battleship grey would be kool if you can make it flow with everything else on the car. are your fittings black? if so i think it would work well. if they are red/blue maybe not.
battleship grey would be kool if you can make it flow with everything else on the car. are your fittings black? if so i think it would work well. if they are red/blue maybe not.
donny - thanks man, ya ive been working pretty hard at it, im waiting to get my brake lines stuff in so i can get everything mocked up for the final stage, might have to do some bassboat :p
- taylor - we might be able to work something out, call me if you still have my numbah
anthony - thanks man, i really wanna do the holes, but i dont know if i can get a welder out here to do it, and i dont just wanna bondo/fiberglass it since its a semi daily driver, just due to gas prices :P
Bucky - My brake line fittings are all anodized blue, but my fuel lines are black, except for the piece that goes directly on the stock hardline, but anplumbing didnt have it in black. but you can see it anyway. brake lines should be dont this weekend, ups said they should be here friiiiiday
in other news tonight ill be doing the headlight harness, and main engine plugs, and might stick the dash back in to make sure all the fuse box wiring will reach.
got some stuff dont tonight, got the lower ac brakets removed, and got the headlight harness ran, gotta extend a few things. and thats done, so this weekend after i get my brakes dont ill be putting the interior back in and goto work on the motor
just a little update of a few parts that came in today...just waiting on ANplumbing to send the rest of my sh1t
some fuel rail stuff, and my mc fittings:
coming from anplumbing is all my brake line stuff, minus the line, and my fuel line and hardline adaptor. major updates this weekend!!!
damn that pic is blurry i didnt even notice that
my other stuff came in, here are some pics of my fuel and brake accessories
NICE STUFF!
thank, expensive to...it hurts to look how much i paid for all that scrap aluminum lol, oh well it will be worth it in the end.
after playing around a little, i think this is how ill do my brake lines....now to polish the sob's out..
^ looking good man
this is one productive friday.
lookin good bro keep up the good work!!
update:
My Kitchen
The Bay, brake line pics will have to wait
a teaser of the interior line
The wiper motor, this thing was a ***** to deplug
how i ran the harness outside the car, used the stock, clips.
new motor mount so that crap wont bust again
and what i do for fun
loving the tuck brake lines man. goodluck on the build.
how much did it cost you for all the fittings stuff for the brake tuck? im doing the same thing on my db7.
i dunno, everything total was right around 300 for the brake and fuel lines. but i bought enough for more than one tuck...
check out anplumbing.com they have great customer service and prices!
i figured you spent more than that for the lines and fittings. i have way to much in my lines and stuff but its worth it. gonna keep adding. everything looks great btw
thanks man, i got a hook up from an plmbingOriginally Posted by The BUCKY
thanks man
DAMN, ****s coming along great homie...
looking good bro
GECKO SQUAD MEMBER
MSS RACING REPRESENTA.....
the saga continues....
looks good. nice to see someone do more than just clearing out there inner wheels wells...and say i got a wire tuck...lol
reps 4 u
buy my nike sb's and supras........check my threads.....
babumpbumpbump newish
brakes lines are now 100 percent done, other than taking off the bulk heads when i paint, and tightening everything
and the new valve cover, not finished yet, gonna polish the center parts, and reclear it. i know the ls is a down grade, but i figured it would be a reliable swap for right now
thanks for the comments, this weekend how ever prob wont have any updates...
my 6 day old cousin was born a month pre mature, and isnt doing so great...so not home to much..so the car will have to wait
update woohooo
so ya i got off my ass and did some work, all brake lines mocked up...i lost 2 fittings so it will have to wait from the prop to the brakes...
my bling bling lines
Far shot...now all left to do is take everything off and spray away
the interior lines
I even kept the heat
and excuse the sloppy lines inside, everything there is so tight with the heater core i have to make small adjustments
sh*ts clean
thanks man
update got home with the motor tonight...if the rain goes away tomorrow and it isnt to humid, ima paint the bay this weekend
i just got back intown lookin good bro
thanks man appreciate it
i hope to spray this weekend, but today has been overcast...and i dont think the humidity will be dried up...bleh!
waiting on my bulkheads to finish up the brake lines to the fender wells, and then i can wrap up the wire tuck, and be ready to drop the motor in once the weather is right...starting to loose time though with it getting colder
you buying the cooling plate?
nice thread.
possibly i want it, i need to sell some stuff, ive kinda got on a spending rampage here lately lol...but someone is supposed to buy my block thursday, so you will prob have a payment that night
what color you doing the bay? saw that you needed it sprayed
going with milano red, mainly cause i dont wanna risk battle ship looking like i painted the car red, and didnt paint the bay :p
ya i need it sprayed, i sold my gun about a year ago when i was getting out of the scene, and cant find anyone local to come shoot it
ill prob just order one from harbor freight to get the job done
we just finished a milano red bay. looks good. why not milano red with some fire red flake?!?!?!
i might mix some flake up with it, i havnt decided...i know next spring im going to shave the bay, so i just want something halfway clean, cause im gonna just sand it back down in about 6 months, to weld, smoooooth out
y not just do it now. nothing to it. and it will be alot easier to do it before you put all that paint on there
1. time
2. money just built me a house
3. gives me something to look foward to :p
lol
productive half a day (slept until 2 lol)
Boy am i getting antsy, im down to all the little things now...will be painting the bay wed!!!! as it appears it will be perfect weather.
so today ive been getting everything ready, cleaning, painting. im a pretty detailed person, as far as all the little things being ready. all i have left to paint is the hood release, and hood flaps. i ordered my dual core aluminum mushimuto radiator thursday!
Keep it up Beau
FUCK GRAN TURISMO EAST!! NEVER TAKE YOUR CAR THERE, ESPECIALLY NOT FOR AN ALIGNMENT!! TERRIBLE BUSINESS!!
Posting Permissions
Reply With Quote
