Post your custom exhaust:

**rbf** · 10-22-2008, 11:24 AM

I of course have no custom exhaust so no pictures from me.I am however interested in seeing everyone else's set-up.I'd like to see an exhaust that actually functions and provides for the engine no bolt-on catbacks unless it has been modified POST UP!.

This is not a Honda specific thread,I'd like to see pretty much any car's exhaust as long as it looks good and not hanging on the ground with a clothes hanger.

**PURP** · 10-22-2008, 11:31 AM

mine is welded to the cat.... and free flows to the back.... bends are the same as stock so you need no pics...

**Ruststang** · 10-22-2008, 11:59 AM

Magnaflow res's and Magnaflow Muff's made at G&S Muffler
http://s42.photobucket.com/albums/e3...nt=lexus-3.flv

**MR.EM1** · 10-22-2008, 12:15 PM

FAIL!!!!!!!!!

**LIKEG6** · 10-22-2008, 02:15 PM

OLD

Now I have a turboII muffler out to a stock looking stainless tip like in my sig(pic without the tip)

**rbf** · 10-22-2008, 03:06 PM

Originally Posted by T2KU

OLD

Now I have a turboII muffler out to a stock looking stainless tip like in my sig(pic without the tip)

Looks liked it scraped alot?.

**silverDA** · 10-22-2008, 04:59 PM

mine/

**bb4pimp** · 10-22-2008, 05:06 PM

ebay n1 style muffler

**LIKEG6** · 10-22-2008, 05:41 PM

yea it did scrape a lot cause I had the pipe ran under the fuel tank but now it's back to the stock location

**tdurr** · 10-22-2008, 07:28 PM

N1 style can by "Number One" company, and then custom 2.25in pipe with a high flow cat + 1 rez.

**SpooL'DGsR** · 10-22-2008, 07:50 PM

heres my 3 inch turbo-back into a apexi turbo n1

**rbf** · 10-22-2008, 10:46 PM

Originally Posted by sc61equipped

heres my 3 inch turbo-back into a apexi turbo n1

that car looks sick!.

**rbf** · 10-22-2008, 10:47 PM

Originally Posted by bb4pimp

ebay n1 style muffler

has to be the cleanest/lowest Prelude I've seen,Looks amazing.

And your selling this?

**87 Turbo II** · 10-22-2008, 10:52 PM

-Racing Beat Road Race Header
-Custom Straight pipe (and I mean STRAIGHT) tapped for 5th and 6th port backpressure feed
-Racing Beat Powerpulse muffler.

No air pump, no cats, no presilencer

Meets all your requirements, is custom, is VERY functional, and isn't just a catback.

**bb4pimp** · 10-22-2008, 11:37 PM

Originally Posted by ed7_hatch

has to be the cleanest/lowest Prelude I've seen,Looks amazing.

And your selling this?

i was selling it, but i decited to keep it, and thanks for the complement

**rbf** · 10-23-2008, 12:23 AM

Originally Posted by bb4pimp

i was selling it, but i decited to keep it, and thanks for the complement

No problem car is nice.

**h23bb2** · 10-23-2008, 10:52 AM

Tsudo N1 off ebay was the first setup. Loud and annoying not to mention ugly as fuck.

Next (and current) setup was the ebay piping (2.5" mandrel bent w/resonator) no cat and Vibrant flat black muffler. Its the Sh*t! lol

And yes, GAbb4- I mean bb4pimp- has one of the cleanest ludes on the planet. lol

**DeeAOne** · 10-23-2008, 10:55 AM

i had one. a 2.5 inch straight pipe with two resonators to a side exit. short and light, but quiet.

ill get a picture later today.

**DieselNuts** · 10-23-2008, 11:01 AM

I need to get a real catback damnit...enough of this weld in muffler crap.

**rbf** · 10-23-2008, 03:21 PM

Originally Posted by DieselNuts

I need to get a real catback damnit...enough of this weld in muffler crap.

@ your signature.

**blackboi50** · 10-23-2008, 03:30 PM

i thought he said custom exhaust!!???

.....all i see are ebay exhaust and regular shit!!!

.....1

**haynbtu** · 10-23-2008, 03:39 PM

nobody got side exhaust on their car that actually looks good.

**tdurr** · 10-23-2008, 03:43 PM

only bolts are after the headers... custom enough for joo!! muahhahaha

**blackboi50** · 10-23-2008, 03:50 PM

^^^thank you!!!! now thats custom!!!

.....1

**bb4pimp** · 10-23-2008, 03:54 PM

my exhaust is custom because i welded the whole exhaust from the headers and angled the muffler

**LIKEG6** · 10-23-2008, 04:26 PM

mine is completely welded together no flanges or anything, no cat, a flex pipe and a small resonator then the turboII muffler

I can't decide what I want to do next

I have had I think 6 different setups on mine lol

**FasTech** · 10-23-2008, 04:32 PM

I have no exhaust......lolol

Except the stock one laying on the ground outside!

Yes I'm a ricer

Soon to come: Buddy Club Spec 2

**rbf** · 10-23-2008, 04:45 PM

All look pretty good,I like the BC spec-2's.

**DeeAOne** · 10-23-2008, 04:48 PM

here is a picture of my side exit. sounded very good. 2 resonators, no cat or muffler. just imagine that my car isnt fucked up and still has my wheels on it. lol

**rbf** · 10-23-2008, 04:52 PM

Originally Posted by DeeAOne

here is a picture of my side exit. sounded very good. 2 resonators, no cat or muffler. just imagine that my car isnt fucked up and still has my wheels on it. lol

Still sorry to hear about the DA but your exhaust seemed to take a beating and hold up.

**DeeAOne** · 10-23-2008, 04:58 PM

yeah its coming off and going on the next one. took too much time and welding wire to just throw it away. lol

personally, i liked it. something different. thats why im keeping it.

**rbf** · 10-23-2008, 05:19 PM

Originally Posted by DeeAOne

personally, i liked it. something different. thats why im keeping it.

That is all that really matters.

**Nang** · 10-23-2008, 08:19 PM

my spec2 that is FS

**uproot** · 10-23-2008, 08:22 PM

**LIKEG6** · 10-24-2008, 11:40 AM

Originally Posted by uproot

**rbf** · 10-24-2008, 12:19 PM

That can not be good if it got stuck in there.I'd never look in my exhaust for a cat haahaa

**Hayes21890** · 10-24-2008, 12:38 PM

that is my 2.5 inch pipe from headers back with no cat or res or CEL

**rbf** · 10-24-2008, 12:57 PM

Originally Posted by Hayes21890

that is my 2.5 inch pipe from headers back with no cat or res or CEL

I'd like to see more of this car.

**d16_turbo** · 10-24-2008, 01:08 PM

here is mine 4" exhaust

**h23bb2** · 10-24-2008, 01:10 PM

^^ what he said!!!!!!!!!!

Thread: Post your custom exhaust:

Thread Tools

Display

Post your custom exhaust:

Posting Permissions

About us

Announcement