sorry boucha luck! Athens_Red_Rexin's Avatar
    Join Date
    Aug 2007
    Location
    Athens
    Age
    39
    Posts
    1,356
    Rep Power
    21

    Default

    Here is today. Getting closer! Making the drop outs for the rear wheel tomorrow.









    I made these to fill the holes before I left today.


  36. #36
    aye bro .:Stirfry:.'s Avatar
    Join Date
    Jun 2007
    Location
    Warner Robins
    Age
    35
    Posts
    4,344
    Rep Power
    26

    Default

    good stuff man keep it up.

    ATL DAsquad Member #9

  37. #37
    Sorry boucha luck! Athens_Red_Rexin's Avatar
    Join Date
    Aug 2007
    Location
    Athens
    Age
    39
    Posts
    1,356
    Rep Power
    21

    Default

    Well made these Friday, just have to make the spacers for the rear wheel now. Not much left now, seat, throttle, brakes, and paint. Maybe I can go on a test ride next week!




  38. #38
    Sorry boucha luck! Athens_Red_Rexin's Avatar
    Join Date
    Aug 2007
    Location
    Athens
    Age
    39
    Posts
    1,356
    Rep Power
    21

    Default

    Well it's finally coming together. Not much left now!!! I have already ordered the chain. It should be in this week. Gonna start working on a seat mount tomorrow.








  39. #39
    Senior Member | IA Veteran Elbow's Avatar
    Join Date
    Mar 2005
    Location
    Atlanta
    Posts
    29,397
    Rep Power
    66

    Default

    That's bad ass! Bring it to the meet!

  40. #40
    Sorry boucha luck! Athens_Red_Rexin's Avatar
    Join Date
    Aug 2007
    Location
    Athens
    Age
    39
    Posts
    1,356
    Rep Power
    21

    Default

    ^Alright will do!

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!