her it is.
her it is.
--TEAM FUCT OG--
07' moomba outback v
02' Xterra
01' IS 300
more.....
--TEAM FUCT OG--
07' moomba outback v
02' Xterra
01' IS 300
JDM y0!!No really, I like it--- very clean car.
![]()
♥
Cleaann just like your old boosted mirage
Hooray for cheap Corbeau seats!!I had the same one in my MSM. Ride looks good man.
![]()
pimp tyt3
:boobies:
looks good
YEA...IM AN ASSHOLE
Saw at nopi. looks damn good. i like the trunk set up.
My 2001 Acura 3.2CL Type-S
Val for president!
Yes, I would have voted for her.
In loving memory of Valerie Antranikian.
nice! was thinking about powdercoating my rims like that...But I'm Berlina and that would be a little too much black...
Hottness
Val For President
R.I.P. Our Dear Leisa..
ASAP N.E. Chapter VP
No more supra
__________________________________________________ ________________________________________
NIKON Squad member| NikonD40
ahh, shakespeare, you mean your NEW turd! i thought you were posting pix of the little mitsu that could. lol. lookin hot man.
Originally Posted by Ran Kizama
Allen has them in his talon that is rotting away.![]()
Nice s2000. Like the tag.
Looking good shakespeare. I like the trunk setup very clean and nice. Also I like the plate, good idea.
Leisa and Val May You Rest In Peace!
362 WHP
401 WTQ NO NITROUS
i kinda wish i woulda found a black one.. triple black is the hotness... black interior ,paint, and wheels... mmmmmmmOriginally Posted by single_cam_ham
--TEAM FUCT OG--
07' moomba outback v
02' Xterra
01' IS 300
lol...wanna trade?Originally Posted by ATLS2K
![]()
wow you weren't kidding...what a turd
Tight!
Leisa and S. 4 Life NM?
god damn........fantastic
tag is hot.nice wheels
were you on barret last night by chance?
i saw a s2000 that looked alot like yours driving up and down barret
nope dont head out to barret....
--TEAM FUCT OG--
07' moomba outback v
02' Xterra
01' IS 300
tempting... if your serious hit me up with a pmOriginally Posted by single_cam_ham
--TEAM FUCT OG--
07' moomba outback v
02' Xterra
01' IS 300
Hey- do you guys know how to do that top down mod? I really need it!
G37s 6MT/coupe
Sorry to jack the post...but just trying to help a fellow s2ker!Originally Posted by bludprix
Several people have asked me for the 'trick' to bypassing the speed sensor and/or e-brake lockouts on the convertible top module, so I thought I'd make this post as a reference. If you've ever been stuck in a sudden rain storm, you quickly realize how stuipd it is to have to come to a complete stop to put the top up. DO NOT operate your top at speed -- you WILL break something. Do this mod at your own risk. I accept no responsibility for any damages you may cause by doing this mod or by operating your top while not completely stopped. That said, here goes:
Pull the bottom dash panel on the passenger's side. Be careful, as this panel is sometimes a pain take off with out breaking a clip or the panel itself. Here's a pic of the back side of the panel. The yellow circles indicate the location of the 6 clips that hold it in place:
[PHOTO=69302]
The box in the attached picture is the convertable top module:
[PHOTO=235608]
The connector on the right has one of the wires you are interested in. The white w/ black stripe wire is the speed sensor. If you cut or remove that wire, you can put the top down while moving with the e-brake pulled up 'one click' -- just enough to activate the 'brake' light on the instrument console. You can actually unplug and pry open the connector and remove the wire and pin from the connector -- that way if you want to put it back to stock you can just re-insert the pin instead of pulling out the soldering iron. If you have Modifry's DCI and are using the speed-sensitive volume function, you will need to make the cut BETWEEN your splice to the DCI and the pictured connector. Removing the pin from the connector without cutting the wire will also work with the DCI.
If you want to eliminate the e-brake 'one click trick', you will need to tap a switched ground into the GREEN/WHITE wire on the left-hand connector. It is not visible in the above pic, because it is covered by the green/red wire. DO NOT CUT the green/white -- just tap into it with a switched ground. Grounding the green/white wire will cause the 'BRAKE' light on your gauge cluster to come on, and your top will operate, assuming you have also bypassed the VSS or are stopped.
EDIT: I have edited this post and the above picture to correct errors posted below as of 6/9/2005.
all of the above photos were shamelessy stolen from Modifry's website: http://www.baustnet.com/honda/mods/
Originally Posted by ATLS2K
you want a berlina that bad huh?!? Let me think about it!
Oh yeah, p.s., the pics didn't work (obviously)..just check out that site listed...
the seats & belts look familiar.
Told ya its looking great on saturday......
trythefly
-----------------------
I think we should ger out own little section....lol just kidding. It doesn't seem very hard. I think I might do it. It doesn't seem like there is too much to mess up. I got the pics off of s2katl to complete the DIY.
G37s 6MT/coupe