I think the lip is fine! Just need some different wheels and the drop is perfect.
I think the lip is fine! Just need some different wheels and the drop is perfect.
"Damn, Its Tyler"RaceReadyDevelopments
The lip does sit out a little more than I thought it would. I attached it over top of the old bumper, as it is double sided taped on, so it sticks out a little but that was the best it would fit. The fitment is pretty good around all the corners but I just have to figure out a way to permenantly attach it to the lower valance instead of the tape so it's not stolen if I ever park it somewhere besides work and home. The color is slightly off from the car, barely noticeable but I CAN tell so it will have to be repainted eventually. I used Fusion paint and it is VERY close but not Duplicolor so I will prolly wet sand it and respray it. It's nice and shiny and looks professional cause I would paint a coat, wet sand it, paint another wet sand it and then finally clear coat over it. It turned out really smooth and shiny, just the wrong shade of red. Not exactly Milano Red. But VERY durable paint. Not easily scratched like the Duplicolor will be when I re-paint.
The wheels- well I have another set that look REALLY good on it but I got to get tires for the wheels.
Here is a pic of them
I beleive they are Mugen replica's, but not sure.
Can't drop it anymore, they are 2.5" front and 2.25" R Skunk2 springs. Also that is the absolute lowest I can go because my driveway is gravel past the house so I am already scraping the road like a train with a plow.![]()
I did find that when I dropped it that the rear driverside strut is blown and slightly bentso that is the next thing is to replace the rear struts with some nicer ones and cut the bump stops for more travel.
i did also break the bolt off that attaches the reear strut to the LCA on the driverside Gonna have to cut it off when I replace them.
![]()
Oh, after i get an alignment of course.
01' Mercedes C320 $10500 o.b.o. or trade 4 G35 coupe
http://www.importatlanta.com/forums/...9#post38098929